Bike Forums

Bike Forums (https://www.bikeforums.net/forum.php)
-   Forum Suggestions & User Assistance (https://www.bikeforums.net/forum-suggestions-user-assistance/)
-   -   Reported Post in Thread: " Looking for Cyclart " by gugie (https://www.bikeforums.net/forum-suggestions-user-assistance/1157932-reported-post-thread-looking-cyclart-gugie.html)

gugie 10-14-18 10:08 AM

Reported Post in Thread: " Looking for Cyclart " by gugie
 
gugie has reported a post.

Reason:

Admin: in-line photo URL's are sometimes not working for me. I click on the picture icon, and nothing happens. Using Chrome and Windows 10
Post: Looking for Cyclart
Forum: Classic & Vintage
Assigned Moderators: lotek, Siu Blue Wind

Posted by: gugie
Original Content:


Originally Posted by merziac (Post 20165934)
Ed Litton belongs on this list...
I would consult @gugie for direction on the dimpling, he should have some words of wisdom.

I've got an Ed Litton paint job from 5 years ago, and a buddy of mine had a cantilever fork repair/repaint job a few years back, but same buddy is trying to get a frame painted by him, but hasn't had success in connecting for a few months now, and is moving on. Ed does (did?) great work, but was always late and later on promises. Perhaps he's retired now? Anybody know?
@Andy_K has had good success with Jeff Bock in Iowa.

As far as dimpling goes, you're going to have significantly less stiff chainstays if you do that, which may be ok for a light rider or someone who mostly sits and spins up hills. As others have pointed out, this may not be a good candidate fora 650b conversion. If you're doing a full repaint anyway, check to see the widest tire you can get put on the fork. If you can get a 700c x 32 in there with your brakes, then it may be useful to relocate the rear brake bridge, which isn't very difficult for framebuilder to do. I've found that sometimes the clearance doesn't match between front and rear. 32's will give you a significantly cushier ride than 28's.

If you're ok with powder coat, a good recommendation would be Groody Brothers in Kansas City. Mark Rainey there does brazing as well as powder coat, and can re-decal and clear coat as well for a pretty reasonable price. He powder coated a couple of frames for me, including my" Eroica" Grand Sport

Rollfast 10-14-18 11:17 PM

https://www.bikeforums.net/forum-sug...t-picture.html

What were you doing when you tried to post it? Was the image too large? Resize it and try again.


All times are GMT -6. The time now is 09:27 PM.


Copyright 2018 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.