Go Back  Bike Forums > Bike Forums > General Cycling Discussion
Reload this Page >

Help.. me with this Kryptonite lock

Notices
General Cycling Discussion Have a cycling related question or comment that doesn't fit in one of the other specialty forums? Drop on in and post in here! When possible, please select the forum above that most fits your post!

Help.. me with this Kryptonite lock

Old 06-08-05, 08:37 PM
  #1  
Junior Member
Thread Starter
 
Join Date: May 2005
Posts: 8
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Help.. me with this Kryptonite lock

I'm a big silly newbie and I'm not sure how to properly use this lock that I bought with my bike a few weeks ago:



I cannot locate the instruction (if it ever came with it) and I usually just use the u-lock through my front wheel.. but i just don't understand how the cable is supposed to give added security; if someone cuts through your lock the cable becomes loose; what's the point?

I'm just a big worrywort because I've already got my bikes stolen twice :S

thx
let down is offline  
Old 06-08-05, 08:43 PM
  #2  
Banned
 
Join Date: Mar 2004
Location: under bridge in cardboard box
Posts: 5,402
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 8 Post(s)
Liked 501 Times in 397 Posts
Run cable thru front wheel and then thru the lock, it may even be long enough to get both wheels,cant tell from the pic.Fact is, if someone wants your bike,they will take it.Often the best prevention is the bike itself and not just the lock.
pedex is offline  
Old 06-08-05, 08:53 PM
  #3  
Chairman of the Bored
 
catatonic's Avatar
 
Join Date: May 2004
Location: St. Petersburg, FL
Posts: 5,825

Bikes: 2004 Raleigh Talus, 2001 Motobecane Vent Noir (Custom build for heavy riders)

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 2 Times in 2 Posts
The cable is to secure your front wheel/bottle cages/etc. While the U-lock locks down your rear wheel and frame. Keep in mind a U-lock is pretty tough to cut through....a grinder can do it, but few thieves are that brazen. Most thieves will carry cable cutters though...however few will worry about cutting a thick cable over a front wheel.
catatonic is offline  
Old 06-08-05, 11:24 PM
  #4  
Member
 
Join Date: Jan 2005
Location: Southern California
Posts: 29

Bikes: Surly Crosscheck

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
If you put the U-lock through your front wheel, someone can detach the wheel and take the rest of your bike. So why would you do such a silly thing?

Secondly, the cable is much easier to cut through than the lock. If someone has cut through the lock then they have your bike, so why would you care that the cable has come free at that point?

What you do is use the U-lock to fasten your back wheel to some solid post, putting the U-lock inside the rear triangle of the frame. That protects both the wheel and the frame, since the back wheel can't be separated from the frame while the lock is attached. You then run the cable round the front wheel and fasten it to the U-lock, so that both wheels are protected. (You could of course put the U-lock around both the back wheel and the frame if it is big enough, in case someone tries to cut through the wheel.)
IanB is offline  
Old 06-09-05, 12:03 AM
  #5  
I drink your MILKSHAKE
 
Raiyn's Avatar
 
Join Date: Jul 2002
Location: St. Petersburg, FL
Posts: 15,061

Bikes: 2003 Specialized Rockhopper FSR Comp, 1999 Specialized Hardrock Comp FS, 1971 Schwinn Varsity

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 3 Times in 3 Posts
Originally Posted by let down
I'm a big silly newbie and I'm not sure how to properly use this lock that I bought with my bike a few weeks ago:

[IMGdisabled]https://www.kryptonitelock.com/articles/3082/110538_kl-std-flx2.gif[/IMG]

I cannot locate the instruction (if it ever came with it) and I usually just use the u-lock through my front wheel.. but i just don't understand how the cable is supposed to give added security; if someone cuts through your lock the cable becomes loose; what's the point?

I'm just a big worrywort because I've already got my bikes stolen twice :S
Gee I wonder why? Only locking the front wheel
Read and learn

https://www.sheldonbrown.com/lock-strategy.html
__________________
Raiyn is offline  
Old 06-09-05, 02:12 PM
  #6  
Senior Member
 
Join Date: Oct 2004
Posts: 5,250
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 7 Times in 7 Posts
Originally Posted by IanB
...What you do is use the U-lock to fasten your back wheel to some solid post, putting the U-lock inside the rear triangle of the frame. That protects both the wheel and the frame, since the back wheel can't be separated from the frame while the lock is attached. You then run the cable round the front wheel and fasten it to the U-lock, so that both wheels are protected....
This is the RIGHT way to do it. Oddly enough, the directions that come with bike locks do NOT make this clear. Likewise, there are many bike racks being sold (especially to schools) that make it impossible to correctly use a U-lock. I see bikes attached to "schoolyard" racks ONLY by the front wheel...which often have a quick release. Yikes.
alanbikehouston is offline  
Old 06-09-05, 05:20 PM
  #7  
You need a new bike
 
supcom's Avatar
 
Join Date: Aug 2002
Posts: 5,433
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Likes: 0
Liked 4 Times in 3 Posts
It may be the right way, but it's not the best way. Best is to remove the front wheel and enclose the rim within the U-Lock along with the rear wheel. This provides the maximum protection for the more expensive components. It also takes up the maximum space in the U-Lock so it's harder to use a leverage attack on it. Run the cable up through the seat rails and secure it to the U-lock.

Either that, or leave the cable at home and just use the U-Lock for the wheels as described.
supcom is offline  
Old 06-09-05, 09:54 PM
  #8  
Senior Member
 
Join Date: Oct 2004
Posts: 5,250
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 7 Times in 7 Posts
Originally Posted by supcom
It may be the right way, but it's not the best way. Best is to remove the front wheel and enclose the rim within the U-Lock along with the rear wheel. This provides the maximum protection for the more expensive components. It also takes up the maximum space in the U-Lock so it's harder to use a leverage attack on it. Run the cable up through the seat rails and secure it to the U-lock.
Not ten percent of the bikes that I see at local colleges are locked correctly. Folks will only lock their bikes CORRECTLY on a consistent basis if they are taught techniques that are fast, easy, and idiot-proof.

Locking the front wheel to the rear wheel is time consuming. Putting the front wheel back on is time consuming. And, some folks have trouble getting the front wheel back on with the rim correctly centered between the brake pads, and remembering the close the brakes back to the proper position. And, a few people have been injured over the years, because they failed to correctly close the quick release after remounting the front wheel. Taking the front wheel off is an unnecessary waste of time and effort when better, faster methods are available.

Those extra long U-locks that are long enough to go around two mountain bike wheels, plus a locking post leave way too much room for a crook's prying and leverage tools. Extra long U-locks are a crook's best friend. A mini U-lock around the rear wheel ONLY leaves no room for leverage tools. Even a $30 OnGuard Mini U-lock is "immune" to leverage attacks.

I live and ride in a "high crime" neighborhood in Houston, the "crime capital" of Texas. I replace the quick release on my front wheels with a bolt. And, at night, or when my bike will be out of my sight for more than a few minutes, I loop a cable through the front wheel. About five seconds on or off. Likewise, the mini U-lock around the rear wheel also takes just five seconds on or off. A mini U-lock around the front wheel and a cable around the front wheel fully protects the bike and both wheels. And, using this method correctly can be done in just ten or fifteen seconds with a little practice.
alanbikehouston is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.