![]() |
Originally Posted by Trekke
Don't really get the steel comment but since you put a big grin at the end don't know if I actually need to. :)
|
Well it sounds like if wireless is something you feel you need, the cateye is the way to go. But to me, it still sounds like unnecessary complication and cost for marginal benefit.. But hey, good to know that there is a quality wireless on the market for those who need it.
peace, sam |
This thread is very informative. I have been thinking of switching to wireless for sometime and got pretty much everything about wireless, cons and pros.
If the cost of replacement battery is stopping you from switching to wireless, here's a site selling them very cheap. http://www.batteryspace.com/index.as...tSearch=CR2032 5 pieces for $1.95 50 pieces for $14.95 (shipping cost, $5.47 either way) |
What wireless units do cadence?
|
Originally Posted by phidauex
Well it sounds like if wireless is something you feel you need, the cateye is the way to go. But to me, it still sounds like unnecessary complication and cost for marginal benefit.. But hey, good to know that there is a quality wireless on the market for those who need it.
peace, sam |
Originally Posted by Trekke
Really is not near as complicated as maintaining the wire between the pickup and computer input. :)
|
Originally Posted by Wurm
That's what I was going to say. Actually, what could be simpler - the main unit, the sensor, the magnet - that's it. No wires. ;)
|
I find too much wireless stuff starts to interfere with each other (gps and xm radio cancel out each other's signals and sometime effect the hrm) Go wired.
|
Originally Posted by Wurm
That's what I was going to say. Actually, what could be simpler - the main unit, the sensor, the magnet - that's it. No wires. ;)
But with a wired unit you save original purchase and not risks the chance of interference problems were you will constanly get stressed over until you buy a new computer even more money. All to save a one time 5 minutes of install, if takes longer than that you should have your LBS do it for you. |
Originally Posted by Trekke
Exactly. Think of it in non bike terms such as the wireless phone in your home, your cell phone, remote control. Wireless makes life much less complicated. That applies to biking too. :)
|
Originally Posted by clausen
So what your saying is wireless is so much simpler.
But with a wired unit you save original purchase and not risks the chance of interference problems were you will constanly get stressed over until you buy a new computer even more money. All to save a one time 5 minutes of install, if takes longer than that you should have your LBS do it for you. If the Micro WAS having the same old problems as other wireless units I've had in the past I would have said so, and I wouldn't be using it now. But it really is an awesome cyclo-comp, so it's staying on my rig until/unless it isn't. |
Originally Posted by Wurm
And how many times to I have to repeat the fact that the new Cateye Micro's DO NOT GET INTERFERENCE? You can believe that or not, but it has honestly been my experience with the unit thus far.
|
Originally Posted by Waxbytes
I can believe that your Cateye does not get interference in your application. I can also believe that it could get interference in some else's application. A sample of one is not conclusive. Your honesty is not in question.
Lol go Waxbytes. Owned. |
Originally Posted by Waxbytes
I can believe that your Cateye does not get interference in your application. I can also believe that it could get interference in some else's application. A sample of one is not conclusive. Your honesty is not in question.
So what have you got to lose by trying it? I think the hype against wireless units is much overdone. Anyway, I've got mine and I'm totally happy with it. You can have your steenk-ing wires! ;) |
Originally Posted by operator
Weather proofness depends on if the person took the time to ensure the seals were correct and how the unit was designed in the first place, result: answers will vary.
I'll agree with the no go with the wireless. I'd trade mine for a wired right now. Freaking interference. At least I know now whether or not the traffic lights detected me by looking at the comp and seeing if it's spiking 99kph until I move off. |
Originally Posted by Waxbytes
I can believe that your Cateye does not get interference in your application. I can also believe that it could get interference in some else's application. A sample of one is not conclusive. Your honesty is not in question.
Nor is a month of ownership a good samping either. |
Originally Posted by 2manybikes
Nor is a month of ownership a good samping either.
I suppose with certain people nothing is ever 'good enough', even if it's flawless. |
Originally Posted by clausen
And when the power goes out you have no phone. Now thats less complicated.
|
Originally Posted by Wurm
But it really is an awesome cyclo-comp, so it's staying on my rig until/unless it isn't.
|
Originally Posted by genec
What wireless units do cadence?
|
Originally Posted by genec
What wireless units do cadence?
Manual is quite complicated (could to with a "quick sheet setup"), and it took me a few days to understand all the functions. (not sure though if I do today :o ) On the first ride, the dist stayed locked on ~41 miles for an unknown reason, I suspect I may have hit the "lap" button by mistake, or there was an interference. It has worked fine since. Easy installation, quite complex set up. Handlebar bracket is "OK", design could be improved. Transmiter fits on LH chainstay with two straps, that is also something Cat Eye should improve. |
I have a wired on my MTB and a wireless on my roadie.
Now, on my MTB, the wire is trailed very neatly around the front brake cable, which is all good untill you get crap on it which is every ride, and then it just takes forever to clean off. On my roadie, as you can see from the pics on the link in my signature, the installation is clean and does not spoil the look of the bike - very important for us roadies!!! As for functionality, my Flightdeck has all that I need. It has a cadence function which can be set as the main display instead of speed, along with all sorts of other goodies including a lap counter, gear display, momentary display of gear ratios after a shift etc. which are all controlled from the tiny knobbles on the STIs - very handy. So, I would recommend a wireless Flightdeck for a roadie - doesn't seem to mind getting wet, hot or cold and the batteries last fine too. |
Originally Posted by Matt Gaunt
On my roadie, as you can see from the pics on the link in my signature, the installation is clean and does not spoil the look of the bike - very important for us roadies!!!
|
I have two Cateye wired and a Vetta 100 wireless. They all work great. I love the Vetta (with cadence) and am about to get one for my TT bike.
|
On my roadie, as you can see from the pics on the link in my signature, the installation is clean and does not spoil the look of the bike - very important for us roadies!!! And to whoever said, 'maintaining the wire', I'd like to know what is actually required to maintain a wire. It doesn't need adjustment, or lubrication. It doesn't need its bolts tightened, and it doesn't need to be clean. Its just a wire, very simple. :) peace, sam |
| All times are GMT -6. The time now is 01:01 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.