Helmet/glasses mirrors, please separate the good stuff from the junk...
Who's wearing them (or not) and what do you wear? Seems like a lot of choices out there...hard to know what works and what is junk.
|
Safety glasses = Uvex.
|
Mirror: glasses mounted "Take-a-look"
|
Originally Posted by JohnDThompson
(Post 20499968)
Mirror: glasses mounted "Take-a-look"
|
"Take-a-look" taped to helmet.
|
I bought the take a look and Zefal Spin at the same time. In the end I use the Zefal Spin. The take a look probably I need to use it longer to acclimate to it. Just felt weird.:p |
If you can get used to a helmet or glasses-mounted mirror, they are best option, IMO. I never could, though. I tried a Take-A-Look for a couple weeks and I just found it really distracting and kind of gave me a headache. As far as bar-mounted mirrors on drop bars, I’ve tried a few, some that mount on the ends of the drops, one that attached to the hoods. They all have significant drawbacks, though. So give a Take-A-Look a try first. even if you don’t like it for riding, I found it useful for looking inside my guitar and upright bass. |
I prefer not to have metal wire located near my eyes so I use ..... https://www.amazon.com/CycleAware-He.../dp/B000UVCP52
I install it upside down which elevates the mirror a bit providing an excellent rear view while keeping the eye level sight line clear. |
Originally Posted by johndthompson
(Post 20499968)
mirror: Glasses mounted "take-a-look"
|
Originally Posted by maelochs
(Post 20500249)
end of that portion of the discussion if you wear glasses and want a mirror. Simply nothing better.
|
Originally Posted by OldTryGuy
(Post 20500346)
I prefer not to have metal wire located near my eyes so I use ..... https://www.amazon.com/CycleAware-He.../dp/B000UVCP52
I install it upside down which elevates the mirror a bit providing an excellent rear view while keeping the eye level sight line clear. + 3/4 |
Originally Posted by BobbyG
(Post 20500353)
I have used that prior to the Take-A-Look. Functionally identical, but the Take-A-Look holds the mirror in position better. However the Cycle Aware is still terrific, and was a revelation (pun intended) after using only handle-bar mounted mirrors.
+ 3/4 |
Originally Posted by OldTryGuy
(Post 20500364)
Did you ever flip the mirror? Makes a world of difference for me compared to standard mounting. YES, the T-A-Look is EXCELLENT!!!
|
Originally Posted by sail
(Post 20500263)
"Take-a-look" taped to helmet.
Originally Posted by OldTryGuy
(Post 20500346)
I prefer not to have metal wire located near my eyes so I use ..... https://www.amazon.com/CycleAware-Heads-eyewear-mounted-mirror/dp/B000UVCP52
I install it upside down which elevates the mirror a bit providing an excellent rear view while keeping the eye level sight line clear. |
Originally Posted by DanBraden
(Post 20500495)
Ah! This is what I've been needing to do... I've got it attached to my visor which has been great except that the mounting plugs are starting to shear off...
|
Originally Posted by sail
(Post 20500540)
It's actually clipped on the visor with tape as. Maybe you need this:https://www.ebay.com/itm/Bike-Peddle...sid=m570.l1313
|
|
i have tried two kinds of helmet/glasses mirrors. One attached to the helmet, the other to a pair of glasses. As noted above, niether worked out for me, but the one that mounted to the glassss worked a whole lot better. The problem I had with the helmet mounted one is that is that it shook around a lot when I hit bumps. It was utterly useless on my visor, attaching it to the helmet shell helped, but was still an issue. Attached to my glassed was much more stable in the rough. |
Originally Posted by JohnDThompson
(Post 20499968)
Mirror: glasses mounted "Take-a-look"
|
https://www.efficientvelo.com/home/safezone/ big , solidly helmet mounted..
|
Take-A-Look, ditto.
I have the long stem version rigged to one helmet. And a short stem version for my various glasses -- easy to swap between glasses. I rigged up my own helmet mount from an unused stiff bit of plastic (grocery store discount card), cut to fit a niche just inside the helmet. Added a couple of small holes. The Take-A-Look is attached and zip tied to the card, through one of the little holes I punched in the card. Then the card is zipped tied to the helmet, again through a hole punched in the card. Neat, durable, adjustable and can be redone anytime without adhesive mess. When I first tried the Take-A-Look a couple of years ago I hated it. Felt completely non-intuitive and disorienting. So I wore it to get used to it gradually while continuing to rely on my handlebar mirror on my hybrid. Took about a month but I finally came to prefer the Take-A-Look. And I don't have a mirror on my road bike, so I rely on the helmet or glasses mirror. Positioning is critical to making a helmet or glasses mirror easy to use. If it's too far inboard the view will be blocked by your own head and you'll need to turn your head too much to see anything. If it's too far outboard you'll feel some eye strain from looking so far over. When it's within an ideal position range it's more intuitive, and you can often see movement behind you without actually looking at the mirror. |
Originally Posted by canklecat
(Post 20501104)
Take-A-Look, ditto.
I have the long stem version rigged to one helmet. And a short stem version for my various glasses -- easy to swap between glasses. I rigged up my own helmet mount from an unused stiff bit of plastic (grocery store discount card), cut to fit a niche just inside the helmet. Added a couple of small holes. The Take-A-Look is attached and zip tied to the card, through one of the little holes I punched in the card. Then the card is zipped tied to the helmet, again through a hole punched in the card. Neat, durable, adjustable and can be redone anytime without adhesive mess. When I first tried the Take-A-Look a couple of years ago I hated it. Felt completely non-intuitive and disorienting. So I wore it to get used to it gradually while continuing to rely on my handlebar mirror on my hybrid. Took about a month but I finally came to prefer the Take-A-Look. And I don't have a mirror on my road bike, so I rely on the helmet or glasses mirror. Positioning is critical to making a helmet or glasses mirror easy to use. If it's too far inboard the view will be blocked by your own head and you'll need to turn your head too much to see anything. If it's too far outboard you'll feel some eye strain from looking so far over. When it's within an ideal position range it's more intuitive, and you can often see movement behind you without actually looking at the mirror. |
Originally Posted by sail
(Post 20500263)
"Take-a-look" taped to helmet.
I like the 3rd Eye mirrors, the Hard Shell Helmet ones except the clamp was a poor fit to the Bell helmets I used to wear so I made a fiberglass bracket for it to clamp onto. Bracket mounts with two small hardware screws onto the visor. Totally first class. Puts the mirror right where it should be and is rock solid. The brackets last several helmets. I pop the visor and mirror off to wash the helmet. And my bug - this works so well that it brings up an issue - why cannot the helmet and mirror manufacturers come up with some sort of standard that would make mounting mirrors as easy and good as my system. The brackets I make would cost far less than $1 for any kind of production run. (I've been using them for about a decade now. On my third one. The prototype, a better one, then a move to another, rather different helmet. Ben |
Originally Posted by canklecat
(Post 20501104)
...
Positioning is critical to making a helmet or glasses mirror easy to use. If it's too far inboard the view will be blocked by your own head and you'll need to turn your head too much to see anything. If it's too far outboard you'll feel some eye strain from looking so far over. When it's within an ideal position range it's more intuitive, and you can often see movement behind you without actually looking at the mirror. Ben |
Originally Posted by DanBraden
(Post 20501111)
I'd be interested in trying this, do you have a pic?
https://cimg6.ibsrv.net/gimg/bikefor...fba9da1b31.jpg Take-A-Look mirror zip tied to trimmed card (black zip tie). https://cimg5.ibsrv.net/gimg/bikefor...14cd24679a.jpg Card zip tied to helmet. |
All times are GMT -6. The time now is 12:04 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.