Bike Forums

Bike Forums (https://www.bikeforums.net/forum.php)
-   General Cycling Discussion (https://www.bikeforums.net/general-cycling-discussion/)
-   -   Brifters for small hands? (https://www.bikeforums.net/general-cycling-discussion/744664-brifters-small-hands.html)

Rhodabike 06-18-11 08:36 AM

Brifters for small hands?
 
I'm not sure if this is the right place to post this question, but here goes.
Last summer in the Pyrennees I rented a road bike that had Campagnolo brifters and liked the way they fit and worked. Unfortunately the bike itself was too small so I took it back and got another, this time with Shimano Sora. My hands and forearms were aching like crazy by the time I returned the bike a few days later. The brake levers were huge and it seemed like I had to go through this huge range of motion to shift gears.
Now I have a new touring bike that came with Sora brifters. Same problem - too much range of motion and too big, so I swapped out for Dura Ace bar end shifters. They work really well, but I occasionally wonder if the brifters that I like on that first rental bike would work with my Shimano 9 speed system. Changing the whole cassette/derailleur/shifter setup would be a bit out of my budget.

PatW 06-18-11 08:42 AM

I would think that Campy would make short reach shifters. I know that Shimano does. Short reach shifters are for people with smaller hands.

10 Wheels 06-18-11 08:48 AM


Originally Posted by Rhodabike (Post 12805560)
I'm not sure if this is the right place to post this question, but here goes.
Last summer in the Pyrennees I rented a road bike that had Campagnolo brifters and liked the way they fit and worked. Unfortunately the bike itself was too small so I took it back and got another, this time with Shimano Sora. My hands and forearms were aching like crazy by the time I returned the bike a few days later. The brake levers were huge and it seemed like I had to go through this huge range of motion to shift gears.
Now I have a new touring bike that came with Sora brifters. Same problem - too much range of motion and too big, so I swapped out for Dura Ace bar end shifters. They work really well, but I occasionally wonder if the brifters that I like on that first rental bike would work with my Shimano 9 speed system. Changing the whole cassette/derailleur/shifter setup would be a bit out of my budget.

http://www.bikeforums.net/showthread...or-small-hands

Nermal 06-18-11 03:17 PM

Thanks, 10 Wheels. Good link.

I don't know if it's a useful observation, but I had a big problem getting a good reach on the brake levers, except when using the drops. Finally, we went to a moustache bar and the horizontal arrangement of the levers totally solved the problem. Suddenly, my hands were big enough. This was on the touring bike. Someone else might not care for it on a straight up road bike. Anyway, it was definately cheaper than changing brifters.


All times are GMT -6. The time now is 10:28 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.