Go Back  Bike Forums > Bike Forums > Cyclocross and Gravelbiking (Recreational)
Reload this Page >

Nashbar or Winwood CF Cyclo fork owners?

Notices
Cyclocross and Gravelbiking (Recreational) This has to be the most physically intense sport ever invented. It's high speed bicycle racing on a short off road course or riding the off pavement rides on gravel like : "Unbound Gravel". We also have a dedicated Racing forum for the Cyclocross Hard Core Racers.

Nashbar or Winwood CF Cyclo fork owners?

Old 06-07-09, 05:22 PM
  #1  
Senior Member
Thread Starter
 
coldfeet's Avatar
 
Join Date: Dec 2007
Posts: 2,118
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 1 Time in 1 Post
Nashbar or Winwood CF Cyclo fork owners?

Cross posted from General Cycling.


Anyone have one of these handy they can put a tape measure across?
They say they have clearance for 44mm knobbies, what is the actual measurement at the point whre the crown starts to curve in? What I want to know is, how wide a fender can I squeeze in there?

This fork.

https://www.nashbar.com/bikes/Product...019_-1___14500
coldfeet is offline  
Old 06-07-09, 07:16 PM
  #2  
Senior Member
 
Join Date: May 2007
Location: SW Idaho
Posts: 643
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Well, Coldfeet -

I put my Nashbar CX frame/fork in the workstand and measured as best I could with a steel rule...

At the "shoulder" where the fork legs begin to curve there is 50-52mm of clearance.

From the top of the dropouts to the inside apex of the crown measures 365mm of clearance.

I am currently running 700x35 Panaracer Pasela TG's (a touring tire) mounted to 36-spoke Mavic A719's with XT hubs on that bike. That combo leaves at least 5mm clearance to either fork leg and about 16mm clearance to the crown.

I have had some 700x40 knobbies on there with no problems (I'm running BB7 road disks). I think you could run 700x44's based on that...

The Nashbar fork is built very stout - and weighs accordingly. I use the bike as a year-round commuter and long-distance event machine. I don't race CX, so I can't comment on that application. All-in-all, I'm very happy with the fork - and the rest of the bike as well.

Hope this helps.
dwr1961 is offline  
Old 06-07-09, 07:53 PM
  #3  
Senior Member
Thread Starter
 
coldfeet's Avatar
 
Join Date: Dec 2007
Posts: 2,118
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 1 Time in 1 Post
Originally Posted by dwr1961
Well, Coldfeet -

I put my Nashbar CX frame/fork in the workstand and measured as best I could with a steel rule...

At the "shoulder" where the fork legs begin to curve there is 50-52mm of clearance.

From the top of the dropouts to the inside apex of the crown measures 365mm of clearance.

I am currently running 700x35 Panaracer Pasela TG's (a touring tire) mounted to 36-spoke Mavic A719's with XT hubs on that bike. That combo leaves at least 5mm clearance to either fork leg and about 16mm clearance to the crown.

I have had some 700x40 knobbies on there with no problems (I'm running BB7 road disks). I think you could run 700x44's based on that...

The Nashbar fork is built very stout - and weighs accordingly. I use the bike as a year-round commuter and long-distance event machine. I don't race CX, so I can't comment on that application. All-in-all, I'm very happy with the fork - and the rest of the bike as well.

Hope this helps.
Thank You! Exactly what I Needed. The problem is, ( or was ) the Marathon Supremes that I fitted ( 700 x 40 ) don't allow any room on my current fork for a fender. I had already decided to go disc anyway, so ordered this fork. I am getting the fenders from Velo Orange, but I wanted to order them now, before the fork arrives, ( tight schedule ) I wanted to be sure I could fit whatever fenders I ordered. I'm gonna go with the 48mm fluted fenders.

I am using the bike for commuting/touring and have ordered the BB7s as well.

Thanks again
coldfeet is offline  
Old 06-07-09, 08:02 PM
  #4  
Senior Member
 
Join Date: May 2007
Location: SW Idaho
Posts: 643
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
I think you're gonna be very happy with that set-up. I absolutely love my BB7's. Very adjustable, progressive and powerful. Best thing is that they don't pack with mud or snow in the winter. Work awesome with 'cross levers, too.

You'll have plenty of room with the 700x40's and the fenders should snuggle right into the arch...

Wow, I'm almost jealous!

DWR
dwr1961 is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.