Taillight Mounting - "Fred"-style
1 Attachment(s)
I bought a taillight and strobe that had only seatpost mounts. However, I wanted to mount them on the back of a rear rack (the racktrunk bag hides the seatpost). Thought I'd share my solution FWIW.
Slice off most of an approx-seatpost-size PVC elbow to leave a tab. Bandsaw or hacksaw, then sanding. In my case, my ancient rack has a horizontal flat area at the back. Drill holes and bolt it where desired. A "vertical" tab can be made using a straight piece of PVC. The tab is pretty sturdy BTW. |
Have you got a pic of it mounted on your rack with your bag in place?
|
Here is a photo of my PVC pipe blinkie mount.
http://i143.photobucket.com/albums/r...u/Hpim0354.jpg 1 1/4-20 bolt 1 1/4-20 nut 2 1/4 fender washers 1/2" PVC plumbing pipe about 1" long. I cut the pipe with an angle so the blinkie would be just below anything strapped to the top of the rack that would extend over the blinkie. |
1 Attachment(s)
I haven't decided on fastener size/type yet, but here's one zip-tied in place. Sorry, it's out of focus, but you get the idea. Of course one could attach multiples of these on an aluminum bar or angle or a 2x4 or whatever....
|
|
Here my Fred mount. A stock DiNotte seatpost mount with a 5mm hole drilled through it. A 30mm long 5mm hex head bolt with a wing nut and rubber backed washer hold it onto the stock plastic Topeak BeamRack mount. Below all of that is a Superflash that attaches to a PB Cascadia fender.
http://i167.photobucket.com/albums/u...s/DiNotte1.jpg http://i167.photobucket.com/albums/u...s/DiNotte2.jpg http://i167.photobucket.com/albums/u...uperFlash1.jpg |
OK, I have a problem with something. Who decides what is Fred and what is not. Show me the dictionary, or the fellow in the dark corner passing judgment. I don't see Fred here, I see innovation. In fact I have posted pics of some of my ideas. I am not a Fred, in fact, I am the coolest person I know.
You are only a Fred if you let yourself be one. |
All times are GMT -6. The time now is 03:08 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.