Bike Forums

Bike Forums (https://www.bikeforums.net/forum.php)
-   Commuting (https://www.bikeforums.net/commuting/)
-   -   antifog for goggles. (https://www.bikeforums.net/commuting/926144-antifog-goggles.html)

trafficdancer 12-14-13 09:53 AM

antifog for goggles.
 
I wear a single-lens set of goggles (I got them at a surplus store. Some kind of cheap ski-type goggles) and use a rub-on antifog agent that doesn't seem to work real well once I start perspiring. Does anyone have an antifog regimen that they swear by?

Should I try a different agent? A different lens material (mine is some kind of polycarbonate)?

trafficdancer 12-14-13 10:43 AM

Hey, I stumbled across double-lens ski goggles. I may give those a try.

Jim from Boston 12-14-13 11:06 AM


Originally Posted by trafficdancer (Post 16329419)
I wear a single-lens set of goggles (I got them at a surplus store. Some kind of cheap ski-type goggles) and use a rub-on antifog agent that doesn't seem to work real well once I start perspiring. Does anyone have an antifog regimen that they swear by?

Should I try a different agent? A different lens material (mine is some kind of polycarbonate)?


Originally Posted by trafficdancer (Post 16329522)
Hey, I stumbled across double-lens ski goggles. I may give those a try.


I am a decades-long year-round, eyglass-wearing cycle-commuter in Boston, for a one-way distance of 14 miles to as low as 0° F. I've tried everything proposed in numerous threads to prevent dangerous fogging.

IMO forget the anti-fogging agents and (supposedly) well-sealed ski goggles, and opt for better-ventilated (and cheap) goggles as described in this post on the recent thread Cold Protection for Eyes…

The problems that I think are unique to cyclists, in comparison with cross country and downhill skiers, and snowmobilers is that when we ride we are breathing hard, as a cross-country skier might, but we encounter a faster oncoming wind to dissipate the moist exhalations.

Conversely, I'm pretty sure we are more forcefully exhaling a greater volume of warm moist air than downhill skiers and snowmobilers, but we do not necessarily share the faster oncoming wind effect, especially when going up hill with a further increased burden of exhaled warm moist air to disperse.

trafficdancer 12-14-13 11:36 AM

Thanks, Jim!

chaadster 12-14-13 01:40 PM

Clarity Defog It

http://www.amazon.com/Clarity-Defog-...og+it+care+kit

Does need to be re-applied regularly, but I think all anti fogs do; Clarity has a DefogIt impregnated microfiber towel that might be handy to keep in a coat pocket, or bag, or whatever.

erig007 12-14-13 02:02 PM

The technique i use is to remove my double lenses goggles every time i stop, start riding then put them back on a few seconds later. Works perfectly. While riding the wind prevent fogging. Mine are safety goggles so i have some room to move them up when i don't need them not sure it will works with bigger ski goggles.

Ekdog 12-14-13 03:07 PM

Take it from a old skin-diver. Saliva is your best bet. Cheap, effective and always at hand.

trafficdancer 12-14-13 03:50 PM

Just ebayed a pair of Smith Optics Monashee goggles. Tried finding goggles locally but they all have tinted/mirrored lenses. Does me no good because I leave the house before sunup.

AusTexMurf 12-15-13 09:14 AM

Cut a white potato…..Rub it on the inside of the lens.


Or

Drink water, rinse, swallow.
Spit in your hand.
Rub your spit on the inside of the lens.

Both old tricks from scuba diving.

trafficdancer 12-15-13 09:45 AM

So.....where does a diver keep a potato? One of my favorite jokes has a punchline about potatoes in the back of a swimsuit.

dscheidt 12-15-13 01:37 PM


Originally Posted by Ekdog (Post 16330259)
Take it from a old skin-diver. Saliva is your best bet. Cheap, effective and always at hand.

spit, potato, and special sprays, all work on the same principle. They reduce surface tension, which encorages water to form a film over the surface, instead of droplets, which scatters light less than droplets do. Spit works okay, on glass, which has a low surface tension to begin with. It doesn't work well on modern plastics, which has higher surface tensions. It also washes off quikly.

I've used a bunch of these, and haven't found one that's spectacular. There's a lot of variation based on the surface they're going on, too, so what works great on one visor might not work as well on another.


All times are GMT -6. The time now is 07:00 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.