Tightening a wheel spoke
Hi,
I am new to bikes and have an old bike I would like to fix. First of all, there is a loose spoke/nipple. When I try to tighten this nipple, it seems to just unwind itself as soon as I let go. Am I do soemthing wrong here or is it unfixable? Thanks for any advice. |
Put a drop of lube on the threads. What you are experiencing is spoke windup. Free the threads and you'll be able to turn the nipple.
It's not a bad idea to put a drop on each nipple before truing. |
hi, thanks for the quick response. Hmm I tried using WD-40 as the lube and still can't quite get the nipple to twist. From the center of the wheel looking towards the tires, do I twist the nipple clockwise or counter-clockwise to tighten?
|
The nipple screws onto the spoke in the same way a nut screws onto a bolt.
If you are looking down the spoke from the rim toward the hub, turn the nipple clockwise to tighten it. ***A word of caution*** Continuing to "refurbish" this bicycle could get you hooked on an insatiable desire to ride and work on bikes. (My wife is so very tired of seeing me tinker on my bikes.);) |
Originally Posted by maka1
(Post 9306301)
hi, thanks for the quick response. Hmm I tried using WD-40 as the lube and still can't quite get the nipple to twist. From the center of the wheel looking towards the tires, do I twist the nipple clockwise or counter-clockwise to tighten?
|
Originally Posted by MMACH 5
(Post 9306553)
The nipple screws onto the spoke in the same way a nut screws onto a bolt.
If you are looking down the spoke from the rim toward the hub, turn the nipple clockwise to tighten it. ***A word of caution*** Continuing to "refurbish" this bicycle could get you hooked on an insatiable desire to ride and work on bikes. (My wife is so very tired of seeing me tinker on my bikes.);)
Originally Posted by prathmann
(Post 9306623)
From that vantage point it would be counter-clockwise. But it sounds like the nipple is probably badly corroded onto the spoke threads and therefore not actually turning on the threads at all - just winding up the spoke. Then when you release the nipple the spoke unwinds again. Penetrating oil or applying more force (i.e. turning it further) might loosen it up, but you may just have to replace that spoke.
|
Originally Posted by MMACH 5
(Post 9306553)
The nipple screws onto the spoke in the same way a nut screws onto a bolt.
If you are looking down the spoke from the rim toward the hub, turn the nipple clockwise to tighten it. ***A word of caution*** Continuing to "refurbish" this bicycle could get you hooked on an insatiable desire to ride and work on bikes. (My wife is so very tired of seeing me tinker on my bikes.);) Aaron:) |
All times are GMT -6. The time now is 05:56 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.