LED vs Halogen
#1
Cries on hills
Thread Starter
Join Date: Jun 2007
Location: Central NH
Posts: 1,088
Bikes: 2007 Trek Pilot 1.2, 1969 Raleigh Sprite 5
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 83 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
LED vs Halogen
Last summer I took a Home Depot 20W exterior spotlight and used it with a 7Ahr SLA. Good amount of light, even with a 20W halogen with no reflector on the bulb (the housing does have something of a reflector in it). My question is, would a couple of the newer LED lights, be it flashlight or similar, come close to the same light output? I have a hard time believing that something running on a couple of AA's, even if NiMH, is going to come close in light output.
I don't do much riding in the dark, but I'd like to have the option--but I'm loath to spend $$$ to do so. At the same time, I've got a new bike, and would have to figure out how to mount up this light. If I did, I'd be tempted to buy a cheapie LED light for the bracket, and run the battery in a handlebar bag; but OTOH I'm not sure I want that extra weight on the handlebar (it's a heavy battery).
If I could get some new LED lights that ran on rechargables (preferably AA, those will work in my camera too) and gave me an hour or so of run time for $50 or so, that'd be great. I also would prefer to use half-way decent mounts, as I would want the lights to be easy to remove for when I don't need them, or when I'm transporting the bike, etc. My night-time rides are quick 45minute or so rides for stress relief and excersise, not commuting, on lightly traveled and mostly-unlit roads.
I don't do much riding in the dark, but I'd like to have the option--but I'm loath to spend $$$ to do so. At the same time, I've got a new bike, and would have to figure out how to mount up this light. If I did, I'd be tempted to buy a cheapie LED light for the bracket, and run the battery in a handlebar bag; but OTOH I'm not sure I want that extra weight on the handlebar (it's a heavy battery).
If I could get some new LED lights that ran on rechargables (preferably AA, those will work in my camera too) and gave me an hour or so of run time for $50 or so, that'd be great. I also would prefer to use half-way decent mounts, as I would want the lights to be easy to remove for when I don't need them, or when I'm transporting the bike, etc. My night-time rides are quick 45minute or so rides for stress relief and excersise, not commuting, on lightly traveled and mostly-unlit roads.
#2
Mad bike riding scientist
Join Date: Nov 2004
Location: Denver, CO
Posts: 27,359
Bikes: Some silver ones, a red one, a black and orange one, and a few titanium ones
Mentioned: 152 Post(s)
Tagged: 1 Thread(s)
Quoted: 6218 Post(s)
Liked 4,215 Times
in
2,362 Posts
Last summer I took a Home Depot 20W exterior spotlight and used it with a 7Ahr SLA. Good amount of light, even with a 20W halogen with no reflector on the bulb (the housing does have something of a reflector in it). My question is, would a couple of the newer LED lights, be it flashlight or similar, come close to the same light output? I have a hard time believing that something running on a couple of AA's, even if NiMH, is going to come close in light output.
I don't do much riding in the dark, but I'd like to have the option--but I'm loath to spend $$$ to do so. At the same time, I've got a new bike, and would have to figure out how to mount up this light. If I did, I'd be tempted to buy a cheapie LED light for the bracket, and run the battery in a handlebar bag; but OTOH I'm not sure I want that extra weight on the handlebar (it's a heavy battery).
If I could get some new LED lights that ran on rechargables (preferably AA, those will work in my camera too) and gave me an hour or so of run time for $50 or so, that'd be great. I also would prefer to use half-way decent mounts, as I would want the lights to be easy to remove for when I don't need them, or when I'm transporting the bike, etc. My night-time rides are quick 45minute or so rides for stress relief and excersise, not commuting, on lightly traveled and mostly-unlit roads.
I don't do much riding in the dark, but I'd like to have the option--but I'm loath to spend $$$ to do so. At the same time, I've got a new bike, and would have to figure out how to mount up this light. If I did, I'd be tempted to buy a cheapie LED light for the bracket, and run the battery in a handlebar bag; but OTOH I'm not sure I want that extra weight on the handlebar (it's a heavy battery).
If I could get some new LED lights that ran on rechargables (preferably AA, those will work in my camera too) and gave me an hour or so of run time for $50 or so, that'd be great. I also would prefer to use half-way decent mounts, as I would want the lights to be easy to remove for when I don't need them, or when I'm transporting the bike, etc. My night-time rides are quick 45minute or so rides for stress relief and excersise, not commuting, on lightly traveled and mostly-unlit roads.
The real magic of halogen is the ability to sacrifice bulb life for light output. You can overdrive the halogen and boast the amount of light to incredible levels. Yes, the bulb lasts only 10% of a bulb run at nominal voltage. But for most halogens the life is going to be 5000 hrs at rated voltage and 500 hours at 20% overvolted. That still a long time. The bulb will eventually have to be replaced but the bulb is usually not the most costly part of a light system. For a the 20W bulb above, you can double the output for one more cell in your battery system. At 12V your system is pretty good in terms of light output and run time. Go to 14.4V and you'll be astounded.
LEDs do put out pretty good light for their weight. I just swapped over to my LEDs for the rest of the season (about 3 weeks for commuting) that I need lights. But, using the Fenix P1 for example, I'm not convinced that their light output is that good. The P1 puts out 180 lm for 1 hr. To get the same output as your light at 12V, you'd need 6 of them (they aren't that cheap). To get the light output at 14.4V, you'd need 9 of them (They really aren't that cheap!) I don't have that much bar space...even with a wide light bar I don't mind carrying batteries and would rather have the light output.
__________________
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!
#4
Cries on hills
Thread Starter
Join Date: Jun 2007
Location: Central NH
Posts: 1,088
Bikes: 2007 Trek Pilot 1.2, 1969 Raleigh Sprite 5
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 83 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
At the rated voltage of a halogen light, assuming an 20W MR16 bulb, the output is going greater than most LEDs. The halogen puts out 800 lumen while a commercial LED system like the MiNewt or TriNewt put out 190 lm and 450 lm, respectively. There might be better lamps out there now but those are typical. The TriNewt, as do many lamps, get the lumen count up by adding the output from several individual LEDs. While this is valid...the amount of light is the same...it's sneaky because the quality of the light isn't the same. Think of it as the difference between a search light and a equivalent number of car lights. A search light is going to penetrate further into the dark then the car lights will.
The real magic of halogen is the ability to sacrifice bulb life for light output. You can overdrive the halogen and boast the amount of light to incredible levels. Yes, the bulb lasts only 10% of a bulb run at nominal voltage. But for most halogens the life is going to be 5000 hrs at rated voltage and 500 hours at 20% overvolted. That still a long time. The bulb will eventually have to be replaced but the bulb is usually not the most costly part of a light system. For a the 20W bulb above, you can double the output for one more cell in your battery system. At 12V your system is pretty good in terms of light output and run time. Go to 14.4V and you'll be astounded.
LEDs do put out pretty good light for their weight. I just swapped over to my LEDs for the rest of the season (about 3 weeks for commuting) that I need lights. But, using the Fenix P1 for example, I'm not convinced that their light output is that good. The P1 puts out 180 lm for 1 hr. To get the same output as your light at 12V, you'd need 6 of them (they aren't that cheap). To get the light output at 14.4V, you'd need 9 of them (They really aren't that cheap!) I don't have that much bar space...even with a wide light bar I don't mind carrying batteries and would rather have the light output.
The real magic of halogen is the ability to sacrifice bulb life for light output. You can overdrive the halogen and boast the amount of light to incredible levels. Yes, the bulb lasts only 10% of a bulb run at nominal voltage. But for most halogens the life is going to be 5000 hrs at rated voltage and 500 hours at 20% overvolted. That still a long time. The bulb will eventually have to be replaced but the bulb is usually not the most costly part of a light system. For a the 20W bulb above, you can double the output for one more cell in your battery system. At 12V your system is pretty good in terms of light output and run time. Go to 14.4V and you'll be astounded.
LEDs do put out pretty good light for their weight. I just swapped over to my LEDs for the rest of the season (about 3 weeks for commuting) that I need lights. But, using the Fenix P1 for example, I'm not convinced that their light output is that good. The P1 puts out 180 lm for 1 hr. To get the same output as your light at 12V, you'd need 6 of them (they aren't that cheap). To get the light output at 14.4V, you'd need 9 of them (They really aren't that cheap!) I don't have that much bar space...even with a wide light bar I don't mind carrying batteries and would rather have the light output.
#5
Mad bike riding scientist
Join Date: Nov 2004
Location: Denver, CO
Posts: 27,359
Bikes: Some silver ones, a red one, a black and orange one, and a few titanium ones
Mentioned: 152 Post(s)
Tagged: 1 Thread(s)
Quoted: 6218 Post(s)
Liked 4,215 Times
in
2,362 Posts
A 4.5 Ahr NiMH battery will give you about 2 hours with a 20W bulb. Look at my post for how I do the batteries.
__________________
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!
#6
Mad bike riding scientist
Join Date: Nov 2004
Location: Denver, CO
Posts: 27,359
Bikes: Some silver ones, a red one, a black and orange one, and a few titanium ones
Mentioned: 152 Post(s)
Tagged: 1 Thread(s)
Quoted: 6218 Post(s)
Liked 4,215 Times
in
2,362 Posts
The LEDs look promising but they still have a ways to go. A $3 20W 12 MR-16 puts out twice as much light. Juice it up and it'll put out nearly 4 times as much light. The LED may beat halogen in weight and run time but a halogen will out do just about anything else that is small enough to put on a bicycle
__________________
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!
#8
Señor Member
The LEDs look promising but they still have a ways to go. A $3 20W 12 MR-16 puts out twice as much light. Juice it up and it'll put out nearly 4 times as much light. The LED may beat halogen in weight and run time but a halogen will out do just about anything else that is small enough to put on a bicycle
#9
Señor Member
https://www.dealextreme.com/details.dx/sku.11809
but from the picture you can see that they just have just made 4 emitters in one package. The beam pattern isn't going to be as good with this, in other words.
The lumens/watt ratings for these are ~ 80 which isn't bad, but it also isn't a real advance either. They are just packaging 4 of their older LEDs into one package to get the brightness up.
I think the point of this package is to go after the 60 and 100 watt light bulb market.
https://www.led-professional.com/content/view/930/29/
#10
Scott
Join Date: Jun 2006
Posts: 2,393
Bikes: Too Many
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
They are already out:
https://www.dealextreme.com/details.dx/sku.11809
but from the picture you can see that they just have just made 4 emitters in one package. The beam pattern isn't going to be as good with this, in other words.
The lumens/watt ratings for these are ~ 80 which isn't bad, but it also isn't a real advance either. They are just packaging 4 of their older LEDs into one package to get the brightness up.
I think the point of this package is to go after the 60 and 100 watt light bulb market.
https://www.led-professional.com/content/view/930/29/
https://www.dealextreme.com/details.dx/sku.11809
but from the picture you can see that they just have just made 4 emitters in one package. The beam pattern isn't going to be as good with this, in other words.
The lumens/watt ratings for these are ~ 80 which isn't bad, but it also isn't a real advance either. They are just packaging 4 of their older LEDs into one package to get the brightness up.
I think the point of this package is to go after the 60 and 100 watt light bulb market.
https://www.led-professional.com/content/view/930/29/
In this photo you can see the how different the lenses are.
I've built and ran an MR-16 20 watt light with a 12 volt-7 amp hour jell cell battery and the above light provides more usable light powered with a bottle type dynamo for unlimited runtime, which is perfect for my touring bike. Here is the link where you can find many circuits for powering high power LED's from a dynamo.
https://www.pilom.com/BicycleElectron...moCircuits.htm
After building this light I'll never go back to batteries!
#11
Mad bike riding scientist
Join Date: Nov 2004
Location: Denver, CO
Posts: 27,359
Bikes: Some silver ones, a red one, a black and orange one, and a few titanium ones
Mentioned: 152 Post(s)
Tagged: 1 Thread(s)
Quoted: 6218 Post(s)
Liked 4,215 Times
in
2,362 Posts
That's why I always carry multiple lights. Even if I use LED I have more then one. However, with the halogens I've used for the past 15 years, I've only ever blown out one lamp. I know it can happen at any point but, for me at least, it's a very rare event
__________________
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!
#12
Zoom zoom zoom zoom bonk
Join Date: Sep 2006
Location: New Zealand
Posts: 4,624
Bikes: Giant Defy, Trek 1.7c, BMC GF02, Fuji Tahoe, Scott Sub 35, Kona Rove, Trek Verve+2
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 551 Post(s)
Liked 722 Times
in
366 Posts
Last summer I took a Home Depot 20W exterior spotlight and used it with a 7Ahr SLA. Good amount of light, even with a 20W halogen with no reflector on the bulb (the housing does have something of a reflector in it). My question is, would a couple of the newer LED lights, be it flashlight or similar, come close to the same light output? I have a hard time believing that something running on a couple of AA's, even if NiMH, is going to come close in light output.
...
My night-time rides are quick 45minute or so rides for stress relief and excersise, not commuting, on lightly traveled and mostly-unlit roads.
...
My night-time rides are quick 45minute or so rides for stress relief and excersise, not commuting, on lightly traveled and mostly-unlit roads.
Overvolted halogens are great on paper, In practice as your battery discharges it doesn't maintain the voltage needed to produce the equivalent LED efficiency and those big lumen numbers.
#13
Mad bike riding scientist
Join Date: Nov 2004
Location: Denver, CO
Posts: 27,359
Bikes: Some silver ones, a red one, a black and orange one, and a few titanium ones
Mentioned: 152 Post(s)
Tagged: 1 Thread(s)
Quoted: 6218 Post(s)
Liked 4,215 Times
in
2,362 Posts
20w halogens put out a decent amount of light. You will need 2-3 led "flashlights" to match this. Two would be a good compromise. A 7Ahr battery is a big thing to lug around so you might find the reduced output ok given the increased convenience. I could never find a good way to carry a SLA, but a half a dozen AAs is easy to strap to the frame. You are probably looking at 500lm from the light you have. My last three LED light have been around this and its plenty.
Overvolted halogens are great on paper, In practice as your battery discharges it doesn't maintain the voltage needed to produce the equivalent LED efficiency and those big lumen numbers.
Overvolted halogens are great on paper, In practice as your battery discharges it doesn't maintain the voltage needed to produce the equivalent LED efficiency and those big lumen numbers.
__________________
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!
#14
Reeks of aged cotton duck
Join Date: Oct 2007
Location: Middle Georgia, USA
Posts: 1,176
Bikes: 2008 Kogswell PR mkII, 1976 Raleigh Professional, 1996 Serotta Atlanta, 1984 Trek 520, 1979 Raleigh Comp GS
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 5 Times
in
4 Posts
I'm running twin 20W halogens @ 14.4V and I've never had my lights go noticeably dim on me until they are just about ready to discharge fully. They may be getting dimmer as I ride, but I can't see the difference... so I don't care. I'm using a 5Ah NiMH battery, and I get about 1.5 hours of runtime when I'm at full flamethrower mode.
The one thing that I did for my lighting system is installed a Lightbrain controller. It has more slick and useful features than you can shake a stick at... the best $38 I've spent in a long time.
#15
Senior Member
Join Date: Jun 2005
Location: Dallas Suburbpopolis
Posts: 1,502
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 9 Post(s)
Likes: 0
Liked 9 Times
in
5 Posts
I did the overvolted halogen thing for a couple years and finally gave up in disgust and am currently running 2 Fenix lights.
Here's the plus & minus of each in my book:
Halogen:
+ can be cheap, bright, efficient, color temperature (i like the halogen yellow-white light)
- expensive if made reasonably light (li-ion batteries are $$$), multiple connectors = many failure points, never entirely waterproof, poor experience with overvolting (blew bulbs at least every 100hrs at 20% overvolted). Off the shelf solutions are pricey.
Summary: cheap, bright, lightweight: choose 2. And you still won't have 100% reliability.
LED:
+ lightweight, reliable, can take standard AA or cr123a batteries. More lumens/$$ than commercial halogen systems.
- less lumens/$$ verses homebrew halogen, LED color temp (more blue than I'd prefer, washes out some detail).
Summary: after using both, I'm sticking with my dual Fenix flashlight setup. just over $100, over 400 lumens on hi (p3d's rule!), super flexible, use & abuse the heII out of em and they just don't care. No mainteance, set & forget the lights, just charge the batteries. oh yeah, and they make awesome flashlights
fwiw.... I've converted a few users to Fenix as well. One dude was using HID, took a tumble and blew the bulb. Got 2 Fenix and has never been happier.
Cheers
Here's the plus & minus of each in my book:
Halogen:
+ can be cheap, bright, efficient, color temperature (i like the halogen yellow-white light)
- expensive if made reasonably light (li-ion batteries are $$$), multiple connectors = many failure points, never entirely waterproof, poor experience with overvolting (blew bulbs at least every 100hrs at 20% overvolted). Off the shelf solutions are pricey.
Summary: cheap, bright, lightweight: choose 2. And you still won't have 100% reliability.
LED:
+ lightweight, reliable, can take standard AA or cr123a batteries. More lumens/$$ than commercial halogen systems.
- less lumens/$$ verses homebrew halogen, LED color temp (more blue than I'd prefer, washes out some detail).
Summary: after using both, I'm sticking with my dual Fenix flashlight setup. just over $100, over 400 lumens on hi (p3d's rule!), super flexible, use & abuse the heII out of em and they just don't care. No mainteance, set & forget the lights, just charge the batteries. oh yeah, and they make awesome flashlights
fwiw.... I've converted a few users to Fenix as well. One dude was using HID, took a tumble and blew the bulb. Got 2 Fenix and has never been happier.
Cheers
#16
kipuka explorer
Join Date: Apr 2004
Location: Hilo Town, East Hawai'i
Posts: 3,297
Bikes: 1994 Trek 820, 2004 Fuji Absolute, 2005 Jamis Nova, 1977 Schwinn Scrambler 36/36
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
A few years ago when I did the calculations the break-even point between LED and halogen was about 8 Watts. That is, you got more light from LEDs under 8 Watts, and more light from Halogen over 8 Watts. So you have to choose how long you want your batteries to last (Watts vs time), and how much light you need, and pick which side of that fence you fall on. For instance my tail light is a 1 Watt luxeon, and runs on a pair of AA NIMH batteries for about 3-5 weeks between charges. The headlight I was building had 4 1 Watt luxeons, and would have used something like a 6 or 8 AA NIMH pack. However, my 1 Watt cateye luxeon headlight was fine for my needs so I never finished the homebrew headlight yet.
__________________
--
-=- '05 Jamis Nova -=- '04 Fuji Absolute -=- '94 Trek 820 -=- '77 Schwinn Scrambler 36/36 -=-
Friends don't let friends use brifters.
--
-=- '05 Jamis Nova -=- '04 Fuji Absolute -=- '94 Trek 820 -=- '77 Schwinn Scrambler 36/36 -=-
Friends don't let friends use brifters.