Helmets with eyewear vents
#1
Just a person on bike
Thread Starter
Join Date: Aug 2013
Location: Seattle, WA
Posts: 2,139
Bikes: Specialized Roubaix, Tern HSD, Dahon Speed D7
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 132 Post(s)
Liked 85 Times
in
56 Posts
Helmets with eyewear vents
Hi.
Do you have helmets that have vents / holes that are designed specifically to hold eyewear? If so, do you recommend yours?
If you're wondering what I'm taking about, see the attached image for a reference.
Thanks in advance for your help!
[Note to admins] This has nothing to do with safety.
Do you have helmets that have vents / holes that are designed specifically to hold eyewear? If so, do you recommend yours?
If you're wondering what I'm taking about, see the attached image for a reference.
Thanks in advance for your help!
[Note to admins] This has nothing to do with safety.

__________________
The value of your life doesn't change based on the way you travel. - Dawn Schellenberg (SDOT)
The value of your life doesn't change based on the way you travel. - Dawn Schellenberg (SDOT)
#2
Senior Member
Join Date: Jul 2009
Posts: 5,187
Bikes: Colnago, Van Dessel, Factor, Cervelo, Ritchey
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 3429 Post(s)
Liked 6,214 Times
in
2,510 Posts
Not too surprising, but Oakley helmets have them.
Likes For tomato coupe:
Likes For Camilo:
#4
Senior Member
Join Date: Oct 2016
Posts: 660
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 337 Post(s)
Liked 374 Times
in
222 Posts
The vents in the picture of the helmet you've attached to your post are for ventilation. Yes, you can stick your glasses in there, but they are not designed specifically for holding glasses. You just need to find a helmet with vents located there, as nearly all are (maybe not aero helmets for time trials).
Saying that those helmet vents are designed for eyewear is like saying that a shirt with buttons is designed to hold eyeglasses because you can fold your glasses and stick one of the earpieces down the vee above the last button to hold your glasses.
Saying that those helmet vents are designed for eyewear is like saying that a shirt with buttons is designed to hold eyeglasses because you can fold your glasses and stick one of the earpieces down the vee above the last button to hold your glasses.
Likes For noimagination:
#5
Junior Member
Join Date: Sep 2021
Location: So Cal
Posts: 97
Bikes: 2023 S-Works Tarmac SL7 Dura-Ace Di2, 2022 Cervelo Caledonia-5 SRAM Rival etap AXS, 2019 Specialized Sirrus Elite Alloy, 1977 Schwinn Super LeTour 12.2, 85 Bianchi Limited Shimano New 600EX
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 25 Post(s)
Liked 50 Times
in
28 Posts
I have a Smith Ignite helmet that holds my Oakley sunglasses. Smith actually markets this as a feature...

Likes For Bici Veloce:
#7
Sunshine
Join Date: Aug 2014
Location: Des Moines, IA
Posts: 15,871
Bikes: '18 class built steel roadbike, '19 Fairlight Secan, '88 Schwinn Premis , Black Mountain Cycles Monstercross V4, '89 Novara Trionfo
Mentioned: 121 Post(s)
Tagged: 0 Thread(s)
Quoted: 10277 Post(s)
Liked 6,720 Times
in
3,805 Posts
I have 2 helmets and both have vents that line up with the glasses I use. I flip the sunglasses upside down. The glasses have a relatively straight arm instead of the curved around the temple style of many cycling glasses.
Abus Stormchaser
MET Rivale MIPS
Abus Stormchaser
MET Rivale MIPS
#8
Just a person on bike
Thread Starter
Join Date: Aug 2013
Location: Seattle, WA
Posts: 2,139
Bikes: Specialized Roubaix, Tern HSD, Dahon Speed D7
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 132 Post(s)
Liked 85 Times
in
56 Posts
The vents in the picture of the helmet you've attached to your post are for ventilation. Yes, you can stick your glasses in there, but they are not designed specifically for holding glasses. You just need to find a helmet with vents located there, as nearly all are (maybe not aero helmets for time trials).
Saying that those helmet vents are designed for eyewear is like saying that a shirt with buttons is designed to hold eyeglasses because you can fold your glasses and stick one of the earpieces down the vee above the last button to hold your glasses.
Saying that those helmet vents are designed for eyewear is like saying that a shirt with buttons is designed to hold eyeglasses because you can fold your glasses and stick one of the earpieces down the vee above the last button to hold your glasses.
That said, I am looking for a helmet with vents that are designed to hold eyewear. (Those helmets do exist.) My current one, the Specizlied Propero3, doesn't hold my sunglasses. I tried to stick them into the vents, but it just resulted in the arms hitting my head.
__________________
The value of your life doesn't change based on the way you travel. - Dawn Schellenberg (SDOT)
The value of your life doesn't change based on the way you travel. - Dawn Schellenberg (SDOT)
#9
Over the hill
Join Date: Mar 2006
Location: Los Angeles, CA
Posts: 24,181
Bikes: Giant Defy, Giant Revolt
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 922 Post(s)
Liked 1,060 Times
in
618 Posts
Not that I am aware of. Considering how varied the design is for eyewear, it would be impossible to design a helmet to be universally compatible with them all. Perhaps some brands that make both helmet and eyewear (like Oakley or Rudy Project) make theirs compatible with each other, but anything else is likely to be pure luck. Maybe if you post which model your glasses are, someone here might have a helmet that they fit into, but otherwise I would suggest bringing them into a shop and testing them on various helmets.
__________________
It's like riding a bicycle
It's like riding a bicycle
Likes For prj71:
#11
Should Be More Popular
Join Date: Dec 2007
Location: Malvern, PA (20 miles West of Philly)
Posts: 41,626
Bikes: 1986 Alpine (steel road bike), 2009 Ti Habenero, 2013 Specialized Roubaix
Mentioned: 556 Post(s)
Tagged: 2 Thread(s)
Quoted: 21159 Post(s)
Liked 7,670 Times
in
3,606 Posts
The vents in the picture of the helmet you've attached to your post are for ventilation. Yes, you can stick your glasses in there, but they are not designed specifically for holding glasses. You just need to find a helmet with vents located there, as nearly all are (maybe not aero helmets for time trials).
Saying that those helmet vents are designed for eyewear is like saying that a shirt with buttons is designed to hold eyeglasses because you can fold your glasses and stick one of the earpieces down the vee above the last button to hold your glasses.
Saying that those helmet vents are designed for eyewear is like saying that a shirt with buttons is designed to hold eyeglasses because you can fold your glasses and stick one of the earpieces down the vee above the last button to hold your glasses.
Likes For datlas:
#12
Senior Member
Join Date: Jul 2009
Posts: 5,187
Bikes: Colnago, Van Dessel, Factor, Cervelo, Ritchey
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 3429 Post(s)
Liked 6,214 Times
in
2,510 Posts
#13
Habitual User
Join Date: Jan 2020
Location: Altadena, CA
Posts: 6,643
Bikes: 2019 Trek Procliber 9.9 SL, 2018 Storck Fascenario.3 Platinum, 2017 Bear Big Rock 1, 2003 Time VX Special Pro, 2001 Colnago VIP, 1999 Trek 9900 singlespeed, 1977 Nishiki ONP
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 4050 Post(s)
Liked 6,492 Times
in
3,091 Posts
Not that I am aware of. Considering how varied the design is for eyewear, it would be impossible to design a helmet to be universally compatible with them all. Perhaps some brands that make both helmet and eyewear (like Oakley or Rudy Project) make theirs compatible with each other, but anything else is likely to be pure luck. Maybe if you post which model your glasses are, someone here might have a helmet that they fit into, but otherwise I would suggest bringing them into a shop and testing them on various helmets.
Temple width doesn't vary a lot, and a large number of sunglasses targeted for the cycling market have straight temples. If your helmet works with Oakleys (for example) it will probably work with quite a few other brands.
__________________
"Swedish fish. They're protein shaped." - livedarklions
"Swedish fish. They're protein shaped." - livedarklions
Likes For Eric F:
#14
Habitual User
Join Date: Jan 2020
Location: Altadena, CA
Posts: 6,643
Bikes: 2019 Trek Procliber 9.9 SL, 2018 Storck Fascenario.3 Platinum, 2017 Bear Big Rock 1, 2003 Time VX Special Pro, 2001 Colnago VIP, 1999 Trek 9900 singlespeed, 1977 Nishiki ONP
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 4050 Post(s)
Liked 6,492 Times
in
3,091 Posts
I wasn't aware that the vents of the particular helmet in the picture were general-purpose ones rather than specifically to hold eyewear. Thanks for the information.
That said, I am looking for a helmet with vents that are designed to hold eyewear. (Those helmets do exist.) My current one, the Specizlied Propero3, doesn't hold my sunglasses. I tried to stick them into the vents, but it just resulted in the arms hitting my head.
That said, I am looking for a helmet with vents that are designed to hold eyewear. (Those helmets do exist.) My current one, the Specizlied Propero3, doesn't hold my sunglasses. I tried to stick them into the vents, but it just resulted in the arms hitting my head.
My Scott Centric Plus works fairly well with Oakley and Tifosi glasses. I can feel the temples/arms against the top of my head, but it's not enough to be bothersome. My Ekoi Legende holds glasses really well.
__________________
"Swedish fish. They're protein shaped." - livedarklions
"Swedish fish. They're protein shaped." - livedarklions
#15
Sunshine
Join Date: Aug 2014
Location: Des Moines, IA
Posts: 15,871
Bikes: '18 class built steel roadbike, '19 Fairlight Secan, '88 Schwinn Premis , Black Mountain Cycles Monstercross V4, '89 Novara Trionfo
Mentioned: 121 Post(s)
Tagged: 0 Thread(s)
Quoted: 10277 Post(s)
Liked 6,720 Times
in
3,805 Posts
Also, POC helmets(some? all?) have little rubber pads on a couple of vents and they exist specifically for holding glasses in place.
#16
Habitual User
Join Date: Jan 2020
Location: Altadena, CA
Posts: 6,643
Bikes: 2019 Trek Procliber 9.9 SL, 2018 Storck Fascenario.3 Platinum, 2017 Bear Big Rock 1, 2003 Time VX Special Pro, 2001 Colnago VIP, 1999 Trek 9900 singlespeed, 1977 Nishiki ONP
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 4050 Post(s)
Liked 6,492 Times
in
3,091 Posts
Likes For Eric F:
#17
Senior Member
Join Date: Nov 2017
Location: Seattle
Posts: 1,891
Bikes: Specialized Roubaix, Canyon Inflite AL SLX, Ibis Ripley AF, Priority Continuum Onyx, Santana Vision, Kent Dual-Drive Tandem
Mentioned: 20 Post(s)
Tagged: 0 Thread(s)
Quoted: 833 Post(s)
Liked 694 Times
in
414 Posts
I bought an Oakley ARO3 recently to hold my sunglasses. They have a groove cutout at the sides of the vents for a snug fit.
My Bell Z20 has rubberized grips in the vents to hold sunglasses, but they don't work at all for my Flak 2.0s. They're better at holding the wider Radar EVs, but I forgot while using the Flaks and chipped my lenses looking down a few too many times for my liking.
My Bell Z20 has rubberized grips in the vents to hold sunglasses, but they don't work at all for my Flak 2.0s. They're better at holding the wider Radar EVs, but I forgot while using the Flaks and chipped my lenses looking down a few too many times for my liking.
#18
Advocatus Diaboli
Join Date: Feb 2015
Location: Wherever I am
Posts: 8,413
Bikes: Merlin Cyrene, Nashbar steel CX
Mentioned: 14 Post(s)
Tagged: 1 Thread(s)
Quoted: 4595 Post(s)
Liked 1,452 Times
in
942 Posts
I just tuck an arm of the sunglasses into my jersey/base below my neck -- old habit doing the same in street clothes while wearing a t-shirt. Am I doing it all wrong?
#19
Over the hill
Join Date: Mar 2006
Location: Los Angeles, CA
Posts: 24,181
Bikes: Giant Defy, Giant Revolt
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 922 Post(s)
Liked 1,060 Times
in
618 Posts
Met Trenta 3K..."Sunglasses Ports - Dedicated sunglasses ports with rubberized grips for securely stowing your shades when they aren't on your face". I'm fairly sure I've seen other helmets also indicate sunglasses docking as a feature of the design.
Temple width doesn't vary a lot, and a large number of sunglasses targeted for the cycling market have straight temples. If your helmet works with Oakleys (for example) it will probably work with quite a few other brands.
Temple width doesn't vary a lot, and a large number of sunglasses targeted for the cycling market have straight temples. If your helmet works with Oakleys (for example) it will probably work with quite a few other brands.
#20
Habitual User
Join Date: Jan 2020
Location: Altadena, CA
Posts: 6,643
Bikes: 2019 Trek Procliber 9.9 SL, 2018 Storck Fascenario.3 Platinum, 2017 Bear Big Rock 1, 2003 Time VX Special Pro, 2001 Colnago VIP, 1999 Trek 9900 singlespeed, 1977 Nishiki ONP
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 4050 Post(s)
Liked 6,492 Times
in
3,091 Posts
Reading through all the responses, it seems like there is a selection to pick from - Met, Abus, POC, Smith... That said, there will be others that hold glasses very well, but don't advertise it as a "feature".
__________________
"Swedish fish. They're protein shaped." - livedarklions
"Swedish fish. They're protein shaped." - livedarklions
Likes For Eric F:
#21
Junior Member
Join Date: Sep 2021
Location: So Cal
Posts: 97
Bikes: 2023 S-Works Tarmac SL7 Dura-Ace Di2, 2022 Cervelo Caledonia-5 SRAM Rival etap AXS, 2019 Specialized Sirrus Elite Alloy, 1977 Schwinn Super LeTour 12.2, 85 Bianchi Limited Shimano New 600EX
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 25 Post(s)
Liked 50 Times
in
28 Posts
I never knew this existed until a couple weeks ago, ironic that a post arrives soon after. We've probably spent way more time than necessary on the subject, but I thought I would toss in my two cents
#22
Habitual User
Join Date: Jan 2020
Location: Altadena, CA
Posts: 6,643
Bikes: 2019 Trek Procliber 9.9 SL, 2018 Storck Fascenario.3 Platinum, 2017 Bear Big Rock 1, 2003 Time VX Special Pro, 2001 Colnago VIP, 1999 Trek 9900 singlespeed, 1977 Nishiki ONP
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 4050 Post(s)
Liked 6,492 Times
in
3,091 Posts
Scott Centric Plus with Oakleys…

__________________
"Swedish fish. They're protein shaped." - livedarklions
"Swedish fish. They're protein shaped." - livedarklions
Likes For Eric F:
#23
Senior Member
Join Date: May 2022
Location: USA
Posts: 2,125
Bikes: Cannondale - Gary Fisher - Giant - Litespeed - Schwinn Paramount - Schwinn (lugged steel) - Trek OCLV
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 927 Post(s)
Liked 1,158 Times
in
687 Posts


Smith Forefront 2
features ports / slots designed to hold eyewear in the front or rear of the helmet
https://www.smithoptics.com/en_US/p/...223K45155.html
.
#24
Senior Member


Smith Forefront 2
features ports / slots designed to hold eyewear in the front or rear of the helmet
https://www.smithoptics.com/en_US/p/...223K45155.html
.
Last edited by staehpj1; 05-31-23 at 05:11 AM.
#25
I don't know.
Join Date: May 2003
Location: South Meriden, CT
Posts: 1,727
Bikes: '90 B'stone RB-1, '92 B'stone RB-2, '89 SuperGo Access Comp, '03 Access 69er, '23 Trek 520, '14 Ritchey Road Logic, '09 Kestrel Evoke, '17 Surly Wednesday, '89 Centurion Accordo, '15 CruX, '17 Ridley X-Night
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 229 Post(s)
Liked 555 Times
in
303 Posts
I've always been a little jelly of those with helmets that hold their sunnies. None of mine have ever been compatible.