Bike rack
#1
Newbie
Thread Starter
Bike rack
Any recommendation on bike rack?,, hitch fit for my pickup,, both mens and womens bikes.
THANKS
THANKS
#2
Senior Member
Join Date: Sep 2017
Posts: 7,253
Mentioned: 35 Post(s)
Tagged: 0 Thread(s)
Quoted: 6495 Post(s)
Liked 10,141 Times
in
4,344 Posts
If you read up, you'll find that the top three choices are the cradle-style hitch-mounted racks from Thule (T2 pro xt2, I think it's called), Kuat Sherpa 2.0, and the 1up models.
They are all relatively costly, and pretty great. I've got the Thule, and no complaints.
They are all relatively costly, and pretty great. I've got the Thule, and no complaints.
Likes For Koyote:
#3
Member
I have a Kuat NV Base 2.0, went with it over the Sherpa since you can add an attachment to make it a 4-bike rack.
I like it, it is slick to load a variety of styles/sizes of bikes. The one knock on it I saw when purchasing was that some of the components are plastic and may not last in the sun after a few years, but it sounds like they have good customer service to help with that. If you want the most robust option, everyone raves about the 1up, but I couldn't pony up for that at the time.
As Koyote said, any of the top models people mention are pretty great. One that wasn't mentioned was Rocky Mounts. I was intrigued by them when I was buying a rack, as they looked slick and were slightly cheaper than others, but unfortunately that meant I couldn't find one in stock anywhere!
I like it, it is slick to load a variety of styles/sizes of bikes. The one knock on it I saw when purchasing was that some of the components are plastic and may not last in the sun after a few years, but it sounds like they have good customer service to help with that. If you want the most robust option, everyone raves about the 1up, but I couldn't pony up for that at the time.
As Koyote said, any of the top models people mention are pretty great. One that wasn't mentioned was Rocky Mounts. I was intrigued by them when I was buying a rack, as they looked slick and were slightly cheaper than others, but unfortunately that meant I couldn't find one in stock anywhere!
#4
Senior Member
Join Date: Sep 2017
Posts: 7,253
Mentioned: 35 Post(s)
Tagged: 0 Thread(s)
Quoted: 6495 Post(s)
Liked 10,141 Times
in
4,344 Posts
I have a Kuat NV Base 2.0, went with it over the Sherpa since you can add an attachment to make it a 4-bike rack.
I like it, it is slick to load a variety of styles/sizes of bikes. The one knock on it I saw when purchasing was that some of the components are plastic and may not last in the sun after a few years, but it sounds like they have good customer service to help with that. If you want the most robust option, everyone raves about the 1up, but I couldn't pony up for that at the time.
As Koyote said, any of the top models people mention are pretty great. One that wasn't mentioned was Rocky Mounts. I was intrigued by them when I was buying a rack, as they looked slick and were slightly cheaper than others, but unfortunately that meant I couldn't find one in stock anywhere!
I like it, it is slick to load a variety of styles/sizes of bikes. The one knock on it I saw when purchasing was that some of the components are plastic and may not last in the sun after a few years, but it sounds like they have good customer service to help with that. If you want the most robust option, everyone raves about the 1up, but I couldn't pony up for that at the time.
As Koyote said, any of the top models people mention are pretty great. One that wasn't mentioned was Rocky Mounts. I was intrigued by them when I was buying a rack, as they looked slick and were slightly cheaper than others, but unfortunately that meant I couldn't find one in stock anywhere!
Your Kuat is pricey, but I believe it now comes standard with the built-in workstand attachment. I wouldn't see myself using that often, but it would be handy feature occasionally, I imagine.
To the OP: I spent years schlepping my bikes inside my vehicle; bought a rack this past spring, and within a month I was wishing I had done it years ago.
#5
Full Member
I am cheap so I went with:
https://allen.bike/collections/hitch-racks
https://allen.bike/collections/hitch-racks
Likes For themp:
#8
Happy banana slug
Join Date: Sep 2015
Location: Arcata, California, U.S., North America, Earth, Saggitarius Arm, Milky Way
Posts: 3,553
Bikes: 1984 Araya MB 261, 1992 Specialized Rockhopper Sport, 1993 Hard Rock Ultra, 1994 Trek Multitrack 750, 1995 Trek Singletrack 930
Mentioned: 30 Post(s)
Tagged: 0 Thread(s)
Quoted: 1418 Post(s)
Liked 1,384 Times
in
821 Posts
#9
Senior Member
Join Date: Sep 2017
Posts: 7,253
Mentioned: 35 Post(s)
Tagged: 0 Thread(s)
Quoted: 6495 Post(s)
Liked 10,141 Times
in
4,344 Posts
Likes For Koyote:
Likes For Paul Barnard:
#11
Zip tie Karen
Join Date: Aug 2009
Location: Fair Oaks Ranch, TX
Posts: 7,006
Bikes: '13 Motobecane Fantom29 HT, '16 Motobecane Turino Pro Disc, '18 Velobuild VB-R-022, '21 Tsunami SNM-100
Mentioned: 26 Post(s)
Tagged: 0 Thread(s)
Quoted: 1464 Post(s)
Liked 1,539 Times
in
805 Posts
I'm a fan of tray-type carriers, as they can adapt to many different styles of bicycles. However, I don't use one anymore, I prefer the Saris Bones style of ratcheting clamps, especially with a third clamp for the seat tube.

#12
Advanced Slacker
Join Date: Feb 2017
Posts: 6,036
Bikes: Soma Fog Cutter, Surly Wednesday, Canfielld Tilt
Mentioned: 26 Post(s)
Tagged: 0 Thread(s)
Quoted: 2681 Post(s)
Liked 2,421 Times
in
1,365 Posts
This^^*^
Doable, but a bit of a hassle to reconfigure the arms for them, and I still need to strap down the rear wheel. I only transport fendered bikes a couple times a year, so it is not so bad, but if a fendered bike was in my regular rotation, I’d get a different rack for sure.
Doable, but a bit of a hassle to reconfigure the arms for them, and I still need to strap down the rear wheel. I only transport fendered bikes a couple times a year, so it is not so bad, but if a fendered bike was in my regular rotation, I’d get a different rack for sure.
#13
Advanced Slacker
Join Date: Feb 2017
Posts: 6,036
Bikes: Soma Fog Cutter, Surly Wednesday, Canfielld Tilt
Mentioned: 26 Post(s)
Tagged: 0 Thread(s)
Quoted: 2681 Post(s)
Liked 2,421 Times
in
1,365 Posts
What you are showing here is the biggest selling point of the rack for me:
With a single tray mounted, when not in use, it can fold up against the bumper and be completely out of the way of the rear hatch.
So much attention is given to how rasy a rack is when loading and unloading. But what makes a bigger difference to me is how convenient is it all of the time I DON’T have bikes on the rack.
With a single tray mounted, when not in use, it can fold up against the bumper and be completely out of the way of the rear hatch.
So much attention is given to how rasy a rack is when loading and unloading. But what makes a bigger difference to me is how convenient is it all of the time I DON’T have bikes on the rack.
#14
Senior Member
Join Date: Sep 2017
Posts: 7,253
Mentioned: 35 Post(s)
Tagged: 0 Thread(s)
Quoted: 6495 Post(s)
Liked 10,141 Times
in
4,344 Posts
This^^*^
Doable, but a bit of a hassle to reconfigure the arms for them, and I still need to strap down the rear wheel. I only transport fendered bikes a couple times a year, so it is not so bad, but if a fendered bike was in my regular rotation, I’d get a different rack for sure.
Doable, but a bit of a hassle to reconfigure the arms for them, and I still need to strap down the rear wheel. I only transport fendered bikes a couple times a year, so it is not so bad, but if a fendered bike was in my regular rotation, I’d get a different rack for sure.
Still, if I transported fendered bikes a lot, I would have an entirely different type of rack.
Edited to add: Kapusta does identify a huge advantage of the 1up rack. I do get tired of swinging my Thule rack downward to open the rear hatch on my SUV. On the other hand, since getting the rack, I've not gotten a single bill in the mail from our turnpike system -- the camera can't read my rear license plate with the rack in the way, and we don't have front plates. So, that's an advantage. If I drive the turnpike enough, this rack will pay for itself eventually.

Last edited by Koyote; 12-05-20 at 01:12 PM.
#15
Full Member
Join Date: Jul 2019
Location: Greer, SC
Posts: 344
Bikes: GR300, Grail, Live Wire, 5010
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 189 Post(s)
Liked 241 Times
in
121 Posts
...On the other hand, since getting the rack, I've not gotten a single bill in the mail from our turnpike system -- the camera can't read my rear license plate with the rack in the way, and we don't have front plates. So, that's an advantage. If I drive the turnpike enough, this rack will pay for itself eventually. 


#16
Senior Member
Join Date: Aug 2007
Posts: 2,586
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 604 Post(s)
Liked 342 Times
in
220 Posts
The rack I needed had to be able to carry bikes with front baskets and a carbon fiber bike which preclude front wheel clamping systems and frame clamping systems. The Thule fits my needs perfectly.


#17
Advanced Slacker
Join Date: Feb 2017
Posts: 6,036
Bikes: Soma Fog Cutter, Surly Wednesday, Canfielld Tilt
Mentioned: 26 Post(s)
Tagged: 0 Thread(s)
Quoted: 2681 Post(s)
Liked 2,421 Times
in
1,365 Posts
As long as you don't have fenders the Thule Helium Platform 2 is another option. It is a copy of the 1UP but it is cheaper, lighter and available. It takes less than thirty seconds to load a bike. I have been using mine for about a month and so far I have no regrets.
The rack I needed had to be able to carry bikes with front baskets and a carbon fiber bike which preclude front wheel clamping systems and frame clamping systems. The Thule fits my needs perfectly.


The rack I needed had to be able to carry bikes with front baskets and a carbon fiber bike which preclude front wheel clamping systems and frame clamping systems. The Thule fits my needs perfectly.


#20
Senior Member
Join Date: Sep 2017
Posts: 7,253
Mentioned: 35 Post(s)
Tagged: 0 Thread(s)
Quoted: 6495 Post(s)
Liked 10,141 Times
in
4,344 Posts
Likes For Koyote:
#21
-------
Join Date: Jul 2020
Location: Tejas
Posts: 10,785
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 8127 Post(s)
Liked 5,275 Times
in
2,890 Posts
I’ve been happy with the Kuat Transport 2. Less expensive, and very solid. Does not touch the frames of the bikes just like others mentioned. A bit more compact for storage when not in use. Lighter than the bigger Kuat and Thule racks, so easier to handle when off the vehicle.
#22
For The Fun of It
Join Date: May 2007
Location: Louisissippi Coast
Posts: 5,760
Bikes: Lynskey GR300, Lynskey Backroad, Litespeed T6, Lynskey MT29, Burley Duet
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 2079 Post(s)
Liked 1,562 Times
in
785 Posts
This is what I use for my truck. https://www.swagman.net/product.htm?...8211&cat=40495
#23
SE Wis
Join Date: Apr 2005
Location: Milwaukee, WI
Posts: 10,056
Bikes: '68 Raleigh Sprite, '02 Raleigh C500, '84 Raleigh Gran Prix, '91 Trek 400, 2013 Novara Randonee, 1990 Trek 970
Mentioned: 39 Post(s)
Tagged: 0 Thread(s)
Quoted: 2542 Post(s)
Liked 3,018 Times
in
1,832 Posts
#24
For The Fun of It
Join Date: May 2007
Location: Louisissippi Coast
Posts: 5,760
Bikes: Lynskey GR300, Lynskey Backroad, Litespeed T6, Lynskey MT29, Burley Duet
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 2079 Post(s)
Liked 1,562 Times
in
785 Posts
I have transported my bikes with a bed full of assorted gear and junk. The back wheel of the bicycle rests nicely atop anything from suitcases, to ice chests, to bags of garbage from the camp. There is no way I am using my bikes for a bumper when there are better options. Bikes can even be carried on top of a tonneau cover with a fork block and something simple to immobilize the back wheel. I think we are talking to ourselves though. The OP seems to be yet another low post noob who starts a discussion and stays out of it.
#25
On Your Left
Join Date: Nov 2011
Location: Long Island, New York, USA
Posts: 8,373
Bikes: Trek Emonda SLR, Sram eTap, Zipp 303
Mentioned: 34 Post(s)
Tagged: 0 Thread(s)
Quoted: 3004 Post(s)
Liked 2,432 Times
in
1,186 Posts
I've seen pickups with a bar that spans side to side of the bed with quick release stations. You remove the front wheels and clip the bike in to each station.. That way nothing is hanging past the bumper.
Sort of like a roof rack, but in the bed.
Sort of like a roof rack, but in the bed.
