Go Back  Bike Forums > Bike Forums > Cyclocross and Gravelbiking (Recreational)
Reload this Page >

Rehashing: NASHBAR X Cross Frame

Notices
Cyclocross and Gravelbiking (Recreational) This has to be the most physically intense sport ever invented. It's high speed bicycle racing on a short off road course or riding the off pavement rides on gravel like : "Unbound Gravel". We also have a dedicated Racing forum for the Cyclocross Hard Core Racers.

Rehashing: NASHBAR X Cross Frame

Old 05-23-13, 03:27 PM
  #1  
Senior Member
Thread Starter
 
TheManSuit's Avatar
 
Join Date: Jan 2010
Location: Cincinnati, OH
Posts: 60

Bikes: '89 Cannondale SR300; '64-'66 Allegro Special; '83 Centurion LeMans RS; '74 Raleigh Grand Prix

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Rehashing: NASHBAR X Cross Frame

Seen quit a bit of buzz about this frame over the forums, and it's a relief (if you can call that) to see I'm not the only one shocked by minimal clearance with the chainstays - I took my build up to the LBS three months ago when I bought the frame and the mechanic was pretty amazed by it all, which was refreshing seeing as I was driving myself crazy over it.

Currently using a Shimano 5700 bb (I believe it's 108mm - says BC1.37x24 on the side, anyone help a brother out?) with 172.5 Shimano 105 Hollowtech II cranks (48/38) and A LOT (four) of shims on both (yes, both...two per-) sides of the BB cups. It was the only way I could manage to get the crank arms to clear the chainstays. I don't see anything wrong with doing so, but I've heard a lot of "no-no's" about putting shims on the non-DS.

So, anyway, to make a long story short, the fixing bolt on the Hollowtech cranks must have not been tight enough and the crank arm fell off (non-DS, of course). I got a new fixing bolt and reattached the arm, with success, though now there is an unsettling "clickclick" every time I bear down on the crank.

I feel that this is a result from the abundance of shims, as well as tension being placed on splines that may have been damaged when the crank arm fell off. Due to this, I feel unsafe taking my bike anywhere except for the 3 mile flatland trip to work and back.

So, after reading thru these forums regarding the chainstay issue on this Nashbar X Cross frames, I went ahead and bought a Nashbar ISIS bb @ 113mm and a Nashbar CR2 compact crank @ 170mm. With four 1mm shims on either side, that makes my bb length at about 112mm, so the 113mm seems to be a good choice, and I'm bound to have good clearance with a 170mm crank as opposed to the complications experienced w/ the 172.5mm that people had been having minor success with here on the forums.

I just want to get some second opinions about whether or not this is a terrible idea and if anyone else has tried something similar with success/failure?

Thanks y'all.



PS - Want to remind ya that this is simply my beater/commuter set up. I have no intention of racing or engaging in any super-strenuous riding. What is most important to me is whether or not IT WORKS, as opposed to "proper fit," which I feel is relative in most circumstances. Thanks again!
TheManSuit is offline  
Old 05-23-13, 07:24 PM
  #2  
Banned
 
Join Date: Jun 2010
Location: NW,Oregon Coast
Posts: 43,598

Bikes: 8

Mentioned: 197 Post(s)
Tagged: 0 Thread(s)
Quoted: 7607 Post(s)
Liked 1,357 Times in 863 Posts
Rather than blind guesses , take it in, have the LBS give it a Look.
fietsbob is offline  
Old 05-23-13, 10:03 PM
  #3  
Senior Member
Thread Starter
 
TheManSuit's Avatar
 
Join Date: Jan 2010
Location: Cincinnati, OH
Posts: 60

Bikes: '89 Cannondale SR300; '64-'66 Allegro Special; '83 Centurion LeMans RS; '74 Raleigh Grand Prix

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
It was the LBS mechanic who referred me to the original set up that I have now. He sold me the Hollowtech Cranks as well as the BB spacers. And as far as guessing goes, I'd say it's at least an educated guess on my behalf.
TheManSuit is offline  
Old 05-24-13, 05:39 AM
  #4  
Senior Member
 
Join Date: Jul 2007
Posts: 2,119
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
I'd post this to the mechanics forum, which gets a lot more traffic. For myself, I stay away from cranks and BBs because of all the different standards, special tools, etc.
flargle is offline  
Old 05-24-13, 12:04 PM
  #5  
Senior Member
Thread Starter
 
TheManSuit's Avatar
 
Join Date: Jan 2010
Location: Cincinnati, OH
Posts: 60

Bikes: '89 Cannondale SR300; '64-'66 Allegro Special; '83 Centurion LeMans RS; '74 Raleigh Grand Prix

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Originally Posted by flargle
I'd post this to the mechanics forum, which gets a lot more traffic. For myself, I stay away from cranks and BBs because of all the different standards, special tools, etc.

That sounds like solid advice. Thanks, flargle.
TheManSuit is offline  
Old 06-14-13, 09:21 AM
  #6  
Jet Jockey
 
Banzai's Avatar
 
Join Date: Jul 2005
Location: St. Paul, MN
Posts: 4,941

Bikes: Cannondale CAAD9, Ritchey Breakaway Cross, Nashbar X-frame bike, Bike Friday Haul-a-Day, Surly Pugsley.

Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 382 Post(s)
Liked 29 Times in 25 Posts
I have this frame.

Fits an HT2 road triple perfectly.

A double required a 2mm shim on one side.

This is with the (somewhat standard) Shimano outboard bearing systems.
__________________
Good night...and good luck
Banzai is offline  
Old 06-14-13, 09:40 AM
  #7  
Have bike, will travel
 
Barrettscv's Avatar
 
Join Date: Feb 2006
Location: Lake Geneva, WI
Posts: 12,284

Bikes: Ridley Helium SLX, Canyon Endurance SL, De Rosa Professional, Eddy Merckx Corsa Extra, Schwinn Paramount (1 painted, 1 chrome), Peugeot PX10, Serotta Nova X, Simoncini Cyclocross Special, Raleigh Roker, Pedal Force CG2 and CX2

Mentioned: 46 Post(s)
Tagged: 0 Thread(s)
Quoted: 910 Post(s)
Liked 288 Times in 158 Posts
I wouldn't add shims to a Hollowtech Crankset. Find yourself a new bike shop.
__________________
When I ride my bike I feel free and happy and strong. I'm liberated from the usual nonsense of day to day life. Solid, dependable, silent, my bike is my horse, my fighter jet, my island, my friend. Together we will conquer that hill and thereafter the world.
Barrettscv is offline  
Old 06-14-13, 10:01 AM
  #8  
Jet Jockey
 
Banzai's Avatar
 
Join Date: Jul 2005
Location: St. Paul, MN
Posts: 4,941

Bikes: Cannondale CAAD9, Ritchey Breakaway Cross, Nashbar X-frame bike, Bike Friday Haul-a-Day, Surly Pugsley.

Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 382 Post(s)
Liked 29 Times in 25 Posts
Originally Posted by Barrettscv
I wouldn't add shims to a Hollowtech Crankset. Find yourself a new bike shop.
Up to one 2mm shim won't hurt anything on a road BB.

Their MTB BBs use a series of shims to space, depending on bike setup.

On my Nashbar frame, the triple fits fine without, and the double needed just one so that the right crankarm didn't clip the chainstay whilst pedaling.
__________________
Good night...and good luck
Banzai is offline  
Old 06-14-13, 10:07 AM
  #9  
Have bike, will travel
 
Barrettscv's Avatar
 
Join Date: Feb 2006
Location: Lake Geneva, WI
Posts: 12,284

Bikes: Ridley Helium SLX, Canyon Endurance SL, De Rosa Professional, Eddy Merckx Corsa Extra, Schwinn Paramount (1 painted, 1 chrome), Peugeot PX10, Serotta Nova X, Simoncini Cyclocross Special, Raleigh Roker, Pedal Force CG2 and CX2

Mentioned: 46 Post(s)
Tagged: 0 Thread(s)
Quoted: 910 Post(s)
Liked 288 Times in 158 Posts
Originally Posted by Banzai
Up to one 2mm shim won't hurt anything on a road BB.

Their MTB BBs use a series of shims to space, depending on bike setup.

On my Nashbar frame, the triple fits fine without, and the double needed just one so that the right crankarm didn't clip the chainstay whilst pedaling.
If adding shims is not an issue, then why did the OPs crankset arm fall off?

Consider that a standing cyclist might go down hard when a crank arm fails, (and crankarms often fail while standing on the pedals) I don't know why anyone would recommend anything but the factory build recommendations.
__________________
When I ride my bike I feel free and happy and strong. I'm liberated from the usual nonsense of day to day life. Solid, dependable, silent, my bike is my horse, my fighter jet, my island, my friend. Together we will conquer that hill and thereafter the world.
Barrettscv is offline  
Old 06-14-13, 10:12 AM
  #10  
Jet Jockey
 
Banzai's Avatar
 
Join Date: Jul 2005
Location: St. Paul, MN
Posts: 4,941

Bikes: Cannondale CAAD9, Ritchey Breakaway Cross, Nashbar X-frame bike, Bike Friday Haul-a-Day, Surly Pugsley.

Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 382 Post(s)
Liked 29 Times in 25 Posts
Originally Posted by Barrettscv
If adding shims is not an issue, then why did the OPs crankset arm fall off?

Consider that a standing cyclist might go down hard when a crank arm fails, (and crankarms often fail while standing on the pedals) I don't know why anyone would recommend anything but the factory build recommendations.
Probably because he was running - according to him - two shims per side.

I would never recommend that. I was chiming in to say that on my Nashbar X frame (older 135mm spaced no less!) that a road triple clears perfectly with NO shims, and a road double with a single shim. I run the triple now; not because I'm averse to the shim, but because this bike is my primary hauler as well, to include my 5 yr old daughter in her trailer. Yeah, that "granny-gear" gets a workout.
__________________
Good night...and good luck
Banzai is offline  
Old 06-14-13, 10:32 AM
  #11  
Have bike, will travel
 
Barrettscv's Avatar
 
Join Date: Feb 2006
Location: Lake Geneva, WI
Posts: 12,284

Bikes: Ridley Helium SLX, Canyon Endurance SL, De Rosa Professional, Eddy Merckx Corsa Extra, Schwinn Paramount (1 painted, 1 chrome), Peugeot PX10, Serotta Nova X, Simoncini Cyclocross Special, Raleigh Roker, Pedal Force CG2 and CX2

Mentioned: 46 Post(s)
Tagged: 0 Thread(s)
Quoted: 910 Post(s)
Liked 288 Times in 158 Posts
Originally Posted by Banzai
Probably because he was running - according to him - two shims per side.

I would never recommend that. I was chiming in to say that on my Nashbar X frame (older 135mm spaced no less!) that a road triple clears perfectly with NO shims, and a road double with a single shim. I run the triple now; not because I'm averse to the shim, but because this bike is my primary hauler as well, to include my 5 yr old daughter in her trailer. Yeah, that "granny-gear" gets a workout.
Yes, I could see a skilled installer putting a single shim on his own bike with good results. However, a bike shop should not vary from the Factory recommendations with a customer's bike.
__________________
When I ride my bike I feel free and happy and strong. I'm liberated from the usual nonsense of day to day life. Solid, dependable, silent, my bike is my horse, my fighter jet, my island, my friend. Together we will conquer that hill and thereafter the world.

Last edited by Barrettscv; 06-14-13 at 10:44 AM.
Barrettscv is offline  
Old 06-15-13, 04:30 AM
  #12  
cs1
Senior Member
 
cs1's Avatar
 
Join Date: Feb 2004
Location: Clev Oh
Posts: 7,093

Bikes: Specialized, Schwinn

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 225 Post(s)
Liked 26 Times in 24 Posts
If this frame was originally made for a MTB triple, as many suggested, why not use a triple BB?
cs1 is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
angelonc
Commuting
8
05-12-19 10:36 AM
speedevil
Bicycle Mechanics
16
07-22-18 08:19 AM
bonsai171
Singlespeed & Fixed Gear
12
03-10-18 07:08 PM
Randybb
Bicycle Mechanics
7
03-23-17 02:00 PM
bikebreak
Bicycle Mechanics
7
02-12-14 08:44 PM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.