Is my season over- please help!!!!
 

for this year, yesterday I got a flat, there is so much glass on the streets here, it is a joke, anyway, I got the flat, and I decided to ride home, the tube came out of the tire, and wrapped itself around the chain and cassette, does anyone know how to remove it? I don't want to take the tire of if I don't have to.:o

If you don't feel comfortable taking it off yourself, I would take it to a bike shop. You may have bent your derailleur too. Chances are the tube is shot anyway.

THe tube is finshed, as I was removing the leftover tube, it split in pieces, I will have to bring it to a Bike SHop to get them to check the derailler

Sorry, but you must remove the tyre, anyways. Stop complaining. Do it.

If you rode home with a flat tire, your $5.00 problem just turned into a $100 problem depending on how good your wheel was before you trashed it by riding it without a tire.

Thanks everyone for their replies, I guess I was dumb to ride it home, but I was not more that 6 minutes from, and I wanted to get home as quickly as possible, I will have to bring my bike to a repair shop, early next spring, and see what they have to say, in the meantime, I want to wish everyone the best, and happy riding. :beer:

You really need to learn how to fix a flat on your bike. It's not hardand it takes less than five minutes and requires absolutely no tools other than a tire pump. I always carry a spare tube with patches as a backup, just in case I get the rare second flat in one ride (It happens). Just flip the quick release (brakes and wheel), take off the wheel, grab the tire at the top of the wheel with both hands and pull it towards you and down (take off the valve stem nut first if you use them) rip out the old tube. Then carefully run your fingers inside the tire to see if you can find the cause of the flat (I've had dozens of flats and have only once found what caused any of them) remove the offensive sharp thing and toss it far from the riding surface. Slip one side of the tire back on the rim, stuff the tube in the tire and give the pump a stroke or two to partially fill the tube to avoid pinching it between the rim and the tire. Next, pop the other side of the tire on the rim (If you have dainty fingers you can use a tire bar/levers but they are not necessary). Put a few more pumps in it check that the tire is evenly seated in the rim them sit down and pump it up. I've seen people mount the wheel back on the bike then struggle to balance the bike while trying to pump up the wheel (don't make it harder than it has to be). When you're done pumping it up, mount the wheel, set the brakes, stick the old tube in your pocket and you're on your way. When I get home I toss the old tube in the trash and put a new one in my seat bag. Others brag about riding a tube with 15 patches, that's up to you.

I know how you feel. I had a flat about a mile from home last week. it was cold and dark and raining, and though I had the tools and a spare tube I just rode the bike home, leaning over the front wheel to keep my weight off the back..

Totally trashed the tyre. I've now fitted a slime protector tape in the back tyre.