Tern Link C8 questions for upgrades
 

Hey all,

Recently I got a Tern Link C8 8 Speed folder. I'm very happy with it so far. I just have a few issues that I want to resolve though and I though there is not a better place to ask :P

So I got 2 major issues and 2 smaller ones.

1) It feels like the handlepost is low. I'm not that tall (180 cm) but it feels like I'm bending too much in order to grab the handlebar. In order to resolve that issue, I searched online for stem extensions and I found out that there are some tested solutions such as the litepro double stem.

However I read a fair share of forums and topics on that and I found out that there is a considerable risk involved about the stiffness and durability of the stem due to that extra link. I really don't want to risk the quick release stem breaking so I want an expert's opinion about that upgrade. Is it worth it? Should I save up and get a T-bar and an andros system in the future and get done with it once and for all?

2) To be honest I have not a lot of experience with folding bikes, but it feels like the default handlebar is a bit short. My problem is that the bike feels like it is way more sensitive on steering than a proper 26 bike and I sense that this is due to the combination of the 20' inch wheels as well as the short handlebar. So what I was thinking was to find a way to either install a new wider handlebar or a handlebar with bullhorns so that I can hold it steadier. Again I want some help and advice from the experts. At the end it might just be that I haven't got used to it.

3) The default magnetix is weak, When you don't move anything it holds everything really tight together, but when rolling the bike folded, the slightest turn can detach the magnets and unfold the bike so the process gets a bit cumbersome. I read that installing the upgraded magnetix of the 26 tern folders or dahon's magnetix can solve the issue, but again I want some help from other bikers that may have already tried that or have just worked around the issue otherwise.

4) Fenders. The bike shop told me that the only fenders I can install are the SKS fenders, but I'm afraid they are going to add considerable weight to the bike and this is absolutely not wanted. Is there any other solution? maybe with some mountain bike like fenders and mudguards??


thanks a lot in advance

sks are the lightest full fenders
tern magnetix from the first years is similar in strength to Dahon, the later magnetix are FAR stronger
Handlebar to low... aber hallo is the easiest
changing handleposts to a tern one will be expensive
others will do but you will have to cut the steerer tube or use washers

Thanks for the reply.
Is Aber hallo safe though? Aren't there chances for the QR to break?
I suppose if I get a stem extender changing handlebars will be easy right?

I have sold hundreds if not thousands over the years and I am not aware of any problems. My fiancée and myself have one on our bikes as well.

Thats what I wanted to hear. Comparing Aber Hallo and Litepro stem what would you suggest? Litepro is the easiest one to find thats why I'm asking.