Go Back  Bike Forums > Bike Forums > General Cycling Discussion
Reload this Page >

How practical is it to have multiple sets of wheels for the same bike?

Notices
General Cycling Discussion Have a cycling related question or comment that doesn't fit in one of the other specialty forums? Drop on in and post in here! When possible, please select the forum above that most fits your post!

How practical is it to have multiple sets of wheels for the same bike?

Old 05-09-22, 03:00 PM
  #1  
Herzlos
Full Member
Thread Starter
 
Join Date: Sep 2020
Location: Scotland
Posts: 273

Bikes: Gravel, MTB

Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 466 Post(s)
Liked 375 Times in 209 Posts
How practical is it to have multiple sets of wheels for the same bike?

Not wanting to have more bikes, I'm considering getting additional sets of wheels to cover different purposes (so the gravel bike with road and gravel tires, mountain bike with wet and dry tires). I've heard indications that I'm likely to need to have to tweak the rear derailleur when changing between wheels, is that the case?

Would I be better getting exactly the same wheels for both pairs, with the same cassette and discs, or will I be able to get away with swapping between the stock wheels and some upgraded ones?
Herzlos is offline  
Old 05-09-22, 03:12 PM
  #2  
caloso
Senior Member
 
caloso's Avatar
 
Join Date: Jul 2002
Location: Sacramento, California, USA
Posts: 40,730

Bikes: Specialized Tarmac, Canyon Exceed, Specialized Transition, Ellsworth Roots, Ridley Excalibur

Mentioned: 68 Post(s)
Tagged: 0 Thread(s)
Quoted: 2890 Post(s)
Liked 2,914 Times in 1,340 Posts
It makes a lot of sense, especially if you're dealing with tubeless. My son and I share 4 sets of wheels between our 2 CX bikes. Different treads and widths for the conditions, but same cassettes makes that part simple. We've been lucky that we haven't had to do any futzing with the RD. As for discs, I don't know. These are rim brake wheels.
caloso is offline  
Likes For caloso:
Old 05-09-22, 03:18 PM
  #3  
CliffordK
Senior Member
 
CliffordK's Avatar
 
Join Date: Nov 2014
Location: Eugene, Oregon, USA
Posts: 26,894
Mentioned: 213 Post(s)
Tagged: 0 Thread(s)
Quoted: 15922 Post(s)
Liked 3,269 Times in 2,431 Posts
I've always liked to double check the derailleur adjustment when swapping wheels.

However, if you have the same brand/model of hubs and cassettes, then the changeover should be easy enough. The size of the sprockets shouldn't make a huge difference as long as your chain works with the largest cassette.

If you have tire clearance, and have DISC brakes, then you may be able to use both 650b and 700c on the same bike.
CliffordK is online now  
Likes For CliffordK:
Old 05-09-22, 03:31 PM
  #4  
Herzlos
Full Member
Thread Starter
 
Join Date: Sep 2020
Location: Scotland
Posts: 273

Bikes: Gravel, MTB

Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 466 Post(s)
Liked 375 Times in 209 Posts
I hadn't actually considered changing down to 650b but that's actually a great idea. That means I can potentiall run 700x32c and 650x50c on the same bike
Both bikes are tubeless, which is part of why I was considering it. I don't mind changing tubed tires over since it only takes a few minutes, but I don't fancy having to deal with sealant every time I change tires.
Herzlos is offline  
Likes For Herzlos:
Old 05-09-22, 03:36 PM
  #5  
wolfchild
Senior Member
 
wolfchild's Avatar
 
Join Date: Feb 2008
Location: Mississauga/Toronto, Ontario canada
Posts: 7,508

Bikes: I have 3 singlespeed/fixed gear bikes

Mentioned: 22 Post(s)
Tagged: 0 Thread(s)
Quoted: 2887 Post(s)
Liked 1,642 Times in 803 Posts
Personally I have 6 pairs of wheels, but all of my bikes are also singlespeed and fixed gear so it makes it a little easier to swap wheels.
wolfchild is offline  
Old 05-09-22, 03:40 PM
  #6  
Paul Barnard
For The Fun of It
 
Join Date: May 2007
Location: Louisissippi Coast
Posts: 5,342

Bikes: Lynskey GR300, Lynskey Backroad, Litespeed T6, Lynskey MT29, Burley Duet

Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 1826 Post(s)
Liked 1,147 Times in 593 Posts
I have two sets of wheels for my touring/commuter bike. Swapping them out requires no adjustment. I am very likely to get a second set for my gravel bike.
Paul Barnard is offline  
Old 05-09-22, 03:55 PM
  #7  
DMC707
Banned.
 
Join Date: Jan 2013
Location: Norman, Oklahoma
Posts: 5,024

Bikes: Too many to list

Mentioned: 36 Post(s)
Tagged: 0 Thread(s)
Quoted: 1606 Post(s)
Liked 873 Times in 587 Posts
This is done all the time if you race --- might have a set of wheels for different conditions plus a set of time trial wheels

TT wheels will have a tighter cassette generally but normally not much to ever have to fuss over. I used to race track - ditto there - had multiple sets of wheels. Spoked trainers, race wheels, discs, 3 spokes, 5 spokes etc etc


I have a burly set of Enduro spec wheels on my mountain bike for durability reasons , but id like to try a speedier set of XC wheels --- seems like the same principle - just have to have the same size disc rotors, rear spacing and a cassette in a similar dimension to your current one --- a chain and rear derailleur optimized to run with a 11-46 might not play nice with a 10-51 for instance

But alas , in the end it seems like a lot to futz with so i havent done it
DMC707 is offline  
Old 05-09-22, 03:56 PM
  #8  
Kedosto
Callipygian Connoisseur
 
Join Date: Nov 2008
Posts: 1,383
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 563 Post(s)
Liked 347 Times in 189 Posts
Originally Posted by Herzlos View Post
I can potentiall run 700x32c and 650x50c on the same bike
I run 700x28c and 650bx47c on the same bike. The tire/wheel combo is the same circumference, so I donít even have to make any changes to the speedo/odometer settings. For optimum performance youíll probably be running different sized cassettes for each wheelset. I just adjusted the b screw to split the difference and have never had an issue.
Kedosto is offline  
Old 05-09-22, 05:19 PM
  #9  
cyclist2000
Senior Member
 
cyclist2000's Avatar
 
Join Date: Sep 2009
Location: Up
Posts: 4,628

Bikes: Masi, Giant TCR, Eisentraut (retired), Jamis Aurora Elite, Zullo, Cannondale, 84 & 93 Stumpjumpers, Waterford, Tern D8, Bianchi, Gunner Roadie, Serotta, and looking for a Brompton M6R or T-line

Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 295 Post(s)
Liked 1,866 Times in 549 Posts
Originally Posted by Herzlos View Post
I hadn't actually considered changing down to 650b but that's actually a great idea. That means I can potentiall run 700x32c and 650x50c on the same bike
Both bikes are tubeless, which is part of why I was considering it. I don't mind changing tubed tires over since it only takes a few minutes, but I don't fancy having to deal with sealant every time I change tires.
I was thinking that the idea is change wheels not tires, One dedicated set for road and another set for gravel or off road.
cyclist2000 is offline  
Old 05-09-22, 10:26 PM
  #10  
cyccommute 
Mad bike riding scientist
 
cyccommute's Avatar
 
Join Date: Nov 2004
Location: Denver, CO
Posts: 25,345

Bikes: Some silver ones, a red one, a black and orange one, and a few titanium ones

Mentioned: 137 Post(s)
Tagged: 1 Thread(s)
Quoted: 4913 Post(s)
Liked 2,510 Times in 1,484 Posts
In theory, multiple wheel sets should work. In practice, not so much…especially if you want to ride the same bike over very different terrains. The wheels are of less importance than the frame and drivetrain when being used on varied terrain.
__________________
Stuart Black
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!
Days of Wineless Roads. Bed and Breakfasting along the KATY
Twisting Down the Alley. Misadventures in tornado alley.
cyccommute is offline  
Old 05-09-22, 10:55 PM
  #11  
UniChris
Senior Member
 
UniChris's Avatar
 
Join Date: May 2017
Location: Northampton, MA
Posts: 1,785

Bikes: 36" Unicycle, winter knock-around hybrid bike

Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 872 Post(s)
Liked 362 Times in 261 Posts
Of course it's a compromise compared to having the budget and storage space for two unique bikes, but the gearing doesn't have to be exactly the same, for example one could run an 11-34 on the 650B wheels for looser gravel and an 11-28 or 11-32 on the 700c road wheels, and since the latter are closer spaced subsets within the range of the former the chain length should still be viable with the RD capable of wrapping the bigger one.

That also seems like it could partially undo changing from a 50/34 to a compact 46/30 crankset - sure, the very highest gear would be lost, but the people missing 50:11 and finding 46:11 insufficient are probably precisely the people unwilling to do their road rides on a gravel geometry / tire capacity frame. Plus someone could presumably swap the hill-gears cassette to the road wheel for the occasional mountain climb event run on a well paved road.

Of course to really take advantage of this, I'd probably need to buy not just the 650B wheelset, but another 700c, because the rim width of what I have is more suited to mid-30's gravel tires than road tires; but that also means it's an all-around compromise that does most of what I need, though I wonder a little if I'm wearing out the tread of the gravel tires riding 90% on roads. I've considered just getting some 32mm slicks...

Last edited by UniChris; 05-10-22 at 10:04 AM.
UniChris is offline  
Old 05-10-22, 12:40 AM
  #12  
Venturiano
Junior Member
 
Join Date: May 2022
Posts: 11
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 1 Time in 1 Post
Originally Posted by cyccommute View Post
The wheels are of less importance than the frame and drivetrain when being used on varied terrain.
+1 on the drivetrain and terrain you ride.
Venturiano is offline  
Old 05-10-22, 05:48 AM
  #13  
Kapusta
Advanced Slacker
 
Kapusta's Avatar
 
Join Date: Feb 2017
Posts: 5,600

Bikes: Soma Fog Cutter, Surly Wednesday, Turner 5-Spot, Canfielld Tilt

Mentioned: 26 Post(s)
Tagged: 0 Thread(s)
Quoted: 2504 Post(s)
Liked 2,136 Times in 1,194 Posts
Every time Iíve tried a second wheelset it ends up growing into a whole new bike.
Kapusta is offline  
Likes For Kapusta:
Old 05-10-22, 06:17 AM
  #14  
Herzlos
Full Member
Thread Starter
 
Join Date: Sep 2020
Location: Scotland
Posts: 273

Bikes: Gravel, MTB

Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 466 Post(s)
Liked 375 Times in 209 Posts
Originally Posted by Venturiano View Post
+1 on the drivetrain and terrain you ride.
At the top end, I'm sure. But I'm not in a position I think I'll notice. My 36/48x11-36 on the gravel bike will do me fine or gravel or road; I could maybe do with a larger front cog for the road and a smaller one for gravel but I manage both with the same bike now. Ditto for my 34x11-46 on the mountain bike, it's been fine for everything so far. I just want slicker/faster tires for when I can use them, and knobblier ones for when I need them.

Originally Posted by cyclist2000 View Post
I was thinking that the idea is change wheels not tires, One dedicated set for road and another set for gravel or off road.
It is. I want to be able to pretty quickly change the bike between modes. Currently I can do it on tubed bikes by changing the tires on the same wheel but that's a 10+ minute job instead of a 1 minute job.
Herzlos is offline  
Old 05-10-22, 06:26 AM
  #15  
ofajen
Cheerfully low end
 
ofajen's Avatar
 
Join Date: Jun 2020
Posts: 1,522
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 486 Post(s)
Liked 754 Times in 488 Posts
It worked ok for me with my old 26er MTB but turned out to be unnecessary. I had a set with smooth tires for warmer dryer weather and a second set with small knob tires for winter.

Turns out I like having the Race King with small knobs in front all the time and I made it through winter trail mud with the Speed King in back. So the bike is plenty fast on smooth stuff and plenty stable on muddy trails with no need to swap tires.

I still have an extra rear wheel but I gave the spare front wheel to my son when he smashed up his front wheel when he first started riding again.

Otto
ofajen is online now  
Old 05-10-22, 08:26 AM
  #16  
Troul 
:D
 
Troul's Avatar
 
Join Date: Oct 2013
Location: Mich
Posts: 5,524

Bikes: RSO E-tire dropper fixie brifter

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 6 Post(s)
Liked 1,834 Times in 1,230 Posts
very practical if you are a road rider & have limited time/weather to ride in.
__________________
-Oh Hey!
Troul is offline  
Old 05-10-22, 08:56 AM
  #17  
scottfsmith
I like bike
 
scottfsmith's Avatar
 
Join Date: Feb 2021
Location: Merry Land USA
Posts: 468

Bikes: Roubaix Comp 2020

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 195 Post(s)
Liked 206 Times in 134 Posts
I'm a huge fan of multiple wheel sets. I have one bike (Specialized Roubaix, endurance) and use it for road (30mm Conti GP5000 S TR, Roval CLX50), gravel (35mm Conti Terra Speed, Light Bicycle WR50), and winter studded tires (35mm Schwalbe Marathon Winter Plus, DP Swiss wheels). No the frame is not 100% perfect for gravel but it is 95% perfect.

I have the exact same disc brake and cassette setup on all three wheel sets and I generally don't need to re-align anything when I swap wheels. Its a 2-minute operation.
scottfsmith is offline  
Likes For scottfsmith:
Old 05-10-22, 09:22 AM
  #18  
rumrunn6
Senior Member
 
rumrunn6's Avatar
 
Join Date: Jul 2008
Location: 25 miles northwest of Boston
Posts: 27,419

Bikes: Bottecchia Sprint, GT Timberline 29r, Trek FX Alpha 7.0

Mentioned: 107 Post(s)
Tagged: 0 Thread(s)
Quoted: 4566 Post(s)
Liked 2,237 Times in 1,524 Posts
often toyed w/ the idea but never pursued it. but then, I have 3 bikes
rumrunn6 is offline  
Old 05-10-22, 09:28 AM
  #19  
GhostRider62
Senior Member
 
Join Date: Apr 2021
Posts: 2,675
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 1575 Post(s)
Liked 1,307 Times in 818 Posts
I cannot imagine only having one set of wheels for a bike.

Not a big deal to change wheels.
GhostRider62 is offline  
Old 05-10-22, 09:58 AM
  #20  
sean.hwy
Senior Member
 
sean.hwy's Avatar
 
Join Date: Jan 2020
Location: San Jose
Posts: 715

Bikes: Blur / Ibis Hakka MX

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 283 Post(s)
Liked 172 Times in 129 Posts
I have several wheel sets and chains for my gravel bike. My rear cassettes 30T; 34T; 40T.

Transforms bike between GP5000 28mm carbon wheels 30T; 32mm gravel kings 34T; 38mm knobby tires 40T

TBH now I mostly just ride with the 32mm gravel king slicks. It's a little slower on the road and dirt but can do both. If I riding with my road buddies I have to use the carbon wheels and GP5000. If I am ridding with mnt bike people I need all the help I can get. I still can't keep with them on descents though.

If you don't need extra speed ( to keep up with your friends, chasing strava segment times, etc..) you might just be happy with just one wheel set with 32mm gravel king slicks.
sean.hwy is offline  
Old 05-10-22, 10:10 AM
  #21  
tomato coupe
Senior Member
 
Join Date: Jul 2009
Posts: 3,387

Bikes: Colnago, Van Dessel, Factor, Cervelo, Ritchey

Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 2125 Post(s)
Liked 3,567 Times in 1,456 Posts
Originally Posted by Herzlos View Post
Not wanting to have more bikes, I'm considering getting additional sets of wheels to cover different purposes (so the gravel bike with road and gravel tires, mountain bike with wet and dry tires). I've heard indications that I'm likely to need to have to tweak the rear derailleur when changing between wheels, is that the case?

Would I be better getting exactly the same wheels for both pairs, with the same cassette and discs, or will I be able to get away with swapping between the stock wheels and some upgraded ones?
You can certainly use a gravel frame with multiple sets of wheels to cover a variety of terrain. I can install 1 of 3 sets of wheels on my Aspero (with 25, 32 and 38 mm tires) without having to adjust the brake calipers or the rear derailleur.
tomato coupe is offline  
Likes For tomato coupe:
Old 05-10-22, 10:18 AM
  #22  
WhyFi
Senior Member
 
WhyFi's Avatar
 
Join Date: Jan 2010
Location: TC, MN
Posts: 38,601

Bikes: R3 Disc, Haanjo

Mentioned: 352 Post(s)
Tagged: 1 Thread(s)
Quoted: 19983 Post(s)
Liked 8,603 Times in 4,305 Posts
It's pretty practical if you're only talking about two wheelsets and if you tend not to flip-flop between modes frequently.

Limiting it to two wheelsets makes things nice because it's easier to get things like rotors in agreement (if the positions are slightly off, shim the inboard rotor out to the position of the other rotor; IOW, you can shim a rotor outwards, but not inwards) so that you don't have to fuss with anything when you swap out. And I may just be lucky, but I haven't had to do any RD adjustments to accommodate the cassettes of different wheelsets on a disc bike, but I'm sure that mileage will vary.

That said, I'm kind of lazy and don't want to swap out wheels multiple times per week, but that's usually not a problem.
WhyFi is offline  
Likes For WhyFi:
Old 05-10-22, 03:40 PM
  #23  
Jeff Neese
Senior Member
 
Join Date: Jul 2014
Posts: 708
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 382 Post(s)
Liked 249 Times in 167 Posts
Very practical as long as you can use the same gearing. I had three sets of identical wheels built, specifically for that purpose. Since the rims are the same (Sun CR18) and so is the rear cassette, I don't even have to adjust the brakes.

Nothing makes a bigger difference in the way a bike handles and performs than wheels and tires, so having multiple wheelsets is almost like having completely different bikes only cheaper and doesn't take up as much room. I can switch from smooth pavement (Panaracers) to dirt and gravel (Maxxis Ikon) with a quick wheel change, and for something "in between" I can throw on the Continental Contacts when road conditions permit. It truly is like having three different bikes and it literally takes under 5 minutes to switch.

It's definitely the way to go if you can make it work for you, specifically using the same gearing for all road conditions.
Jeff Neese is offline  
Likes For Jeff Neese:
Old 05-10-22, 03:44 PM
  #24  
Polaris OBark
Dirt Roadie
 
Polaris OBark's Avatar
 
Join Date: Jan 2022
Posts: 1,190
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 634 Post(s)
Liked 798 Times in 481 Posts
Originally Posted by Kapusta View Post
Every time Iíve tried a second wheelset it ends up growing into a whole new bike.
I had this problem. It started when I bought a new frame for an extra crankset.

The good thing is there is a very simple cure: Buy yet another wheel-set.
Polaris OBark is offline  
Old 05-11-22, 07:03 AM
  #25  
Kapusta
Advanced Slacker
 
Kapusta's Avatar
 
Join Date: Feb 2017
Posts: 5,600

Bikes: Soma Fog Cutter, Surly Wednesday, Turner 5-Spot, Canfielld Tilt

Mentioned: 26 Post(s)
Tagged: 0 Thread(s)
Quoted: 2504 Post(s)
Liked 2,136 Times in 1,194 Posts
Originally Posted by Polaris OBark View Post
I had this problem. It started when I bought a new frame for an extra crankset.

The good thing is there is a very simple cure: Buy yet another wheel-set.
Yeah, I find that keeping extra parts around does not end up saving me the cost of buying new parts. It makes me want to use them to build another bike which entails buying more parts.

In the end, second wheelsets just donít work out for me. If different use-cases are different enough to warrant extra wheels, rotors, and a cassette just to have different tires, then there are always other things that I want to change as well (e.g., gearing, cockpit setup, suspension, fenders, racks, or just how tempting it is to thieves).

The only tire swapping I do is putting studs on the commuter in the winter, and some years I swap out the rear tire on my FS mtb for a particularly wet or dry season.

On my Pavement/Gravel bike I just run 38mm Rene Herse EL slicks for everything from pavement to gravel/dirt roads.

Last edited by Kapusta; 05-11-22 at 07:08 AM.
Kapusta is offline  

Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information -

Copyright © 2021 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.