Bulbs for Generator Lights
#2
Scott
Join Date: Jun 2006
Posts: 2,393
Bikes: Too Many
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
Are you sure it uses 2 amp bulbs? Most dynamo or generator lights use a 6V 2.4 watt bulb with a .6 watt taillight or a 6 volt 3 watt bulb without a taillight connected.
A well stocked bike shop will have them or visit a few large online bike shops that stock them.
A well stocked bike shop will have them or visit a few large online bike shops that stock them.
#3
genec
Join Date: Sep 2004
Location: West Coast
Posts: 27,079
Bikes: custom built, sannino, beachbike, giant trance x2
Mentioned: 86 Post(s)
Tagged: 0 Thread(s)
Quoted: 13658 Post(s)
Liked 4,532 Times
in
3,158 Posts
Anybody hook up an LED light to a generator?
#5
Senior Member
Join Date: Feb 2008
Posts: 197
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Not yet, but you would need a full wave rectifier and a capacitor to turn the ac output of the generator to steady DC that the LED could use. You would also need a current limiting resistor for the LED. Depending on the voltage output, you may also need a voltage regulator.
This circuit looks interesting, but may be too complicated for some to tackle themselves:
https://www.elecfree.com/electronic/r...ynamo-bicycle/
But it handles recharging NiMH batteries and the LED light and looks like it would be just perfect.
Here is another design:
https://www.gobike.org/feat_lights.php
This circuit looks interesting, but may be too complicated for some to tackle themselves:
https://www.elecfree.com/electronic/r...ynamo-bicycle/
But it handles recharging NiMH batteries and the LED light and looks like it would be just perfect.
Here is another design:
https://www.gobike.org/feat_lights.php
#6
Scott
Join Date: Jun 2006
Posts: 2,393
Bikes: Too Many
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
Dynamo-Powered LED Light Circuits for Bicycles.
https://www.pilom.com/BicycleElectron...moCircuits.htm
My circuit and the description. https://www.bikeforums.net/electronics-lighting-gadgets/390107-my-new-led-headlight-usb-dynamo-circuit.html
https://www.pilom.com/BicycleElectron...moCircuits.htm
My circuit and the description. https://www.bikeforums.net/electronics-lighting-gadgets/390107-my-new-led-headlight-usb-dynamo-circuit.html
#7
Senior Member
Join Date: Nov 2005
Location: Knoxville, TN
Posts: 505
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I assume you mean the common 6V 3W halogens that are common for generator systems that are not powering a taillight. An expensive solution would be to order direct from the UK at reflectalite.
Depending on whether your generator's output is DC or not, you can go with various LED conversions as well. I'm not that familiar with generator systems. Do they tend to be DC, or AC? Also, are they constant voltage, or constant current (what happens when you go too fast?)
FWIW, I have two 6V 2.4W halogen bulbs I'd gladly sell for $5 a piece, $8 for both.
Depending on whether your generator's output is DC or not, you can go with various LED conversions as well. I'm not that familiar with generator systems. Do they tend to be DC, or AC? Also, are they constant voltage, or constant current (what happens when you go too fast?)
FWIW, I have two 6V 2.4W halogen bulbs I'd gladly sell for $5 a piece, $8 for both.
#8
Scott
Join Date: Jun 2006
Posts: 2,393
Bikes: Too Many
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
The German government in the 1950's set the requirement that all bicycle dynamo lighting systems be 6-volts AC 3-watts. Everyone followed this standard with with few exceptions. It's still with us today. A bicycle dynamo is an exceptionally simple device consisting of a rotating magnet and 4 or 8 poles made of layers of thin steel with a coil of fine gage magnet wire. Hub dynamos typically have 28 coils and 28 magnets. There are no brushes so there extremely reliable. All tire driven dynamos are sealed and not serviceable. There's nothing in them that you can repair anyway considering how little they cost to replace. Dynamos appear to be constant current devices in that current is limited by design to about 500mA. Voltage varies with speed. Quality dynamo systems include Zener diodes to prevent high voltage when the bicycle is traveling at high speeds from burning out the filament in old style bulbs. Modern LED lights do not need high voltage protection. New high power LED's from Cree and SSC can sink 1,000mA or about twice the maximum current a standard dynamo can produce. Until about a year ago dynamo lighting systems utilizing standard or halogen bulbs were considered inferior to battery powered systems. This is no longer true. A Cree or SSC LED used with good optics can produce as much or more light than battery powered systems costing hundreds of dollars.
Last edited by n4zou; 03-22-08 at 07:35 AM.