Go Back  Bike Forums > Bike Forums > Framebuilders
Reload this Page >

Wanting a custom frame

Notices
Framebuilders Thinking about a custom frame? Lugged vs Fillet Brazed. Different Frame materials? Newvex or Pacenti Lugs? why get a custom Road, Mountain, or Track Frame? Got a question about framebuilding? Lets discuss framebuilding at it's finest.

Wanting a custom frame

Old 03-24-08, 10:03 AM
  #1  
Senior Member
Thread Starter
 
Join Date: Aug 2006
Location: SF Bay Area
Posts: 62

Bikes: Trek Portland (after numerous flings with other bikes)

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Wanting a custom frame

By way of short introduction: I am somewhere between a strong casual rider and a non-competitive avid rider. I have owned drop bar and flat bar bikes and flop back and forth, currently I am searching for a flat bar bike that I can ride on 1 hour 'fitness rides' and on lots of errands as I intend not to use my car except when really necessary (I even just bought a dog trailer for trips to the dog park). Eventually, I would like to take longer rides but time is more of a constraint right now. I love bikes as the transportation devices they are (bikes are going to be the golden story of the coming depression) and the sexy technology that so many exhibit. I love how someone can start with a frame and put together a machine that is uniquely theirs. I test ride and pour over geometry charts like a woman possessed. But truthfully, there is no off the rack bike that is going to fit me and I am tired of playing stump the LBS because I need to make a purchase having sold my last bike a tad prematurely and being relegated to a comfort hybrid belonging to one of my boys.

The issue is my geometry. I am 5'10" with a 35" inseam and a 32" sleeve (I am not completely sure how to measure sleeve. That is from a man's shirt that fit; from pit to wrist break is 23"). What would be perfect would be something like a 59cm bike standover and a 56cm bike top tube. One bike fitter observed since my leg length is more in the femur, while an even shorter top tube might work for my arms, it never would for my knees, and the seat could not be moved forward. In this latest round of bike searching, I discovered steel bikes and am now hankering for one of those. Noodling around on the internet I discovered that custom frame building is not as uncommon as I thought and thus this inquiry was borne. Once I had the frame, I would dress it in mid-level components.

So, approximately how much and how long for such a frame? Any recommendations for builders? I live on the peninsula of the SF Bay area but I am open to other areas. Right now, my plan is to buy one of the off the rack bikes with a too long top tube, play some stem games, and then in a year pass it down to one of my kids.

Thanks for your wisdom.

FP
Felicity is offline  
Old 03-24-08, 10:59 AM
  #2  
Senior Member
 
swc7916's Avatar
 
Join Date: Sep 2007
Location: Machias, WA
Posts: 718

Bikes: Rodriguez Toucan tandem, Rodriguez Rainer Lite sport/touring

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Try R+E Cycles (www.rodcycle.com) in Seattle. They specialize in fitting and are very good for the hard-to-fit.
swc7916 is offline  
Old 03-24-08, 11:19 AM
  #3  
Senior Member
 
late's Avatar
 
Join Date: Oct 2002
Location: Southern Maine
Posts: 8,937
Mentioned: 129 Post(s)
Tagged: 0 Thread(s)
Quoted: 12171 Post(s)
Liked 1,479 Times in 1,092 Posts
Waterford has a 'budget' brand called Gunnar. Like Waterford, they are some of the
berst bikes money can buy. Give 'em a call. There should be a dealer somewhere, for either Waterford or Gunnar. Both can be custom. Try a test ride.

https://www.gunnarbikes.com/
late is online now  
Old 03-24-08, 01:52 PM
  #4  
Worker Ant
 
maddog17's Avatar
 
Join Date: Oct 2007
Location: Peabody, Mass. U.S.A.
Posts: 142

Bikes: Ted Wojcik road and Iron Horse Hollowpoint mtb

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
is there a price limit were dealing with? and if you have to go custom, we're only looking for a frame, correct? off the top of my head, Colnago and Gios both offer 58 or 59 with 56 and change top tubes amd both offer steel frames. Gios is the cheaper choice, Excel sports in colorado is the only dealer i know of in the US. last i checked the frames were about $800 and that would leave you to choose a fork. the Colnago Master X Light goes for over $2000 for frame/fork. you got IF, Seven, Serotta all have fit systems and do custom builds as well as a bunch of small builders who will work with you to get your size correct. Steelman, Wojcik, Strong, are a few of the small builders that will work with you on the build. if the sizing is important to you, and it sounds like it is, then i would find a LBS that can do a proper fit for you, you'll probably end up paying for it, but you may be able to spin that into a discount on the build if you get the bike thru them. going thru a builder you can at least talk to them and tell them what you want, what your gonna do, how your gonna use the bike etc.. might as well get what you pay for.
maddog17 is offline  
Old 03-24-08, 11:10 PM
  #5  
Senior Member
 
zonatandem's Avatar
 
Join Date: Dec 2003
Location: Tucson, AZ
Posts: 11,016

Bikes: Custom Zona c/f tandem + Scott Plasma single

Mentioned: 3 Post(s)
Tagged: 1 Thread(s)
Quoted: 77 Post(s)
Likes: 0
Liked 19 Times in 11 Posts
Co-Motion in Eugene, OR
zonatandem is offline  
Old 03-24-08, 11:13 PM
  #6  
Senior Member
 
BengeBoy's Avatar
 
Join Date: Jul 2007
Location: Seattle, Washington, USA
Posts: 6,955

Bikes: 2009 Chris Boedeker custom; 2007 Bill Davidson custom; 2021 Bill Davidson custom gravel bike; 2022 Specialized Turbo Vado e-bike

Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Liked 9 Times in 8 Posts
Originally Posted by swc7916
Try R+E Cycles (www.rodcycle.com) in Seattle. They specialize in fitting and are very good for the hard-to-fit.
+1

Reasonable price. Reasonable lead times. Nice people.
BengeBoy is offline  
Old 03-26-08, 08:01 PM
  #7  
Senior Member
Thread Starter
 
Join Date: Aug 2006
Location: SF Bay Area
Posts: 62

Bikes: Trek Portland (after numerous flings with other bikes)

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Thank you all for your suggestions! I am going to look into this for my next bike, maybe get it started in fall/winter when I suspect things are a little slower. I just bought a Jamis Coda Elite and will look into the custom process after the summer of riding on steel. I love that there are domestic frame fabricators and I predict they will be very busy in the years ahead!
Felicity is offline  
Old 03-26-08, 09:47 PM
  #8  
Decrepit Member
 
Scooper's Avatar
 
Join Date: Aug 2005
Location: Santa Rosa, California
Posts: 10,489

Bikes: Waterford 953 RS-22, several Paramounts

Mentioned: 71 Post(s)
Tagged: 0 Thread(s)
Quoted: 634 Post(s)
Liked 68 Times in 57 Posts
Closer to home, there's Steelman in Redwood City, Ahrens in San Jose, Bruce Gordon in Petaluma, John Caletti in Santa Cruz, Kish in San Luis Obispo, Steve Rex in Sacramento, Rock Lobster in Santa Cruz, Steve Potts in Point Reyes, and SyCip in Santa Rosa.

You don't have to look very far to find top drawer framebuilders.
__________________
- Stan

my bikes

Science doesn't care what you believe.

Last edited by Scooper; 05-02-08 at 06:35 PM.
Scooper is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.