Go Back  Bike Forums > Bike Forums > Framebuilders
Reload this Page >

building a full suspension bike.

Framebuilders Thinking about a custom frame? Lugged vs Fillet Brazed. Different Frame materials? Newvex or Pacenti Lugs? why get a custom Road, Mountain, or Track Frame? Got a question about framebuilding? Lets discuss framebuilding at it's finest.

building a full suspension bike.

Old 06-21-14, 11:49 PM
  #1  
szvenig7
Newbie
Thread Starter
 
Join Date: Jun 2014
Posts: 2
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
building a full suspension bike.

I've dreamed for a while now of building a custom bike frame, and I decided that I want to make it a full suspension. I've done a lot of research on different rear suspension designs, and that for me thinking, why not use a front suspension fork as the rear suspension. It would be attached in almost the same way as on the front, and would solve the problems that each rear suspension has. I was just interested to hear what your guys' thoughts were.

Thanks,
Serge
szvenig7 is offline  
Old 06-22-14, 07:10 AM
  #2  
Andrew R Stewart 
Senior Member
 
Andrew R Stewart's Avatar
 
Join Date: Feb 2012
Location: Rochester, NY
Posts: 11,577

Bikes: Stewart S&S coupled sport tourer, Stewart Sunday light, Stewart Commuting, Stewart Touring, Co Motion Tandem, Stewart 3-Spd, Stewart Track, Fuji Finest, Raleigh Pro, Trek Cycle Cross, Mongoose tomac ATB, GT Bravado ATB, JCP Folder

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1705 Post(s)
Likes: 0
Liked 29 Times in 25 Posts
This has been done before, Manitou comes to mind. But the issues involved with rear suspension are rather different then the front. Hub width, chain tug, direction of bump forces WRT the "fork", the need for a swing arm and the changing CS length resulting are just some challenges. Andy.
Andrew R Stewart is offline  
Old 06-22-14, 11:11 AM
  #3  
fietsbob 
coprolite
 
fietsbob's Avatar
 
Join Date: Jun 2010
Location: NW,Oregon Coast
Posts: 41,572

Bikes: 8

Mentioned: 183 Post(s)
Tagged: 0 Thread(s)
Quoted: 6744 Post(s)
Likes: 0
Liked 158 Times in 134 Posts
Problem (hashtag) 1 ... a front fork has a 100mm wide space to put your wheel in .. rears are 135.
fietsbob is offline  
Old 06-22-14, 10:20 PM
  #4  
Andrew R Stewart 
Senior Member
 
Andrew R Stewart's Avatar
 
Join Date: Feb 2012
Location: Rochester, NY
Posts: 11,577

Bikes: Stewart S&S coupled sport tourer, Stewart Sunday light, Stewart Commuting, Stewart Touring, Co Motion Tandem, Stewart 3-Spd, Stewart Track, Fuji Finest, Raleigh Pro, Trek Cycle Cross, Mongoose tomac ATB, GT Bravado ATB, JCP Folder

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1705 Post(s)
Likes: 0
Liked 29 Times in 25 Posts
Originally Posted by fietsbob View Post
Problem (hashtag) 1 ... a front fork has a 100mm wide space to put your wheel in .. rears are 135.
IIRC the bike that I read about that used a Manitou fork as the basic of rear suspension also used a crown that had clamped stanchions. So a simple machining of a wider "crown" (yoke?) was the solution back then. Today most forks have pressed stanchions/crowns. So today's solutions will be different. Andy.
Andrew R Stewart is offline  
Old 06-25-14, 02:03 PM
  #5  
szvenig7
Newbie
Thread Starter
 
Join Date: Jun 2014
Posts: 2
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Ok. Thanks. I just wanted to know if it was theoretically possible to do something like that. I'm still trying to figure out what my options with this bike.
szvenig7 is offline  
Old 07-16-14, 01:57 PM
  #6  
Jax Rhapsody
Rhapsodic Laviathan
 
Jax Rhapsody's Avatar
 
Join Date: Jan 2013
Location: Louisville KY
Posts: 581

Bikes: Rideable; 83 Schwinn High Sierra. Two cruiser, bmx bike, one other mtb, three road frames, one citybike.

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 69 Post(s)
Likes: 0
Liked 1 Time in 1 Post
The best rear suspension(by design), I've ever seen on a general non specific(such as downhill, trials, etc) general purpose mtb, although it was implemented on a crrappy bike, with poor thought, is the rear suspension of aa Mongoose xr250.
Jax Rhapsody is offline  
Old 07-16-14, 08:50 PM
  #7  
Andrew R Stewart 
Senior Member
 
Andrew R Stewart's Avatar
 
Join Date: Feb 2012
Location: Rochester, NY
Posts: 11,577

Bikes: Stewart S&S coupled sport tourer, Stewart Sunday light, Stewart Commuting, Stewart Touring, Co Motion Tandem, Stewart 3-Spd, Stewart Track, Fuji Finest, Raleigh Pro, Trek Cycle Cross, Mongoose tomac ATB, GT Bravado ATB, JCP Folder

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1705 Post(s)
Likes: 0
Liked 29 Times in 25 Posts
Originally Posted by Jax Rhapsody View Post
The best rear suspension(by design), I've ever seen on a general non specific(such as downhill, trials, etc) general purpose mtb, although it was implemented on a crrappy bike, with poor thought, is the rear suspension of aa Mongoose xr250.
While I am no avid mountain biker I do find the design aspects very interesting. There are so many elements to play with, many are not understood well by the buying public. So enters the marketing department... Andy.
Andrew R Stewart is offline  
Old 07-18-14, 02:57 PM
  #8  
Jax Rhapsody
Rhapsodic Laviathan
 
Jax Rhapsody's Avatar
 
Join Date: Jan 2013
Location: Louisville KY
Posts: 581

Bikes: Rideable; 83 Schwinn High Sierra. Two cruiser, bmx bike, one other mtb, three road frames, one citybike.

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 69 Post(s)
Likes: 0
Liked 1 Time in 1 Post
Originally Posted by Andrew R Stewart View Post
While I am no avid mountain biker I do find the design aspects very interesting. There are so many elements to play with, many are not understood well by the buying public. So enters the marketing department... Andy.
I'm the same, I don't have a dedicates off road mtb, I'm not at a point in life where that is feasable. A lot of the designs are interesting, many look like they should work. I'm not to sure what you'rw getting at, not going to pretend and look a fool, I understand the marketing part, though. I'm saying if someone else did the xr250 rear suspension, it would've been a great bike. I loved the bike, it just wasn't a strong frame. I believe it was the best cheap f/s bike you could get, it had the best suspension.

Mongoose tend to use Element forks, many here may say they suck- I say they are pretty good, they are, or act progressive rate. The frame was aluminum, the rear suspension was steel(I still broke one of the control arms) and acted like a sla car suspension, or a bmw motorcycle rear suspension, eleminated the arching motion of most f/s rear ends. personally for a mountainbike that isn't a downhill, I would copy that suspension. Hell I want ti build such a suspension fir my moped.

you can zoom rhe pics in this thread www.bigboxbikes.com ? View topic - Mongoose xr250
Jax Rhapsody is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
PeregrineA1
Classic & Vintage
21
02-26-17 06:08 PM
greaterbrown
Northeast
0
04-12-13 05:28 PM
Rad Fondo
Road Cycling
0
05-31-12 10:58 AM
stabbypete
Singlespeed & Fixed Gear
1
09-07-05 06:15 PM
spartacus88
Mountain Biking
0
11-17-04 09:18 AM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright 2018 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.