are u-brakes a pain to deal with?
#1
Senior Member
Thread Starter
Join Date: Aug 2012
Posts: 63
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
are u-brakes a pain to deal with?
Been looking at new hybrid bikes, have narrowed it down to a couple models. One of them uses a u-brake type design on the rear wheel, down near the chain stays. Wondering if anyone here as experience with them, if you found them to be more problematic than regular brakes. Regular meaning V-brakes that you'd find in hybrid bikes. Bit worried about mud and other grime getting on the brake, and being difficult to adjust due to the position.
#2
.
Join Date: May 2006
Location: Hillsboro, Oregon
Posts: 3,981
Bikes: Specialized Roubaix Comp, Soma ES
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I had an old Bianchi mountain bike with that brake setup. I didn't have any issues with it really. Bad design for a mountain bike as it's going to get clogged with mud, but on the street, no issues at all. Probably won't be that big of a deal to work on either. Just flip the bike over. They stopped using them for a reason but I wouldn't not have a bike that had them.
__________________
Demented internet tail wagging imbicile.
Demented internet tail wagging imbicile.
#3
Senior Member
Join Date: Apr 2009
Location: New Rochelle, NY
Posts: 38,711
Bikes: too many bikes from 1967 10s (5x2)Frejus to a Sumitomo Ti/Chorus aluminum 10s (10x2), plus one non-susp mtn bike I use as my commuter
Mentioned: 140 Post(s)
Tagged: 1 Thread(s)
Quoted: 5781 Post(s)
Liked 2,577 Times
in
1,428 Posts
Not at all. it's a simple design and easy to work with, mainly because they never need to be worked with.
__________________
FB
Chain-L site
An ounce of diagnosis is worth a pound of cure.
Just because I'm tired of arguing, doesn't mean you're right.
“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN
WARNING, I'm from New York. Thin skinned people should maintain safe distance.
FB
Chain-L site
An ounce of diagnosis is worth a pound of cure.
Just because I'm tired of arguing, doesn't mean you're right.
“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN
WARNING, I'm from New York. Thin skinned people should maintain safe distance.
#4
Junior Member
Join Date: May 2015
Posts: 9
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
#5
DancesWithSUVs
Join Date: Apr 2005
Location: Griffin Cycle Bethesda,MD
Posts: 6,983
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 7 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
This bike?
Fuji Bikes | LIFESTYLE | FITNESS | ABSOLUTE 2.1
Yeah,it's going to be a bit of a PITA to work with,but it shouldn't need adjusting that frequently.
Fuji Bikes | LIFESTYLE | FITNESS | ABSOLUTE 2.1
Yeah,it's going to be a bit of a PITA to work with,but it shouldn't need adjusting that frequently.
__________________
C'dale BBU('05 and '09)/Super Six/Hooligan8and 3,Kona Dew Deluxe,Novara Buzz/Safari,Surly Big Dummy,Marin Pt Reyes,Giant Defy 1,Schwinn DBX SuperSport,Dahon Speed Pro TT,Brompton S6L/S2E-X
C'dale BBU('05 and '09)/Super Six/Hooligan8and 3,Kona Dew Deluxe,Novara Buzz/Safari,Surly Big Dummy,Marin Pt Reyes,Giant Defy 1,Schwinn DBX SuperSport,Dahon Speed Pro TT,Brompton S6L/S2E-X
#6
Banned
one precaution as the brake pads wear they move closer to the rim edge facing the pivot .. in the case of a U brake
that is the tire side .. Ive replaced more than 1 tire when the customer let the brake pad wear through the Tire..
U brakes are a common part on BMX Bikes.. in essence a really Beefy Center Pull .
that is the tire side .. Ive replaced more than 1 tire when the customer let the brake pad wear through the Tire..
U brakes are a common part on BMX Bikes.. in essence a really Beefy Center Pull .
#7
Senior Member
Join Date: Feb 2004
Location: St Peters, Missouri
Posts: 30,225
Bikes: Catrike 559 I own some others but they don't get ridden very much.
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 1572 Post(s)
Liked 643 Times
in
364 Posts
I'm going to disagree, at least to a point, with the pro U-brake folks.
I've worked on lots of BMX freestyle bikes with U-brakes and a cable detangler to allow you to spin the handlebar. There's lots barrel adjusters for balancing the various cable tensions and the front chainring i right where you need to get at to balance the return spring pressure. It sometimes takes my whole vocabulary to get one of those things right. Maybe I just never worked on enough BMX bikes for long enough to learn the right words.
I've worked on lots of BMX freestyle bikes with U-brakes and a cable detangler to allow you to spin the handlebar. There's lots barrel adjusters for balancing the various cable tensions and the front chainring i right where you need to get at to balance the return spring pressure. It sometimes takes my whole vocabulary to get one of those things right. Maybe I just never worked on enough BMX bikes for long enough to learn the right words.
__________________
My greatest fear is all of my kids standing around my coffin and talking about "how sensible" dad was.
My greatest fear is all of my kids standing around my coffin and talking about "how sensible" dad was.
#8
Senior Member
Thread Starter
Join Date: Aug 2012
Posts: 63
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
This bike?
Fuji Bikes | LIFESTYLE | FITNESS | ABSOLUTE 2.1
Yeah,it's going to be a bit of a PITA to work with,but it shouldn't need adjusting that frequently.
Fuji Bikes | LIFESTYLE | FITNESS | ABSOLUTE 2.1
Yeah,it's going to be a bit of a PITA to work with,but it shouldn't need adjusting that frequently.
Do y'all think it'd be a good idea to go up to the next model, the 1.9? That trades the v-brake and u-brake for discs. Never had disc brakes before, and there's not much info out there on those particular ones.
#9
.
Join Date: May 2006
Location: Hillsboro, Oregon
Posts: 3,981
Bikes: Specialized Roubaix Comp, Soma ES
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Not really. Those brakes work fine. I don't think discs are really necessary for 99% of bikes out there. Maybe if you riding a MTB in the mud, but not a bike like this.
__________________
Demented internet tail wagging imbicile.
Demented internet tail wagging imbicile.
#10
DancesWithSUVs
Join Date: Apr 2005
Location: Griffin Cycle Bethesda,MD
Posts: 6,983
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 7 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
Only if you're going to be riding in the rain/snow. The 1.9 is the same bike,only with discs,but they're pretty low-end models. You'd have to go farther up the chain to get a bike with decent discs. I also noticed that the next level up has an alloy fork,which is not an improvement over the 1.9/2.1 in terms of ride quality,so unless you're willing to spend the dosh on one of the higher models,I'd stick with the 1.9 or 2.1.
Not going to turn this into another disc vs rim flame war,but your 99% figure is way wrong. I commute in a hilly area in all weather,and wouldn't use anything else on my bad weather bike. Also numerous forumites from the PNW area who switched do to discs after wearing out their rims. If you prefer rim brakes,fair dinkum,but there are many of us who have found them useful.
Not going to turn this into another disc vs rim flame war,but your 99% figure is way wrong. I commute in a hilly area in all weather,and wouldn't use anything else on my bad weather bike. Also numerous forumites from the PNW area who switched do to discs after wearing out their rims. If you prefer rim brakes,fair dinkum,but there are many of us who have found them useful.
__________________
C'dale BBU('05 and '09)/Super Six/Hooligan8and 3,Kona Dew Deluxe,Novara Buzz/Safari,Surly Big Dummy,Marin Pt Reyes,Giant Defy 1,Schwinn DBX SuperSport,Dahon Speed Pro TT,Brompton S6L/S2E-X
C'dale BBU('05 and '09)/Super Six/Hooligan8and 3,Kona Dew Deluxe,Novara Buzz/Safari,Surly Big Dummy,Marin Pt Reyes,Giant Defy 1,Schwinn DBX SuperSport,Dahon Speed Pro TT,Brompton S6L/S2E-X
#11
Junior Member
Join Date: Apr 2015
Location: Ankeny IA
Posts: 18
Bikes: 2015 Fuji Absolute 1.9 disc
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
This bike?
Fuji Bikes | LIFESTYLE | FITNESS | ABSOLUTE 2.1
Yeah,it's going to be a bit of a PITA to work with,but it shouldn't need adjusting that frequently.
Fuji Bikes | LIFESTYLE | FITNESS | ABSOLUTE 2.1
Yeah,it's going to be a bit of a PITA to work with,but it shouldn't need adjusting that frequently.
Mark
#13
tcarl
Join Date: Dec 2010
Location: St. Louis, MO
Posts: 561
Bikes: Roark, Waterford 1100, 1987 Schwinn Paramount, Nishiki Professional, Bottecchia, 2 Scattantes, 3 Cannondale touring bikes, mtn. bike, cyclocross, hybrid, 1940's era Schwinn
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 27 Post(s)
Liked 9 Times
in
7 Posts
I have an old mountain bike with one. On that it's awful because of the mud issue. If you don't ride in the mud or leaves don't worry about that. It's a little more awkward releasing the cable to remove the rear wheel, but not that bad. For working on it (I agree with those above, you don't have to do that very much) you flip the bike upside down. I do have the impression that is has tremendous stopping power - (much) better than most brakes.
#14
Señor Member
Join Date: Feb 2013
Posts: 5,066
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 649 Post(s)
Liked 292 Times
in
215 Posts
I hated working on U brakes. There were clearance issues in every direction.
The only reason I can see for including these brakes on that bike is to allow all down-tube cable routing. Form over function.
The only reason I can see for including these brakes on that bike is to allow all down-tube cable routing. Form over function.
Thread
Thread Starter
Forum
Replies
Last Post
Fumbles22
General Cycling Discussion
0
04-15-13 11:40 AM
kakehvata
General Cycling Discussion
8
05-01-12 08:21 AM
momocycler
General Cycling Discussion
6
05-13-10 11:40 AM