|
Originally Posted by Grun
(Post 5305920)
Here ya go: Here is my variation:
I used a Shark mount ($1.50) and a Planetbike QuickCam Mount ($3.50): My girlfriend is a smart cookie, she made her mount in about a minute: (two zip ties) http://i6.tinypic.com/66otvl4.jpg My mount took about 10 minutes: (9 minutes thinking/experimenting, 1 minute execution: http://i9.tinypic.com/4pz1848.jpg http://i3.tinypic.com/3ywxp38.jpg The two Compared: http://i6.tinypic.com/5z2u1r7.jpg Needless to say, a close-up pic would be greatly appreciated. Thanks |
Originally Posted by diesel_dad
(Post 5310415)
Great idea. How did you join them together? Where did the screw go? Did you have to drill any holes?
Needless to say, a close-up pic would be greatly appreciated. Thanks Tools: Screwdriver Screw Get the two Planetbike Quickcam mounts from Mec. Unscrew the plates/shoes off em. Make the plates kiss, then turn one 90°, but still are kissing. http://i14.tinypic.com/4tut547.jpg Screw them together with this: (no drilling needed) http://faq.f650.com/FAQs/Photos/Chai...GuardScrew.jpg Put the plates back on. http://i2.tinypic.com/4m8l0yu.jpg |
Notice how there is a screw that you can undo? That allows you to remove the plate. Then you can screw it back on.
There are three screws altogether, one that has a sharp end which you either have laying around in your tool box, or you can get for $0.03 at the hardware store, and one from each of the Planetbike-MEC QCam Clamps. |
For the ziptie method:
Take off the plates. Then put em' together, and zip tie em'. |
| All times are GMT -6. The time now is 02:51 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.