problems with numbing fingers
#1
Senior Member
Thread Starter
Join Date: Jul 2006
Location: SoCal
Posts: 756
Bikes: custom built roadie
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
problems with numbing fingers
Hey everyone,
My dad (53) has been riding his bike for the past 3-4 months now and was complaining to me about numbing fingers that would make it impossible to ride any longer than 4-5 miles. At the time he was on a mtn bike so I told him a properly fitted road bike would fix that problem because it certainly helped me when I was in his position. Plus road bikes are awesome =). But anyway, so I just built up a road bike for him and he once again has these tingling numbing issues in his hands. He and my mom have been remodeling the house now that I moved out, and he does alot of the work himself. I was wondering if maybe this was putting too much stress on his hands, making riding all the more uncomfortable. Or maybe perhaps he just needs to play around with the saddle height/stem length? Anyone with experience with this I would greatly appreciate. I was really looking forward to riding with him on a 40 mile loop along to coast of socal when I came home for the holidays. Thanks.
My dad (53) has been riding his bike for the past 3-4 months now and was complaining to me about numbing fingers that would make it impossible to ride any longer than 4-5 miles. At the time he was on a mtn bike so I told him a properly fitted road bike would fix that problem because it certainly helped me when I was in his position. Plus road bikes are awesome =). But anyway, so I just built up a road bike for him and he once again has these tingling numbing issues in his hands. He and my mom have been remodeling the house now that I moved out, and he does alot of the work himself. I was wondering if maybe this was putting too much stress on his hands, making riding all the more uncomfortable. Or maybe perhaps he just needs to play around with the saddle height/stem length? Anyone with experience with this I would greatly appreciate. I was really looking forward to riding with him on a 40 mile loop along to coast of socal when I came home for the holidays. Thanks.
#2
Senior Member
Join Date: Jun 2006
Posts: 2,023
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
Barring any special physical problems unique to your dad, the usual advice is wear good gloves, try shock absorbing gel tape, change hand positions often, rest your weight on different parts of the hands (the "heel", the side, between various fingers), keep elbows flexed, bring the saddle up to seat level or so to put more weight back on the seat and off the hands. If your dad is experienced and flexible enough (I'm 59), an aero bar can really rest the hands, too. This is one of those things were tiny changes in position can make real changes in comfort. Sometimes, I think, we are sometimes simply born with sensitive or easily aggravated parts of our body. But its worth trying all of the aboved.
Our recumbent friends will, as they often do, suggest a 'bent bike for real hand comfort.
Our recumbent friends will, as they often do, suggest a 'bent bike for real hand comfort.
#3
Senior Member
Join Date: Apr 2006
Location: Brazos River valley, south central TX
Posts: 1,298
Bikes: 2015 Scissortail hardtail MTB, 2013 XL Longbike USS recumbent, 2010 Hans Schneider steel randonneur road bike, 2005 Surly LHT;
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
microadjustments & movement
Stealth:
Many of us 50+ers have dealt with numbing fingers after/during a ride. For many of us, getting the 'fit' & angle between seat & handlebars was key, for others just moving around on the bike (standing up, having at least 2 hand positions, etc.) helped, adjusting weight distribution between seat & bars have ALL been part of addressing this issue. If you search this thread you'll find some very articulate explanations of the Numb Fingers syndrome.
On my steel MTB converted to road/commuter, I had to raise the stem, add good barends, go through 3 saddles, wrap both flat bar & barends with good thick padding and remember my riding position needed to be adjustable & flexible. For example, I would be riding along, pushing the cadence & realize I'd held the same hand position for at least 10 minutes without moving. That was not necessary, just a riding habit that would cause then the numbness to start.
CC's recommendation of good padded gloves is completely correct as well. I finally took my MTB in to the LBS where we spent an hour getting everything 'fitted' - this is on a bike that is too small for me but has been modified such that now I can ride comfortably for up to 4 hours. Also as your dad rides more, his positioning and way of riding will change (like getting used to the seat...?) so slowly tweaking the bike's configuration to match his comfort/fitness level will help a lot.
Many of us 50+ers have dealt with numbing fingers after/during a ride. For many of us, getting the 'fit' & angle between seat & handlebars was key, for others just moving around on the bike (standing up, having at least 2 hand positions, etc.) helped, adjusting weight distribution between seat & bars have ALL been part of addressing this issue. If you search this thread you'll find some very articulate explanations of the Numb Fingers syndrome.
On my steel MTB converted to road/commuter, I had to raise the stem, add good barends, go through 3 saddles, wrap both flat bar & barends with good thick padding and remember my riding position needed to be adjustable & flexible. For example, I would be riding along, pushing the cadence & realize I'd held the same hand position for at least 10 minutes without moving. That was not necessary, just a riding habit that would cause then the numbness to start.
CC's recommendation of good padded gloves is completely correct as well. I finally took my MTB in to the LBS where we spent an hour getting everything 'fitted' - this is on a bike that is too small for me but has been modified such that now I can ride comfortably for up to 4 hours. Also as your dad rides more, his positioning and way of riding will change (like getting used to the seat...?) so slowly tweaking the bike's configuration to match his comfort/fitness level will help a lot.
__________________
centexwoody
They're beautiful handsome machines that translate energy into joy.
centexwoody
They're beautiful handsome machines that translate energy into joy.
#4
Resident Old Fart
Join Date: Sep 2004
Location: Tallahassee, FL
Posts: 1,295
Bikes: Douglas Precision Ti
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I was having trouble too, so last week I installed a set of Aztec pads that I got from Performance. I rode a century yesterday with no numbness at all. You might try try them.
__________________
Wag more, bark less
Wag more, bark less
#5
Senior Member
Tell him he need to relax his grip and unlock his elbows while riding. It's very common for new and many experienced riders to stiffen.
He probably rides with his hands on the brake all of the them too. Take a deep breath and let every part of your uppper body sag and unlock elbows.
He probably rides with his hands on the brake all of the them too. Take a deep breath and let every part of your uppper body sag and unlock elbows.
#6
Scott
Join Date: Jun 2006
Posts: 2,393
Bikes: Too Many
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
This may sound silly but it works for me! Don’t grip the bars with your thumb. Just place your thumb beside your other fingers and cup your other four fingers around the bar supporting your weight in the palms. Of course, when you need to use the brakes get your thumb around the bar! I think this prevents me from tightly griping the bar so my hands are relaxed when I am not using my thumbs. My bike Elmer from childhood days taught me that trick.
#7
Senior Member
Join Date: Mar 2006
Location: Montgomery County, Pennsylvania
Posts: 6,489
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 6 Times
in
2 Posts
All the posts preceding this one offer good advice on places to start. It is most likely an issue of too much pressure and/or vibration on the hands/palms. The distribution of weight between the seat and handlebars is critical related to too much pressure. Generally speaking, the more bent over one is, the more the seat needs to be back on the seat rail. Stand with your back and legs against a wall and try to bend over at the waist. You can't do this unless your rear end can move backwards in direct relationship to the amount you are bending. Hence, many riders are out of balance because their seat is not back far enough. Additionally, most riders fare better with their seats set so that they are level or with the nose slightly up. This places more of the weight on the rear and less on the arms and hands. Good gloves, two layers of bar tape of other padding can also help. With the arms bent at the elbows you're using them as shock absorbers of sorts. So, there are lots of good places to start in addressing this. Hope your dad gets it worked out soon.
__________________
A conclusion is the place where you got tired of thinking. - S. Wright
Favorite rides in the stable: Indy Fab CJ Ti - Colnago MXL - S-Works Roubaix - Habanero Team Issue - Jamis Eclipse carbon/831
A conclusion is the place where you got tired of thinking. - S. Wright
Favorite rides in the stable: Indy Fab CJ Ti - Colnago MXL - S-Works Roubaix - Habanero Team Issue - Jamis Eclipse carbon/831
Last edited by NOS88; 10-09-06 at 08:05 AM.
#8
Senior Member
I read all the suggestions, and all seem very well thought out. I also experience numbness in my fingers on occasion. Having ridden road bikes since the early 80's, this has been a recent occurence. I have traced it back to the way one of the bikes is setup. It is an unforgiving Scandium frameset which translates much of the road through the frame to the seat and bars. I don't have this problem with my other framesets which are steel, CF, and titanium. At first I attributed the numbness to the frame, but after experimenting with more compliant parts (CF bars, fork, more forgiving wheels, etc.) I have come to a variety of conclusions. The parts selection is definitely critical, but the setup itself is the most critical, a slight up or down of the saddle (no slope to the saddle is imperative for me.) or bars is the most effective way for me to eliminate the numbness. I measured the other bikes and tried to emulate the setup with this particular bike. I still experience numbness on occasion with this bike, but I have eliminated it for most rides by careful setup, and constantly changing my hand position while riding.
I also reserve this bike for rides of 50 miles or less.
I also reserve this bike for rides of 50 miles or less.
#9
Roadkill
Join Date: Sep 2004
Location: East Tennessee
Posts: 858
Bikes: 2002 Lightspeed Classic; 2010 Pedalforce RS
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Being another that has this problem whenever I increase my mileage, I agree with most of the advice here. But especially the advice to not grip with your thumb, just keep it parallel to the other fingers. Another thing that helps a lot for me I haven't been mentioned, is keeping my wrists straight and not let the hands rotate up.
#10
Senior Member
Thread Starter
Join Date: Jul 2006
Location: SoCal
Posts: 756
Bikes: custom built roadie
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
thanks for all the great tips everyone. i will be sure to pass this all down to my dad. it's great to know that this problem has many possible remedies.
#11
His Brain is Gone!
Join Date: Sep 2006
Location: Paoli, Wisconsin
Posts: 9,979
Bikes: RANS Stratus, Bridgestone CB-1, Trek 7600, Sun EZ-Rider AX, Fuji Absolute 1.0, Cayne Rambler 3
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
Thanks from me too. I'm having the same problem. Took a 45 minute ride today, my longest in nearly 30 years, and my hands went numb on me twice.
I have an 80's city bike, a forecursor to today's hybrids, but without quite as much of an upright sitting position. I have to lean forward a bit and the weight begins to hurt my hands within 6-8 minutes. I've raised the handlebar to its maximum height, adjusted the saddle to give me my most upright position, purchased padded bike gloves, and have tried changing my hand positions and shaking them from time to time. This has helped a little.
On my first few rides my saddle was killing me too. I installed an add-on seat cushion and between that and riding a few times to get more used to it, that is no longer a problem. After 45 minutes today I was fine, whereas 3 weeks ago a 5-minute ride was painful.
But my hands aren't coming around so easily. Right now the pain in my hands is the only thing making my rides unenjoyable.
I might have to switch to a full hybrid or crank-forward. I've taken 5-10 minute test rides on both and they were wonderful.
I have an 80's city bike, a forecursor to today's hybrids, but without quite as much of an upright sitting position. I have to lean forward a bit and the weight begins to hurt my hands within 6-8 minutes. I've raised the handlebar to its maximum height, adjusted the saddle to give me my most upright position, purchased padded bike gloves, and have tried changing my hand positions and shaking them from time to time. This has helped a little.
On my first few rides my saddle was killing me too. I installed an add-on seat cushion and between that and riding a few times to get more used to it, that is no longer a problem. After 45 minutes today I was fine, whereas 3 weeks ago a 5-minute ride was painful.
But my hands aren't coming around so easily. Right now the pain in my hands is the only thing making my rides unenjoyable.
I might have to switch to a full hybrid or crank-forward. I've taken 5-10 minute test rides on both and they were wonderful.
#12
On the road again!
Join Date: Jul 2006
Posts: 30
Bikes: 2006 Specialized Sirrus Sport, 2006 Bianchi Giro
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
For some people, it could be a question of neck position on a road bike - if there are cervical disc problems. Leaning forward, trying to look up - that kind of thing.
__________________
2006 Bianchi Giro
2006 Specialized Sirrus Sport
2006 Specialized Sirrus Sport
#13
Senior Member
Originally Posted by Tom Bombadil
Thanks from me too. I'm having the same problem. Took a 45 minute ride today, my longest in nearly 30 years, and my hands went numb on me twice.
But my hands aren't coming around so easily. Right now the pain in my hands is the only thing making my rides unenjoyable.
I might have to switch to a full hybrid or crank-forward. I've taken 5-10 minute test rides on both and they were wonderful.
But my hands aren't coming around so easily. Right now the pain in my hands is the only thing making my rides unenjoyable.
I might have to switch to a full hybrid or crank-forward. I've taken 5-10 minute test rides on both and they were wonderful.
#14
Senior Member
Join Date: Mar 2006
Location: Montgomery County, Pennsylvania
Posts: 6,489
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 6 Times
in
2 Posts
Originally Posted by capejohn
I would suggest a 45 minute test ride. Someone really should ride with you to observe your technique.
Very good point. The eye of an experienced cyclist can be very helpful.
__________________
A conclusion is the place where you got tired of thinking. - S. Wright
Favorite rides in the stable: Indy Fab CJ Ti - Colnago MXL - S-Works Roubaix - Habanero Team Issue - Jamis Eclipse carbon/831
A conclusion is the place where you got tired of thinking. - S. Wright
Favorite rides in the stable: Indy Fab CJ Ti - Colnago MXL - S-Works Roubaix - Habanero Team Issue - Jamis Eclipse carbon/831
#15
Senior Member
Join Date: Sep 2004
Location: North Central Massachusetts
Posts: 1,281
Bikes: Cannondale R600
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Last season I had this problem; this season my hands are fine, but I have problems with my feet!
For me, getting more flexibility so that I could stretch out a bit helped me ride lower which took weight off the hands. Also, both my bikes have "flattop" type road bars - one set more or less conventional, and the other FSA K-Wing. Both help provide a good "platform" for resting your hands. A lot of my problems initially came because the reach was a little far for me and I ended up placing my hands with the "slot" of the heel of my hand on the "corner" of the bars. That slot is where the nerves run, so it was compressing the nerves, causing numbness.
One trick I used at first was to cut out a piece of a Dr. Scholl's insole (gel) about the size of a coaster and put it in my gloves in that slot area (whicj usually doesn't have any padding). Until I got everything else worked out, this was quite effective. I don't use this padding anymore, though. For me, it was a matter of getting the fit dialed in.
For me, getting more flexibility so that I could stretch out a bit helped me ride lower which took weight off the hands. Also, both my bikes have "flattop" type road bars - one set more or less conventional, and the other FSA K-Wing. Both help provide a good "platform" for resting your hands. A lot of my problems initially came because the reach was a little far for me and I ended up placing my hands with the "slot" of the heel of my hand on the "corner" of the bars. That slot is where the nerves run, so it was compressing the nerves, causing numbness.
One trick I used at first was to cut out a piece of a Dr. Scholl's insole (gel) about the size of a coaster and put it in my gloves in that slot area (whicj usually doesn't have any padding). Until I got everything else worked out, this was quite effective. I don't use this padding anymore, though. For me, it was a matter of getting the fit dialed in.
#16
Senior Member
Join Date: Jul 2006
Location: Delta, Colorado
Posts: 304
Bikes: 2007 Specialized Sirrus Comp, 1988 Diamond Back Ascent
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
All of the above works well for me. Not mentioned yet, but effective for dealing with some disc compression problems and the related pressure on nerves, is to work on your core muscles. Since going through physical therapy for a back injury, my hands seldom go numb, partly because my core is much stronger. This also relates to riding relaxed -- stronger core means I'm not putting near as much pressure on the arms to "hold my body up." Buy your dad an exercise ball and ask him to do core exercises during the football game.
#17
Senior Member
What core building exercises are you doing? I have chronic hand numbness, and know I have a weak core. I could use some ideas on core strengthening.
#18
Senior Member
Join Date: Jul 2006
Location: Delta, Colorado
Posts: 304
Bikes: 2007 Specialized Sirrus Comp, 1988 Diamond Back Ascent
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
core exercises
Check out this link for good variety of core exercies --
https://www.back.com/articles-exercises.html
This is the site my therapist suggested to start with. Has basic to advanced.
He also suggested swimming -- low impact but great workout. While in the pool, he gave me a long list of core exercises to do while grabbing the side of the pool. Not only helps with the core, but greatly improved my flexibility. Basic stretches are also an important component.
https://www.back.com/articles-exercises.html
This is the site my therapist suggested to start with. Has basic to advanced.
He also suggested swimming -- low impact but great workout. While in the pool, he gave me a long list of core exercises to do while grabbing the side of the pool. Not only helps with the core, but greatly improved my flexibility. Basic stretches are also an important component.
#20
His Brain is Gone!
Join Date: Sep 2006
Location: Paoli, Wisconsin
Posts: 9,979
Bikes: RANS Stratus, Bridgestone CB-1, Trek 7600, Sun EZ-Rider AX, Fuji Absolute 1.0, Cayne Rambler 3
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
Originally Posted by Tom Bombadil
Thanks from me too. I'm having the same problem. Took a 45 minute ride today, my longest in nearly 30 years, and my hands went numb on me twice.
Thanks for the suggestions offered here. I went out this morning and rode for 50 minutes. Used some of the techniques in this thread and the pain in my hands was considerably lower. No numbness at all. Much more enjoyable.
#21
Time for a change.
Join Date: Jan 2004
Location: 6 miles inland from the coast of Sussex, in the South East of England
Posts: 19,913
Bikes: Dale MT2000. Bianchi FS920 Kona Explosif. Giant TCR C. Boreas Ignis. Pinarello Fp Uno.
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Likes: 0
Liked 5 Times
in
4 Posts
Originally Posted by Tom Bombadil
Thanks for the suggestions offered here. I went out this morning and rode for 50 minutes. Used some of the techniques in this thread and the pain in my hands was considerably lower. No numbness at all. Much more enjoyable.
__________________
How long was I in the army? Five foot seven.
Spike Milligan
How long was I in the army? Five foot seven.
Spike Milligan