Indicators for cyclists
#26
Senior Member
Hello @Redhatter ! Your bike looks great but imagine this is all custom kit that you have created? How many LEDs are you using and what kind of batteries?
I'm trying to make something that will be portable between bikes - i'll post some pictures of the prototypes
I'm trying to make something that will be portable between bikes - i'll post some pictures of the prototypes
The set-up is custom, as described above. It's not portable between bikes, but isn't difficult to fit or detach from a bike.
- It's an extra piece of equipment to worry about.
- It's going to be problematic with backpacks and unworkable for recumbent cyclists.
Having the device accommodate the permanent-mount and temporary installation would be best.
This is probably going to be the hardest bit. For battery capacity, I wouldn't consider anything much less than 40Wh capacity.
#27
Newbie
Thread Starter
Join Date: Jun 2015
Location: Melbourne
Posts: 4
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Morning!
To answer questions regarding battery life:
The prototype has a single cell Lithium 1000mAh battery in each Lightpod and also in the controller (about half the size of the battery in a smartphone), which gives a battery life of over 5 hours on full bright white and much longer if brightness is dimmed. If set to the other modes at full brightness: flashing white approx 10 hours, solid red approx 10 hours, flashing red approx 20 hours.
The Lightpods and controller are all rechargeable via mini-USB and take about 2 hours to fully charge.
@Redhatter - for a 40Wh battery (3.6v * 11,000mAh) you would be looking at about a 250g battery pack which would equate to 1Kg of battery packs which unfortunately would not be very wearable.
Regarding the system being permanently affixed to your bike, I would be interested in hearing about your experiences in other cities regarding theft, but in Melbourne you basically need to take everything off your bike if you don't want it to be stolen (sometimes they even take seats and wheels!!), so that is why I have gone for a wearable/easily removable design.
To answer questions regarding battery life:
The prototype has a single cell Lithium 1000mAh battery in each Lightpod and also in the controller (about half the size of the battery in a smartphone), which gives a battery life of over 5 hours on full bright white and much longer if brightness is dimmed. If set to the other modes at full brightness: flashing white approx 10 hours, solid red approx 10 hours, flashing red approx 20 hours.
The Lightpods and controller are all rechargeable via mini-USB and take about 2 hours to fully charge.
@Redhatter - for a 40Wh battery (3.6v * 11,000mAh) you would be looking at about a 250g battery pack which would equate to 1Kg of battery packs which unfortunately would not be very wearable.
Regarding the system being permanently affixed to your bike, I would be interested in hearing about your experiences in other cities regarding theft, but in Melbourne you basically need to take everything off your bike if you don't want it to be stolen (sometimes they even take seats and wheels!!), so that is why I have gone for a wearable/easily removable design.
#28
Senior Member
Morning!
@Redhatter - for a 40Wh battery (3.6v * 11,000mAh) you would be looking at about a 250g battery pack which would equate to 1Kg of battery packs which unfortunately would not be very wearable.
@Redhatter - for a 40Wh battery (3.6v * 11,000mAh) you would be looking at about a 250g battery pack which would equate to 1Kg of battery packs which unfortunately would not be very wearable.
Better though, is if it can be charged up and last the week, in which case, a bigger pack is worthwhile.
Regarding the system being permanently affixed to your bike, I would be interested in hearing about your experiences in other cities regarding theft, but in Melbourne you basically need to take everything off your bike if you don't want it to be stolen (sometimes they even take seats and wheels!!), so that is why I have gone for a wearable/easily removable design.
The top box is locked into place, and secured with a bolt through the bottom (tightened with a wingnut on the inside). I normally stow the battery in there as well as my tools and a radio transceiver, so there's about 16kg on the back. All up, the bike weighs about 40kg, you will not move it in a hurry.
#29
Senior Member
Join Date: Mar 2010
Location: Seattle, WA
Posts: 23,208
Mentioned: 89 Post(s)
Tagged: 0 Thread(s)
Quoted: 18883 Post(s)
Liked 10,646 Times
in
6,054 Posts
Garmin's new "smart lights" work as as blinkers (automatically?) when you pair them with an Edge.
Garmin | Edge
Garmin | Edge