GT's "Vintage" Triple-Triangle Reynolds 853 Frame Question
#1
Senior Member
Thread Starter
Join Date: Oct 2006
Location: Illinois
Posts: 539
Bikes: No bike at the moment; In process of building it.
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
GT's "Vintage" Triple-Triangle Reynolds 853 Frame Question
I wasn't sure which forum my question would be most relevant in, but this seems like the place.
I've been looking for a second road-bike frame and I have my sights on a older GT Course made out of Reynolds 853, in the typical triple-triangle style GT was known for. This one might be a bit too big for me however (seller lives down the block), but there is one on Ebay right now too, in my size!
Anyway, I am curious if any of you know how these frames hold up? I wish to get into racing, and normally I'd be worried about racing steel, but the aluminum GT I have is pretty stiff and I think the triple-triangle design helps with that.
It is TIG welded and was made in Taiwan for GT by A-Pro, according to the Ebay listing. The question I am mostly interested in getting answered is the weight. I know 853 can come in different tube sizes/weights so I have no idea what to expect.
Here is the listing, so you can see it for yourself.
https://cgi.ebay.com/GT-Course-road-f...QQcmdZViewItem
I've been looking for a second road-bike frame and I have my sights on a older GT Course made out of Reynolds 853, in the typical triple-triangle style GT was known for. This one might be a bit too big for me however (seller lives down the block), but there is one on Ebay right now too, in my size!
Anyway, I am curious if any of you know how these frames hold up? I wish to get into racing, and normally I'd be worried about racing steel, but the aluminum GT I have is pretty stiff and I think the triple-triangle design helps with that.
It is TIG welded and was made in Taiwan for GT by A-Pro, according to the Ebay listing. The question I am mostly interested in getting answered is the weight. I know 853 can come in different tube sizes/weights so I have no idea what to expect.
Here is the listing, so you can see it for yourself.
https://cgi.ebay.com/GT-Course-road-f...QQcmdZViewItem
#3
"this is not suck"
Join Date: Feb 2008
Posts: 387
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 3 Times
in
3 Posts
everything I have ever ridden from GT (vintage, santa ana, CA=GT) has just been superb quality as far as the frames, and welding and general construction are concerned.
I just LOVE mine, and to be honest, I kinda beat the crap out of it, because of the way that last couple of GT's held up, and after owning a steamroller, I'd put my GT up against it any day (except the GT is 4 lbs lighter)
mine is infinity cro-mo, but I had one older 853 frame, and although it felt a tiny bit heavier, it was still springy, lively, and simply a joy to ride.
some people bag on GT's "slack" geometry, but I can just shred on that bike, so if thats what slack gives you, then I LIKE GT SLACK!
also I usually ride a 52cm, but mine is a 54cm, and with about an inch of post showing, and a slight riser neck, it fits me very comfortably, so I'd say from the 6 GT's I've owned, they run slightly small (at least the roady models)
if it's a deal, get it.
I just LOVE mine, and to be honest, I kinda beat the crap out of it, because of the way that last couple of GT's held up, and after owning a steamroller, I'd put my GT up against it any day (except the GT is 4 lbs lighter)
mine is infinity cro-mo, but I had one older 853 frame, and although it felt a tiny bit heavier, it was still springy, lively, and simply a joy to ride.
some people bag on GT's "slack" geometry, but I can just shred on that bike, so if thats what slack gives you, then I LIKE GT SLACK!
also I usually ride a 52cm, but mine is a 54cm, and with about an inch of post showing, and a slight riser neck, it fits me very comfortably, so I'd say from the 6 GT's I've owned, they run slightly small (at least the roady models)
if it's a deal, get it.