![]() |
Well multimodal, the 3rd bike on the 2 bike bus rack, folders are a winner..
trimet will get the longer distances done for you , and the bike gets you quickly to your bus stop. |
Originally Posted by Rick@OCRR
(Post 15215668)
All that said, while I am still on the fence on this issue, I am leaning more to the road bike side. Time will tell.
BUT, small wheel folders absolutely have their place. for mutli-moders who take the bus or who ride trains that don't allow full-size bikes, a folder can be invaluable. for people who work where full-size bikes aren't allowed indoors, a folder can be invaluable. for people in high-theft areas who squirm at the notion of leaving a bike locked up on the street, a folder can be invaluable. etc. small wheel folders are extremely versatile, but if that versatility isn't required for a specific ride, i'd rather be on one of my full-size bikes. my 2 cents. |
Originally Posted by fietsbob
(Post 15213315)
Difference? maybe to the tire, ever so slightly.. I am still moving over the ground at the same rate,
So, air resistance on my body moving though the atmosphere, remains the same.. |
Originally Posted by PatrickGSR94
(Post 15216671)
I was just referring to a significant difference in wheel rotation speed, with regards to what was mentioned above with the tires flinging stuff, and brakes wearing faster.
I can imagine that the radius of the tire affects the angle at which stuff is flung and maybe a smaller wheel flings stuff at a worse angle. I can imagine that fatter tires fling more stuff than skinnier tires. And I can imagine that on a bike with smaller wheels, the bottom bracket is closer to the ground than a bike with bigger wheels which could mean that somebody gets more stuff on them. But I don't see how rotational speed makes any difference. And if the brake pads are the same size, they should wear at the same rate (unless the rims are significantly hotter because they are smaller and therefore cause the pads to wear faster). Smaller rims will wear faster than larger ones. |
Originally Posted by cplager
(Post 15217101)
I still don't see how a tire spinning faster means it flings more stuff.
|
Originally Posted by Steely Dan
(Post 15217324)
higher RPMs means more centripetal force imparted into the particles of water and mud that spin off the wheel. a 20" wheel traveling at ~18mph will fling mud 4 ft. or more into the air. the last time i rode my folder without fenders in the rain, i was caked with mud specks, even my helmet. crap got EVERYWHERE. and it was a 20x1.25 slick tire (not particularly wide).
I agree that in principle, mud stuck on a 20" wheel is more likely to be flung off a small wheel than a large wheel following this argument. But (a) once it's flung off, it will be flung off at the linear speed of the wheel (and that will be the same speed regardless of radius) and (2) a wheel will saturate with mud relatively quickly and any new mud that gets on the wheel will come off regardless. The only other factor that I' haven't already mentioned that I can see making a real difference is if you run the 20" tire at a lower pressure so it has a wider contact patch than the larger tire. I've ridden larger tires in the rain at lower speeds and been quite covered with mud specks. Fenders are a good thing regardless of tire size. Cheers, Charles |
To the OP - tomorrow will be a great example of the folder advantage.
Advantage 1 - I'll get up in the morning and if its raining I'll catch the bus just down the street (with the folded bike inside the bus) and get dropped off 2-3 minutes (by folder) from work. Advantage 2 - After work, I'm meeting up with some friends and I'll simply fold the bike up into the corner of the pub. Advantage 3 - If I feel like riding home I will, but if not, I'll fold it up and throw it in the back of my friends truck for a ride home. This would not work with the Vaya. |
Originally Posted by cplager
(Post 15217788)
I like this line of reasoning you provided. :) But I don't it really works to cause a messier situation.
I agree that in principle, mud stuck on a 20" wheel is more likely to be flung off a small wheel than a large wheel following this argument. But (a) once it's flung off, it will be flung off at the linear speed of the wheel (and that will be the same speed regardless of radius) and (2) a wheel will saturate with mud relatively quickly and any new mud that gets on the wheel will come off regardless. The only other factor that I' haven't already mentioned that I can see making a real difference is if you run the 20" tire at a lower pressure so it has a wider contact patch than the larger tire. I've ridden larger tires in the rain at lower speeds and been quite covered with mud specks. Fenders are a good thing regardless of tire size. Cheers, Charles |
Originally Posted by PatrickGSR94
(Post 15219178)
Linear velocity may be the same, but the angular velocity is higher by however much the difference is in tire circumference. 35% higher in the case of a 20" tire vs. 700c tire.
When you fling mud off of a tire, you aren't really flinging it off of the tire so much as the mud stops sticking to the tire and keeps going whatever direction it was going in*. So it's the linear speed that matters here. Cheers, Charles * When mud flings off of a spinning wheel, it isn't the so-call centrifugal force (which is often called a fictitious force)throwing it off the wheel. Rather, it is the sudden lack of centripedal force that stops acting on the mud and therefore the mud happily moving along how it was (meaning tangentially to the wheel). |
We have now turned this thread into a discussion of college-level physics and mathematics :p
|
Originally Posted by PatrickGSR94
(Post 15219337)
We have now turned this thread into a discussion of college-level physics and mathematics :p
but it doesn't much matter because, as has been pointed out multiple times now, fenders are a very wise investment for any bike that's ridden in inclement weather. |
Originally Posted by PatrickGSR94
(Post 15219337)
We have now turned this thread into a discussion of college-level physics and mathematics :p
|
Originally Posted by Steely Dan
(Post 15219556)
an unfendered small wheel folder is considerably messier in the rain than an unfendered full-size bike at equivalent speeds.
Assuming everything being equal (mainly the friction/adhesion force of the mud on the tire but this is a complicated function of rubber compound, tread design, mud wetness and even mud composition). Assume the big wheel and the small wheel are traveling with the same linear speed, v, (such as 10 mph). Mud can only stay on the tire if there is enough centripetal force, which is provided by the friction/adhesion force. For the same linear speed, the mud on the smaller wheel needs to have a higher centripetal force to stay on because Centripetal force = m * v^2 / R, where m is the mass of the mud (same for both big and small wheel), v is the linear speed (same for both big and small wheel), R is the radius of the tire (smaller for the small wheel). So the requirement for the centripetal force is greater for the small wheel, the mud cannot "make the cut" so it flies off along the tangent. So it is like you have $100 so you can only buy a Wal-Mart blue light special for $88. The LBS $980 deal will fly you off along the tangent. Not everyone will be riding a LBS bike. |
Originally Posted by loubapache
(Post 15221121)
There is a lot of truth to that and it can be explained with physics. :)
Assuming everything being equal (mainly the friction/adhesion force of the mud on the tire but this is a complicated function of rubber compound, tread design, mud wetness and even mud composition). Assume the big wheel and the small wheel are traveling with the same linear speed, v, (such as 10 mph). Mud can only stay on the tire if there is enough centripetal force, which is provided by the friction/adhesion force. For the same linear speed, the mud on the smaller wheel needs to have a higher centripetal force to stay on because Wider/lower pressure tires will fling up more crap because of wider contact area. And folding bikes have the rider closer to the ground and that probably amplifies the effect, too. This is probably getting somewhat silly. If you're concerned, get fenders. :) |
Originally Posted by cplager
(Post 15222292)
Wider/lower pressure tires will fling up more crap because of wider contact area. And folding bikes have the rider closer to the ground and that probably amplifies the effect, too.
I haven't noticed much difference in the amount of water/dirt flung from the tires in wet conditions but haven't tried to make any kind of controlled experiment to compare. |
Originally Posted by prathmann
(Post 15222376)
My distance from the ground is determined by the length of my legs and the need for some clearance between the ground and the pedals. I doubt that there's more than an inch difference between my bikes - and I'm not sure if I'm higher or lower on my folder. I pump up my folder tires to slightly higher pressure than in my other bikes, and the tire width is in between that of my road bike and my touring bike.
I haven't noticed much difference in the amount of water/dirt flung from the tires in wet conditions but haven't tried to make any kind of controlled experiment to compare. Cheers, Charles * I set my seat height based on what's comfortable to pedal, and then hope that I can get a foot down. If you set your seat height based off of getting the same amount of foot down regardless of bicycle type, then, yes, you'll be the same height regardless. |
I was fitted to my road bike by the LBS shop owner, and then replicated the pedal spindle-to-saddle height on my MTB. The MTB has a higher BB so that means the saddle itself is higher off the ground than on the road bike. Similar thing would happen on a folder with small wheels I would think. If you replicate spindle-to-saddle of other bikes, then the saddle itself will end up lower to the ground. You would also have to be more careful about crank arms or pedals hitting the ground if you pedal through a turn, assuming you use the same crank arm length as on normal bikes.
|
Originally Posted by PatrickGSR94
(Post 15223727)
I was fitted to my road bike by the LBS shop owner, and then replicated the pedal spindle-to-saddle height on my MTB. The MTB has a higher BB so that means the saddle itself is higher off the ground than on the road bike. Similar thing would happen on a folder with small wheels I would think. If you replicate spindle-to-saddle of other bikes, then the saddle itself will end up lower to the ground. You would also have to be more careful about crank arms or pedals hitting the ground if you pedal through a turn, assuming you use the same crank arm length as on normal bikes.
|
Shorter length crank arms you mean? I was not aware of that. That could mess with things if you're used to a certain fit with a certain crank arm length.
|
Originally Posted by cplager
(Post 15224062)
This is basically what I would expect. I'll also note that folders generally have smaller cranks than full size bikes, so this will affect things as well.
Concerning rain and road grime in relation to small wheels... we could argue theories all day of whether small wheels or large wheels are 'messier' but my experience has been that, in the conditions I've ridden and at the speeds I ride, I've thrown taller and more voluminous rooster tails and have received larger racing stripes up my back on large wheel bikes than small wheeled bikes... but of course that argument is moot since it's advisable to use fenders anyway. ;) |
Originally Posted by -=(8)=-
(Post 15213304)
The only caveat is, its sort of hard to stand up and pedal. But, no big deal.
|
Originally Posted by daredevil
(Post 15241263)
That would be a big deal for me. I absolutely love standing. Would that be common for all folders?
|
Originally Posted by BassNotBass
(Post 15241336)
I don't see why that's really necessary when the ride isn't for competition and if the bike has a low enough gear to spin.
|
Originally Posted by Steely Dan
(Post 15216585)
i'm in the same camp. all other things being equal, i'd rather be on a full-size diamond frame bike than a small wheel folder. BUT, small wheel folders absolutely have their place.
Neither bike has fenders, by the way, so I won't get into the mud slinging that's been going on between the wheel sizes! Rick / OCRR |
Originally Posted by Rick@OCRR
(Post 15241729)
... so I won't get into the mud slinging that's been going on between the wheel sizes!...
|
| All times are GMT -6. The time now is 01:20 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.