big ding on the down tube
08-15-23, 07:10 PM
#1
buy my bikes
Thread Starter
Join Date: Jun 2014
Location: Michigan
Posts: 1,732
Bikes: my very own customized GUNNAR CrossHairs
Mentioned: 19 Post(s)
Tagged: 0 Thread(s)
Quoted: 496 Post(s)
Liked 352 Times
in
220 Posts
big ding on the down tube
me again - with a whole ‘nother rescue attempt
i picked up a $30 Origin8 Fix8 frame. Kind of a very low end Taiwan TIG fixed gear frame. I hope Taiwanese.
It was FB advertised with a stuck BB. I opted to take on the challenge. And a stuck seat post.
before I put more sweat into those issues, is this down tube ding of any concern?
When I picked up the frame my first thought was the ding is in an area of tension, so it won’t get worse. And before I repaint, I’ll roll it in wood blocks and bondo.
Any comments- as always-appreciated.
i picked up a $30 Origin8 Fix8 frame. Kind of a very low end Taiwan TIG fixed gear frame. I hope Taiwanese.
It was FB advertised with a stuck BB. I opted to take on the challenge. And a stuck seat post.
before I put more sweat into those issues, is this down tube ding of any concern?
When I picked up the frame my first thought was the ding is in an area of tension, so it won’t get worse. And before I repaint, I’ll roll it in wood blocks and bondo.
Any comments- as always-appreciated.
08-15-23, 08:04 PM
#2
Senior Member
Join Date: Feb 2012
Location: Rochester, NY
Posts: 17,682
Bikes: Stewart S&S coupled sport tourer, Stewart Sunday light, Stewart Commuting, Stewart Touring, Co Motion Tandem, Stewart 3-Spd, Stewart Track, Fuji Finest, Mongoose Tomac ATB, GT Bravado ATB, JCP Folder, Stewart 650B ATB
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4023 Post(s)
Liked 3,441 Times
in
2,090 Posts
I wouldn't be too worried about this dent. Fill away but do monitor. Andy
__________________
AndrewRStewart
AndrewRStewart
