![]() |
I have been dealing with Rheumatoid Arthritis for the last several years so I have tried different things to help. While out in Portland Oregon last summer I was at Biketiresdirect and the gentleman there showed me a set of handlebars called Kitchen Sink Handlebars by a company named Redshift. I am very intrigued by these and wonder if they will help with some added positions for riding. Have any of you seen these and tried them ? They aren't to pricey at about $140.00 dollars. Any thoughts ?
|
Boomer58, sorry to hear about the rheumatoid I personally know it can be the worst after some exposure. I have a Reshift gravel bar with their Cruise Control Drop Bar Grips under gel pads made from shoe insoles to get by. That bar might help but changing your stem would do the same thing if you have a gravel bar (less drop and more flare) and give more options which is the way I have gone.
|
Bar tape:
You might take a look at gymnastics bar grips. Gymnasts put a lot of pressure on those hands as their weight ultimately end up there during their routines. It's not a glove but a grip and its not a padding. Both mens and women's are similar but may vary |
So this is what I’m trying for now. It’s a baseball hitters thumb guard. First ride seems promising 👍
https://cimg2.ibsrv.net/gimg/bikefor...d4b2ab5fc.jpeg |
Originally Posted by jolly_codger
(Post 23513801)
Almost forgot; I have a pair of these that I can use under more thinly padded gloves, work very well for the thumb web area. They have lasted several years so far, so decent stuff.
https://cimg7.ibsrv.net/gimg/bikefor...07fe2c965b.png Just came back from a 1st ride - 38 miles - and have to give these 2 thumbs up and a clink of the Bier steins! They are quite cushy. The thickness seems about right for me, good cushion without too much bulk. Being able to use them with most any of my gloves, except those which are quite tight & close fitting. AFter a few minutes of riding,I mostly forgot about them; until I started to get some jarring terrain/surface - at that point their shock absorption became very obvious. Great ! Thanks Yuri |
I absolutely love these gloves. I've used them for years/decades for cycling, and even for trail running with hiking poles.
https://aerotechdesigns.com/products...rotchet-gloves I wouldn't want to ride without them. |
Originally Posted by cyclezen
(Post 23527802)
I suggested these to my Spouse - she recently had Carpal Tunnel surgery to relieve pressure on nerves. She loves these so much I decided to order a pair for myself.
Just came back from a 1st ride - 38 miles - and have to give these 2 thumbs up and a clink of the Bier steins! They are quite cushy. The thickness seems about right for me, good cushion without too much bulk. Being able to use them with most any of my gloves, except those which are quite tight & close fitting. AFter a few minutes of riding,I mostly forgot about them; until I started to get some jarring terrain/surface - at that point their shock absorption became very obvious. Great ! Thanks Yuri John |
I am amazed at all the gloves with Gel padding 'clusters' on the palms and especially where the nerves run . Some engineer needs to look at the exact opposite - don't the glove people know that adding 'padding' just increases pressure on the nerves? What is needed is gloves with gel padding everywhere except over the nerves run - tada - no pressure on the nerves!
That, by the way, is why gloves with padding all over the surface, or even gloves with no padding, seem to work a lot better. |
Originally Posted by jolly_codger
(Post 23513801)
Almost forgot; I have a pair of these that I can use under more thinly padded gloves, work very well for the thumb web area. They have lasted several years so far, so decent stuff.
https://cimg7.ibsrv.net/gimg/bikefor...07fe2c965b.png |
| All times are GMT -6. The time now is 11:58 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.