Advice on Grips that are angled?
#1
Senior Member
Thread Starter
Join Date: Aug 2008
Posts: 2,589
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 239 Post(s)
Likes: 0
Liked 7 Times
in
7 Posts
Advice on Grips that are angled?
I recently switched from flat/riser bars to trekking bars.
With the old flat bars, they angle back slightly; but with the trekking bars, the 'flat' lower portion is straignt across with no angle at all.
This slight difference is enough to bother my wrists a little bit.
So I am wondering if, there are grips which are cylindrical, but with an eccentric/skewed hole so they can be angled differently from the bars they are put onto. This way even though the bars are straight across, the grips would angle my wrists outwards for comfort...
Does such a thing exist? any reccomendations for something inexpensive?
Thanks
EDIT:
heres a quick sketch of what I want:
Just a simple round rubber grip that slides on. But is angled instead of parralel to the bar.
With the old flat bars, they angle back slightly; but with the trekking bars, the 'flat' lower portion is straignt across with no angle at all.
This slight difference is enough to bother my wrists a little bit.
So I am wondering if, there are grips which are cylindrical, but with an eccentric/skewed hole so they can be angled differently from the bars they are put onto. This way even though the bars are straight across, the grips would angle my wrists outwards for comfort...
Does such a thing exist? any reccomendations for something inexpensive?
Thanks
EDIT:
heres a quick sketch of what I want:
Just a simple round rubber grip that slides on. But is angled instead of parralel to the bar.
Last edited by xenologer; 06-28-09 at 11:30 PM.
#3
Senior Member
Thread Starter
Join Date: Aug 2008
Posts: 2,589
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 239 Post(s)
Likes: 0
Liked 7 Times
in
7 Posts
I have seen Ergons, but thats not what I want.
Those seem primarially aimed at providing support for the palms of the hands and controlling a vertical angle.
I'm insterested in angling of the grip horizontally (yaw).
Those seem primarially aimed at providing support for the palms of the hands and controlling a vertical angle.
I'm insterested in angling of the grip horizontally (yaw).
#4
Senior Member
Join Date: Jan 2008
Posts: 284
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Not to sound discouraging, but I don't think you're going to find anything. Also, a set of obscure grips is likely to cost around $30 for a pair; for that much money you can just get new handlebars. Perhaps the On One Mary bar, or Origin-8's cheaper copy (I think it's called the Space)?
To go even cheaper, get a set of Dimension North Road or swept bars from any QBP distributor. I got mine for $13.
To go even cheaper, get a set of Dimension North Road or swept bars from any QBP distributor. I got mine for $13.
Last edited by alpacalypse; 06-29-09 at 08:17 AM.
#5
xtrajack
Join Date: Aug 2008
Location: Maine
Posts: 2,058
Bikes: Kona fire mountain/xtracycle,Univega landrover fs,Nishiki custom sport Ross professional super gran tour Schwinn Mesa (future Xtracycle donor bike)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
How do you have them mounted? I have my trekking bars mounted so that the flat open ends are angled up in the front.
#6
Bike ≠ Car ≠ Ped.
Send that drawing to the patent office with an application.
#7
Senior Member
Join Date: Sep 2006
Location: Paradise, TX
Posts: 2,087
Bikes: Soma Pescadero, Surly Pugsley, Salsa Fargo, Schwinn Klunker, Gravity SS 27.5, Monocog 29er
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 186 Post(s)
Liked 234 Times
in
166 Posts
Have you tried the Origin 8 Space bar? It has about 30 degrees of sweep. If that's too much I think Surly makes a flat bar with 15 degrees of sweep.
#8
Senior Member
Great idea, but I suspect the market would be too small to justify production.
Would it be possible to have that end of the treking bar bent to a more comfortable angle? I'm thinking of an electrician with a conduit bending tool.
Would it be possible to have that end of the treking bar bent to a more comfortable angle? I'm thinking of an electrician with a conduit bending tool.
__________________
Some people are like a Slinky ... not really good for anything, but you still can't help but smile when you shove them down the stairs.
Some people are like a Slinky ... not really good for anything, but you still can't help but smile when you shove them down the stairs.
#9
Senior Member
Thread Starter
Join Date: Aug 2008
Posts: 2,589
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 239 Post(s)
Likes: 0
Liked 7 Times
in
7 Posts
I figured it may not exist...
Seems to me like it's potentially useful; lets you add a small amount of angle adjustment onto existing bars for the price of a pair of grips. I figure it shouldn't cost any more than the usual ones since its just rubber with a different mould.
Anyone know where I can buy blocks of rubber or foam of the water proof kind used in grips? Depending on the cost of that kind of material I might just have to make them myself...
Absolutely not, they're aluminum that that would be very unsafe to do.
Seems to me like it's potentially useful; lets you add a small amount of angle adjustment onto existing bars for the price of a pair of grips. I figure it shouldn't cost any more than the usual ones since its just rubber with a different mould.
Anyone know where I can buy blocks of rubber or foam of the water proof kind used in grips? Depending on the cost of that kind of material I might just have to make them myself...
Absolutely not, they're aluminum that that would be very unsafe to do.
#10
Fax Transport Specialist
I've seen handles that are molded onto a hammer which seem to give it an angled grip. Not sure if there's a grip thats designed to be a customized add-on though.
Last edited by black_box; 06-30-09 at 09:45 AM.
#11
GO BIG RED
Join Date: Nov 2008
Location: Hastings,NE
Posts: 678
Bikes: 1996 Bianchi Veloce 1993 Bridgestone MB-3 1992 Trek 700 1992 Trek 820
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
There's a type of black rubber electricians tape (definitely not the average vinyl stuff) that bonds to itself when its wrapped overlapping around an item. I've made custom grips for my bikes as well as for my fishing rods with this stuff. It's very durable and has a cross-hatch textured surface. I can't recall what it's called but I get it at the local hardware store. A electrical supply store would be a good place to look.
#12
Senior Member
That's "friction tape", norwood. I've used it for grips other than bicycles, though, and it tended to leave my hands black.
__________________
Some people are like a Slinky ... not really good for anything, but you still can't help but smile when you shove them down the stairs.
Some people are like a Slinky ... not really good for anything, but you still can't help but smile when you shove them down the stairs.
#13
Senior Member
Join Date: Dec 2007
Posts: 2,118
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
There's a type of black rubber electricians tape (definitely not the average vinyl stuff) that bonds to itself when its wrapped overlapping around an item. I've made custom grips for my bikes as well as for my fishing rods with this stuff. It's very durable and has a cross-hatch textured surface. I can't recall what it's called but I get it at the local hardware store. A electrical supply store would be a good place to look.
To the OP, your proposition would leave you with a bigger grip overall, fine if you have big hands.
#14
GO BIG RED
Join Date: Nov 2008
Location: Hastings,NE
Posts: 678
Bikes: 1996 Bianchi Veloce 1993 Bridgestone MB-3 1992 Trek 700 1992 Trek 820
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
#16
DancesWithSUVs
Join Date: Apr 2005
Location: Griffin Cycle Bethesda,MD
Posts: 6,983
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 7 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
Not textured,but this stuff rocks:
https://www.duluthtrading.com/search/...ature=&kw=tape
It's extremely durable. I used to use it back in the day when I worked on aircraft and it holds up amazingly well. This plus some rubber or gel blocks would prolly give you what you're looking for.
You could also try mounting your trekking bar like this:
https://www.sheldonbrown.com/deakins/handlebars.html
Sheldon used to mount his bars so that they were similar to moustashe bars,which could give you the curve you're looking for.
https://www.duluthtrading.com/search/...ature=&kw=tape
It's extremely durable. I used to use it back in the day when I worked on aircraft and it holds up amazingly well. This plus some rubber or gel blocks would prolly give you what you're looking for.
You could also try mounting your trekking bar like this:
https://www.sheldonbrown.com/deakins/handlebars.html
Sheldon used to mount his bars so that they were similar to moustashe bars,which could give you the curve you're looking for.
__________________
C'dale BBU('05 and '09)/Super Six/Hooligan8and 3,Kona Dew Deluxe,Novara Buzz/Safari,Surly Big Dummy,Marin Pt Reyes,Giant Defy 1,Schwinn DBX SuperSport,Dahon Speed Pro TT,Brompton S6L/S2E-X
C'dale BBU('05 and '09)/Super Six/Hooligan8and 3,Kona Dew Deluxe,Novara Buzz/Safari,Surly Big Dummy,Marin Pt Reyes,Giant Defy 1,Schwinn DBX SuperSport,Dahon Speed Pro TT,Brompton S6L/S2E-X
#18
Senior Member
Thread Starter
Join Date: Aug 2008
Posts: 2,589
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 239 Post(s)
Likes: 0
Liked 7 Times
in
7 Posts
Not textured,but this stuff rocks:
You could also try mounting your trekking bar like this:
https://www.sheldonbrown.com/deakins/handlebars.html
Sheldon used to mount his bars so that they were similar to moustashe bars,which could give you the curve you're looking for.
You could also try mounting your trekking bar like this:
https://www.sheldonbrown.com/deakins/handlebars.html
Sheldon used to mount his bars so that they were similar to moustashe bars,which could give you the curve you're looking for.
The open ends on mine tho happen to to parralel to each other though, not curved upwards like on the silver ones pictured.
Anyway, at the moment I'm attempting to build grips to do what I wanted, out of cork sheeting... will see how that works out.
Tho gel blocks wrapped in tape might be good too if that fails...
Where do I find nice carvable blocks of gel/rubber tho?
#19
Pwnerer
I seem to recall a kit out for molding a phallus of your John Thomas...you know, for when you're away and the Missus misses the little Mister. Despite the original purpose, it seems to me that a rubbery material like that could be molded to the shape of your hand.
Oh geez...I just thought about what that could connote.
I'd provide a link, but I'll leave that particular bit of googling up to your discretion.
EDIT: OK, this may be an option not requiring a discreet brown paper wrapper...or answering embarrassing questions about your grips "fleshtone" coloring.
Last edited by Wordbiker; 07-02-09 at 01:44 AM.
#20
DancesWithSUVs
Join Date: Apr 2005
Location: Griffin Cycle Bethesda,MD
Posts: 6,983
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 7 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
You could also prolly use Great Stuff or another sealer/insulating type foam.
__________________
C'dale BBU('05 and '09)/Super Six/Hooligan8and 3,Kona Dew Deluxe,Novara Buzz/Safari,Surly Big Dummy,Marin Pt Reyes,Giant Defy 1,Schwinn DBX SuperSport,Dahon Speed Pro TT,Brompton S6L/S2E-X
C'dale BBU('05 and '09)/Super Six/Hooligan8and 3,Kona Dew Deluxe,Novara Buzz/Safari,Surly Big Dummy,Marin Pt Reyes,Giant Defy 1,Schwinn DBX SuperSport,Dahon Speed Pro TT,Brompton S6L/S2E-X
#21
Senior Member
__________________
Some people are like a Slinky ... not really good for anything, but you still can't help but smile when you shove them down the stairs.
Some people are like a Slinky ... not really good for anything, but you still can't help but smile when you shove them down the stairs.
#22
GO BIG RED
Join Date: Nov 2008
Location: Hastings,NE
Posts: 678
Bikes: 1996 Bianchi Veloce 1993 Bridgestone MB-3 1992 Trek 700 1992 Trek 820
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
This is what I used. It's from ACE Hardware.