roadbike to cx conversion...
#1
Junior Member
Thread Starter
Join Date: Mar 2009
Location: Glasgow, UK (Portland, OR)
Posts: 15
Bikes: Chris Kopp Ti Custom Cyclo-Cross: Chris King Headset. DT Swiss RR1.2's with Chris King Disc Hubs (32-hole), SRAM Rival shifters, Front + Rear Derailleur, BB7 Discs, Brooks B17
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
roadbike to cx conversion...
Wondering if Raceface cx cranks are Campy compatible...
going to be converting my Yeti Road Project into a Yeti ArcX (at least that's the hope) and I'll be needin' to switch cranksets, or so I believe.
Currently running 50/34 up front and 11-23 in the rear. Could I get away with using that in 'cross without making the switch?
However, if and when it seems like a good idea to switch to a 46 ring, do any of you know if Raceface's CX cranksets are Campy compatible?
Also, pretty sure I'd be getting some Paul Canti's, which level does the trick without breaking the bank?
thanks
going to be converting my Yeti Road Project into a Yeti ArcX (at least that's the hope) and I'll be needin' to switch cranksets, or so I believe.
Currently running 50/34 up front and 11-23 in the rear. Could I get away with using that in 'cross without making the switch?
However, if and when it seems like a good idea to switch to a 46 ring, do any of you know if Raceface's CX cranksets are Campy compatible?
Also, pretty sure I'd be getting some Paul Canti's, which level does the trick without breaking the bank?
thanks
Thread
Thread Starter
Forum
Replies
Last Post
Dxisocos
Cyclocross and Gravelbiking (Recreational)
8
07-06-10 08:40 AM