Anyone here still on a more race-type bike?
#76
Senior Member
#77
Junior Member
Thread Starter
Join Date: Jul 2017
Posts: 187
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 119 Post(s)
Liked 23 Times
in
18 Posts
I ended up getting a used CF Domane, because I wasn't ready to commit funds until I figured out what I want. I immediately flipped the stem down and dropped some spacers, and outside I'm riding it more in the drops. One thing, though - while my back and hips are flexible enough, I've hit the limit of bringing my head up to see the road. So, I'm somewhere between a racing bike and an endurance bike. I think I'm going to look for a slightly more aggressive geometry with fatter tires (maybe up to 32) than what this 2019 domane will take.
Likes For WT21:
#78
Senior Member
I ended up getting a used CF Domane, because I wasn't ready to commit funds until I figured out what I want. I immediately flipped the stem down and dropped some spacers, and outside I'm riding it more in the drops. One thing, though - while my back and hips are flexible enough, I've hit the limit of bringing my head up to see the road. So, I'm somewhere between a racing bike and an endurance bike. I think I'm going to look for a slightly more aggressive geometry with fatter tires (maybe up to 32) than what this 2019 domane will take.
I'm also looking at "softening" my 1980-ish Mondonico which has another few mm of fork and chainstay clearance, and it should accept tires up to 29 or 30, on a tubular rim. To start with I can go with Challenge P-R 27 mm cotton tubulars, while I look for a nice fat pair of 30 mm. After that I'll again fine-tune the saddle and see where things stand. The bars will be narrowed from 42 mm Nitto 110 mm reach, to 40 mm wide 3T compacts with 80 mm reach. Those small steps should together help this bike help me on less travelled roadways.
For both bikes I'll keep the Campy 50/34 chainrings and 12/30 10s cassettes controlled by Ergopowers, as well as drop bars and the relative positions of the bar/pedal contact points and the saddle locations.
So I'm older and I want a bit more comfort, but I also need my gear range, ease of shifting, clean braking, and saddle degree of comfort. I'm riding and fine tuning to become again set up for longer rides. 15 miles last Monday, and perhaps again this Saturday. My cross-training has been gardening, hauling crap around, and 90 minutes Iyengar yoga per week. Hill climbing HR up to 132 bpm last Monday!
For me the Endurance bike will be, like for Iride, a bike that enables me to go my distance with comfort, however long that distance, with appropriate training and tuning, turns out to be. If I crunch another Mondonico frame, maybe I'll make good my old (I intended this about 20 years ago!) threat to buy a Specialized Roubaix - it still seems to have the right spirit for this kind of riding!
Last edited by Road Fan; 05-25-23 at 07:21 PM.
#79
Senior Member
No doubt, more chain rollers flexing at the same time is more lossy than with a shorter chain. Bur the same length and overall vehicle aero treatment reduces losses due to aero factors, mainly reduced frontal area. I would bet that the low profile design saves a lot more power than is lost in the extra-long chain.
#80
Senior Member
Join Date: Apr 2021
Posts: 4,083
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 2332 Post(s)
Liked 2,090 Times
in
1,309 Posts
#81
Senior Member
I have an M5CHR too. I don't ride the NoCom much anymore, not because I dislike it. I love it. But it's always been just a tad too long for me and my older body is becoming intolerant of the position required to reach the pedals. I keep thinking I need to cut the boom and rebuild it an inch shorter; but that's such a big job! Besides, the M5 is essentially just as fast (barely slower on flat ground, but faster in climbs.)
#82
Senior Member
Likes For Road Fan:
#83
Senior Member
I ended up getting a used CF Domane, because I wasn't ready to commit funds until I figured out what I want. I immediately flipped the stem down and dropped some spacers, and outside I'm riding it more in the drops. One thing, though - while my back and hips are flexible enough, I've hit the limit of bringing my head up to see the road. So, I'm somewhere between a racing bike and an endurance bike. I think I'm going to look for a slightly more aggressive geometry with fatter tires (maybe up to 32) than what this 2019 domane will take.
#84
Full Member
I ride a Madone, a Torelli, a Mondonico, and a Bianchi regularly. (Well, the Mondonico is not quite ready yet). I suppose they are race geometry bikes. I also ride a Domane which I like. The Domane does have wider tires but I kind of like the 23s on the steel bikes.
Mike
Mike
#85
Senior Member
I ride a Madone, a Torelli, a Mondonico, and a Bianchi regularly. (Well, the Mondonico is not quite ready yet). I suppose they are race geometry bikes. I also ride a Domane which I like. The Domane does have wider tires but I kind of like the 23s on the steel bikes.
Mike
Mike
Likes For Road Fan:
#86
Standard Member
Join Date: Apr 2009
Location: Brunswick, Maine
Posts: 4,090
Bikes: 1948 P. Barnard & Son, 1962 Rudge Sports, 1963 Freddie Grubb Routier, 1980 Manufrance Hirondelle, 1983 F. Moser Sprint, 1989 Raleigh Technium Pre, 2001 Raleigh M80
Mentioned: 24 Post(s)
Tagged: 0 Thread(s)
Quoted: 1226 Post(s)
Liked 806 Times
in
420 Posts
I'm 65 and this will be my top dog until I abide in my heavenly home: Bought April 1990:

__________________
Likes For 1989Pre:
Likes For EJM73:
#88
The Wheezing Geezer
Join Date: Oct 2021
Location: Espaņola, NM
Posts: 843
Bikes: 1976 Fredo Speciale, Jamis Citizen 1, Ellis-Briggs FAVORI, Rivendell Clem Smith Jr.
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 331 Post(s)
Liked 715 Times
in
345 Posts
I turned 65 this year and am again riding my old racing bike, which turned 47. It has been slightly modernized, and substantially geezerized, and gets about a third of my mileage these days.

I guess you could say I'm still on a more-or-less race type bike...

I guess you could say I'm still on a more-or-less race type bike...
Likes For Fredo76: