|
Originally Posted by BluesDawg
(Post 13025178)
A little more involved than I do, but I'm sure it works. By the way, the scuffing with the scraper or sandpaper is to make the patch area rough, not smooth. That gives the adhesive more surface area to bond the patch to the tube.
|
Originally Posted by BluesDawg
(Post 13023835)
I have had some failures with the stick on patches. .
|
Originally Posted by BluesDawg
(Post 13025178)
A little more involved than I do, but I'm sure it works. By the way, the scuffing with the scraper or sandpaper is to make the patch area rough, not smooth. That gives the adhesive more surface area to bond the patch to the tube.
|
I heard continental has come out, or is coming out with a new tube compound which can handle both summer air and winter air.
From the review I read, they weigh slightly more than season-sensitive tubes, and cost about 30% more. But having been bitten so many times in the past, I don't care if they cost twice as much as regular tubes. I plan to buy a half dozen of them. |
Originally Posted by billydonn
(Post 13025685)
I have found the scuffing step very hard to accomplish with the narrow tube flexing around etc. Even getting the little rib sanded off the tube seems nigh on to impossible to me. The glue on patches seem to work okay without that step so I have mostly given up on it. If there is a trick to successful scuffing anyone please tell me the secret.
|
Over 4000 miles since the last flat, sometime last fall. The flat tire demons have passed me by and forgotten I exist. I will never, ever have another flat. My tires are strong, they are invincible, they are woman. I've decided to save weight on long rides way out into the swamp where there is no cell phone service by leaving my tube, levers, and pump at home.
|
Originally Posted by JanMM
(Post 13025644)
Park, or some other brand/s?
|
Originally Posted by billydonn
(Post 13025685)
I have found the scuffing step very hard to accomplish with the narrow tube flexing around etc. Even getting the little rib sanded off the tube seems nigh on to impossible to me. The glue on patches seem to work okay without that step so I have mostly given up on it. If there is a trick to successful scuffing anyone please tell me the secret.
|
I still have the same air in the tires that came with the bike when I bought it!
Be sure to check the inside of the tire to remove any shards of glass or you will have a second flat right away - learned this the hard way... |
I have to ask this... Are modern bikes, or at least some types of same, particularly prone to flats? I ask because although I am a new returnee to riding, my youth was spend on a bicycle - indeed one not too different from the `69 Raleigh I ride now. And I NEVER, no NEVER got a flat. Never. Nor to my knowledge did my parents who took my even then old Rudge (and my girlfriend's) down to FL when they retired and rode them and rode them and rode them.
What gives? And just as I never got a flat I was never particularly fussy about air pressure either. Now I am, measuring and pumping in a few lbs each weekend. (I keep mine at 65lbs rear, 60 lbs front.) -don |
Originally Posted by JohnTP
(Post 13026533)
I still have the same air in the tires that came with the bike when I bought it!
Be sure to check the inside of the tire to remove any shards of glass or you will have a second flat right away - learned this the hard way... |
Mods, please close this thread. I've had two flats since it became active and can only blame BF and Internet Brands.
|
Originally Posted by JohnTP
(Post 13026533)
I still have the same air in the tires that came with the bike when I bought it!
|
Originally Posted by duceditor
(Post 13028424)
I have to ask this... Are modern bikes, or at least some types of same, particularly prone to flats? I ask because although I am a new returnee to riding, my youth was spend on a bicycle - indeed one not too different from the `69 Raleigh I ride now. And I NEVER, no NEVER got a flat. Never. Nor to my knowledge did my parents who took my even then old Rudge (and my girlfriend's) down to FL when they retired and rode them and rode them and rode them.
What gives? I believe for the most part we are talking about road tyres. These thin tyres just don't have the think rubber carcass ye olde balloon tyres had. And apparently rubber isn't that great holding 100 psi air pressure. You can buy road tyres with a Kevlar belt that should help prevent flats. Sometimes it just seems to be luck. Got almost 3 years on Continental GT4000's without flats. Now trying to wear out the last of my Bontrager Select tyres and have a couple flats with each. Some ride in areas with thorns (goat heads) and those who ride on road also can flat from the fine wires that come out of steel belted radial auto tyres. Something we didn't have a few decades ago, except for those few sport cars with Michelin X tyres. And just as I never got a flat I was never particularly fussy about air pressure either. Now I am, measuring and pumping in a few lbs each weekend. (I keep mine at 65lbs rear, 60 lbs front.) -don |
Originally Posted by teachme
(Post 13022844)
3 miles into my ride this morning and I pinched my rear tire on a turn. Still trying to learn to be proficient at changing/repairing a flat in the field. I'm equipped with a patch kit and CO2 cartridges. I bought one of those Topeaka CO2 Cobra triggers. It worked fine and I was able to ride home the 3 miles for a total of 6 miles.
My questions are: Does the tube need to be drained of CO2 and filled with air? And should the repaired tube be discarded in favor of a new one? As for your questions - I let out the CO2 and refill the tire from my compressor - after I replace the tube. Im one of those who doesn't like patched tubes. |
| All times are GMT -6. The time now is 01:11 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.