|
I am still more than satisfied with two Fenix LD20 (dual AA cell) mounted under bars with twofish blocks for night rides. I usually use one at a time, but can turn both on for more light. I use an L1D (single AA cell) for my commute. Never dropped one.
Interestingly my friends who use proper bike lights have dropped theirs and/or have used duct tape to secure the weak clamps. |
What kind of "safe?"
Originally Posted by Richard Cranium
(Post 20792677)
The purpose of this statement was to demonstrate my opinion of trying to use lighting equipment incorrectly.
My experience suggests that typical flashlights are not good at providing a large enough field of light. I guess using two or more flashlights could provide acceptable performance. After years and years of watching forum threads produce discussions about the benefits and usage of a single bicycle lighting product - I began to describe to readers the necessity of using at least two lighting sources for truly safe night time cycling. As the posts above reveal, everyone has their own ideas and opinions - I hope my post shed a little better light on the OP's original - yet terribly flawed comment. There are good thin five finger insulated gloves and/or wrap your fingers in Saran wrap as added heat retention. You are a diehard bad ass and truly nice guy. Whatever works for you, thanks for sharing. How do you keep your eyes warm? |
anker rechargeable lc40s for 20 bucks and free pipe clamps i found in the basement , the ones with the screw to secure thing , use rubber guards if you dont want to scratch your bars up .
secure one pipe clamp around the bar and slide the one to hold the flashlight under it adjust the angle , and tighten , but not too much, 80 bucks gets you 1600 lumens if you over and under double mount them on both sides of the bars , and you can use 400 to 800 lumens at a time , they are water proof and recharge , the only draw back is they cant recharge and be in use , thats the biggest bummer for really long rides . i cant see a point in a 120 dollar bike light that isnt doing anything special . |
Can't see why someone would think a simple LED torch ( flashlight ) wouldn't work as a bike light. Lot's of choices if you want a decent torch. As a torch collector I suppose I have a good number to choose from so I have an advantage over someone who just picks any old cheap torch and then want's to bee-itch because he bought a POS.
My favorite for the bars is the Convoy S2 I bought from Gearbest. Though it is one of my more inexpensive torches it works great on the bars. The one I have is using a shorter reflector and thus the beam pattern is more spread out ( but not too spread out, still has some decent throw. ) I use mine as back-up when I go MTB'n. The spread with mine is so good that sometimes I think I'm still using my primary bar light ( Gloworm X2, dual emitter lamp ). Not bad for a cheap single XM-L2 emitter torch. Yes, some flashlights do have a very narrow beam not suitable for the bars. For my helmet I like the Convoy M1. Liked it so much I bought two, one neutral white LED ( for MTB ) the other standard bright white for road use. The M1 has some awesome throw and yet still provides some decent spill. ( Mine are custom setups using XP-L HI emitters and five mode U.I. ) On the road I use the M1 for high-beam duties only. Comes in real handy when flying downhill in areas where deer are known to jump out at you. Almost forgot to add that I use some nice torch holders I bought off a Chinese website ( now also sold on ebay ). I like the ones that are all metal and use cam-style clamps to hold everything ( both bars and torch ) nice and tight. Been using those types of holders for years and never ever lost a torch. The ones I have also have a little side to side adjustment so that too is handy if you need to aim a little off center. ( I center the swivel on mine and then tape them to keep them from moving ). |
I'm planning on mounting a 2 C cell maglight to front rack as a back up and nuclear option. There is a version with multible power setting that Im going to buy. The amazon price jumped $20 overnight so I'm waiting to see if it drops again. The maglight beam with hot spot is not great for a bike, but i havent come across a good alternative yet. |
Originally Posted by downhillmaster
(Post 20794051)
Did you even bother to read your own post? I am referring ofc to the post where you wrote: 1. NUMBER ONE REASON - I need to be able to mount and remove the lights while wearing extremely thick mittens. Notice where you typed in all caps? Notice your statement’s place in your order? NUMBER ONE. FYI bro. Unless one of us is an android, this is real life. Also, when someone says something ridiculous to me in person I am quick to point it out. To be clear what is happening here, I summarized eight (8) reasons that no commercially available bicycle headlight meets my needs. The first item on my list was operating the lights with mittens on. Your response was that I use flashlights as headlights "(a)ll because (I) cannot figure out how to use proper lights wearing heavy mittens lol." Do you really think that "1 of 8" is the same as "all"? That's worth LOLing about. I am not the one saying something ridiculous here. |
Originally Posted by Bat56
(Post 20814524)
If you think that when someone presents a list, that the first thing on the list summarizes or stands as a placeholder for the whole list, you do not know how lists work.
To be clear what is happening here, I summarized eight (8) reasons that no commercially available bicycle headlight meets my needs. The first item on my list was operating the lights with mittens on. Your response was that I use flashlights as headlights "(a)ll because (I) cannot figure out how to use proper lights wearing heavy mittens lol." Do you really think that "1 of 8" is the same as "all"? That's worth LOLing about. I am not the one saying something ridiculous here. Riding in rural areas, where lighting is a problem, creativity will overcome the lack of a pat solution. No matter what some schlock like me suggests it will never be good enough. So, have a metal worker or repair shop create something that works. The end result will be years of happiness and something unique. |
I do exactly this with a Led Lenser torch - works really well and I can use it off the bike when I am touring. |
Flash <> Bike, Light
Originally Posted by noisebeam
(Post 20711637)
Yeah, no. I am looking for the minimal, not extra stuff hanging off of bike or other compromises.
http://twofish.biz/images/stories/FlashlightHolder.jpg In my house, I use a bike light for a flashlight.. |
Originally Posted by bark_eater
(Post 20806878)
I'm planning on mounting a 2 C cell maglight to front rack as a back up and nuclear option. There is a version with multible power setting that Im going to buy. The amazon price jumped $20 overnight so I'm waiting to see if it drops again. The maglight beam with hot spot is not great for a bike, but i havent come across a good alternative yet. Not sure what your fascination with Maglight is all about. Maglight is so completely old school. Why mess with anything that uses old school C or D cells when there are just so many other good options. Why not mount a simple Li-ion powered LED torch like me and others have talked about using a simple handlebar holder. Works for me. Heck, if you really want something cheap and simple why not go on Amazon and buy something like one of these. They're cheap, they work and the built in batteries should last a good number of years. No need to keep buying C or D cells, just recharge via USB whenever needed. BTW I own one of these and although I don't currently use it I did test it out and if I didn't own better Iights I would have no problem using something like one of these. |
https://www.jitensha.com/eng/kimura_lights.html [img]webkit-fake-url://ec62a331-6745-4159-920a-4e97f328bfe0/imagejpeg[/img] Verses a $20 maglight as a back up. |
Originally Posted by Bat56
(Post 20814524)
If you think that when someone presents a list, that the first thing on the list summarizes or stands as a placeholder for the whole list, you do not know how lists work.
To be clear what is happening here, I summarized eight (8) reasons that no commercially available bicycle headlight meets my needs. The first item on my list was operating the lights with mittens on. Your response was that I use flashlights as headlights "(a)ll because (I) cannot figure out how to use proper lights wearing heavy mittens lol." Do you really think that "1 of 8" is the same as "all"? That's worth LOLing about. I am not the one saying something ridiculous here. Your lists are in random order but you still choose to make them numerical? Is that so the rest of us know how many items are on your list? How about the ALL CAPS for the FIRST item on your RANDOM list? The ALL CAPS were also not intended to place any extra significance on the number one item on your list? It’s all good bro. You can’t figure out how to operate a proper cycling light while wearing mittens so you Mcgyver up some flashlights. Cool stuff. Peace out. |
Originally Posted by KraneXL
(Post 20690115)
Sure you could use a flashlight on bicycles. After all, you could hang a lantern from your handlebars, if you wanted to.
Personally, I'd consider them something to be used on an ah hoc basis due to their design limitations. But as long as I can see you coming that's up to you. The weak will need to seek advice from whomever can provide it and the more adept will acquire or fashion it themselves with the skill level required. This goes for any other nonstandard adaptation. Just get it done any way you can thru knowledge and skill or trial and error. When you get done with this forum, get a pencil and paper and design your own lighting system with a list of parameters. |
Originally Posted by lkoyanagi
(Post 20832243)
As long as aiming and flood light is no consideration any flashlight will do and any mounting method will do. However, If aiming, type and output of light are somewhat important considerations, one must take appropriate steps to handle them.
The weak will need to seek advice from whomever can provide it and the more adept will acquire or fashion it themselves with the skill level required. This goes for any other nonstandard adaptation. Just get it done any way you can thru knowledge and skill or trial and error. When you get done with this forum, get a pencil and paper and design your own lighting system with a list of parameters. Sorry, I grew up in adverse conditions doing hard labor. |
Originally Posted by downhillmaster
(Post 20831148)
....It’s all good bro. You can’t figure out how to operate a proper cycling light while wearing mittens so you Mcgyver up some flashlights. Cool stuff. Peace out. Let's be honest; Trying to turn on / off almost any light or torch while wearing heavy mittens or gloves is not going to be easy. Personally I can't fathom wearing mittens while riding a multi-geared bike. Without articulated fingers available it's going to be real hard ( if not impossible ) to change gears. Working a light would be the least of my worries as ( what was said by others ) I could always remove a glove to turn the lamp on or off. Changing modes not going to be easy but since I have a lamp that has a single button remote switch I can make due. For me the hardest part of riding in cold weather has to do with not being able to easily access my phone's touch screen if I'm wearing double gloves. If it's not too cold I wear a single pair of full finger gloves with a small section cut out on one finger so I can still operate my phone's touch screen.....Getting back to the original argument, I really don't see the point in having the ability to operate a bike light vs. a torch ( wearing heavy mittens ) as in my opinion a bike light would be easier to operate as long as you chose the right light. Then again I own a Wiz-1 which while sold as a bike light happens to be very torch-like. The mode button on the Wiz-1 is pronounced enough that wearing heavy gloves should not be a problem. |
Originally Posted by 01 CAt Man Do
(Post 20834571)
For me the hardest part of riding in cold weather has to do with not being able to easily access my phone's touch screen if I'm wearing double gloves. .
|
Originally Posted by uraniumman
(Post 21863861)
I personally don't see that many cons to it. I mean it's just better illumination after all. I've been using a flashlight for a long time, personally.
|
Still a strong proponent of flashlight (a good one) after 15yr of very regular use.
|
i actually do the opposite. use my bike light for biking of course, but it's really handy for camping, etc. i'm in the camp of getting the purpose built bike light and using it for other things
|
Originally Posted by redmandarin
(Post 21868211)
i actually do the opposite. use my bike light for biking of course, but it's really handy for camping, etc. i'm in the camp of getting the purpose built bike light and using it for other things
|
I always use a headlight on my helmet when I trail ride at night, but I had this flashlight so I mounted it with an old bike tube. Very easy and it sheds some light. No worries of blinding anyone where I go. Good riding.https://cimg9.ibsrv.net/gimg/bikefor...2a89b66368.jpg
https://cimg0.ibsrv.net/gimg/bikefor...c62aa3a5e5.jpg https://cimg2.ibsrv.net/gimg/bikefor...999c4748a2.jpg |
I have purchased some very cheap handlebar lights (USB charged, LED) on amazon that work great at night. Very small, no mounting issues at all.
|
| All times are GMT -6. The time now is 11:22 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.