Need set back seat stem
#1
Junior Member
Thread Starter
Need set back seat stem
Need to set my seat back a couple inches. Where can I get a stem with a cantilever to position the seat further back? Not carbon, not gold plated price. No, I'm not gonna get another frame right now.
Thanks.
Thanks.
#2
Senior Member
Join Date: Oct 2010
Location: Utah
Posts: 589
Bikes: Thorn Nomad Mk2, 1996 Trek 520, Workcycles Transport, Brompton
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
https://www.rivbike.com/product-p/sp3.htm
I s'pose that's practically gold-plated, but it's a start anyway!
I s'pose that's practically gold-plated, but it's a start anyway!
#3
Banned
Kalloy,Plain type seat Post,
Brompton Saddle Adapter Pin.. Adds a horizontal 7/8" tube,
clamping onto the top, of the other seat-post tube,
[which is also 7/8, 22.2mm]
then you put the saddle clip on The SAP.
with the clip rotated to take the saddle above it.
This Brompton Dealer adds a QR normal delivery is a pinch bolt,
the piece is threaded into one ear, for that bolt.
https://www.foldabikes.com/CloseUp/bike/sapMain.html
but you may have a clue about its usability, from the picture.
Brompton Saddle Adapter Pin.. Adds a horizontal 7/8" tube,
clamping onto the top, of the other seat-post tube,
[which is also 7/8, 22.2mm]
then you put the saddle clip on The SAP.
with the clip rotated to take the saddle above it.
This Brompton Dealer adds a QR normal delivery is a pinch bolt,
the piece is threaded into one ear, for that bolt.
https://www.foldabikes.com/CloseUp/bike/sapMain.html
but you may have a clue about its usability, from the picture.
Last edited by fietsbob; 10-19-12 at 01:04 PM.
#4
Humvee of bikes =Worksman
Join Date: May 2004
Posts: 5,362
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 10 Post(s)
Likes: 0
Liked 6 Times
in
6 Posts
I,too, needed a setback seat post for my Cruiser. In the end I had to have it made at a welding shop of stainless steel. Could be an answer for your needs.
Warning!! Be extra careful of any ready made set back post on the market. They may not ,as was the case for me, as strong as they look. Two of the post I tried bent a block from my home.
__________________
My preferred bicycle brand is.......WORKSMAN CYCLES
I dislike clipless pedals on any city bike since I feel they are unsafe.
Originally Posted by krazygluon
Steel: nearly a thousand years of metallurgical development
Aluminum: barely a hundred, which one would you rather have under your butt at 30mph?
My preferred bicycle brand is.......WORKSMAN CYCLES
I dislike clipless pedals on any city bike since I feel they are unsafe.
Originally Posted by krazygluon
Steel: nearly a thousand years of metallurgical development
Aluminum: barely a hundred, which one would you rather have under your butt at 30mph?
#5
Senior Member
Join Date: Sep 2011
Location: Dallas Fort Worth Metroplex
Posts: 5,058
Bikes: 2013 Haro FL Comp 29er MTB.
Mentioned: 9 Post(s)
Tagged: 0 Thread(s)
Quoted: 1470 Post(s)
Likes: 0
Liked 45 Times
in
35 Posts
Pictures, ho much set back do you need> I had to get one with Zero offset when I changed bikes. I ended up with a Thompson. But most bike shops carry a standard offset seat post as does Nashbar and Proformance. https://www.nashbar.com/bikes/Product...72_-1___202452
https://www.performancebike.com/bikes..._400002_400216
https://www.performancebike.com/bikes..._400002_400216
#6
Senior Member
Join Date: Oct 2011
Location: PNW
Posts: 181
Bikes: Ti Lite and a Vaya
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
Here's the Kalloy:
https://www.universalcycles.com/shopp...1&category=758
Kinda heavy, but not unattractive
https://www.universalcycles.com/shopp...1&category=758
Kinda heavy, but not unattractive
#7
Full Member
Try some triatholon retailers or forums. I've got a post moderne tri post that offers 44mm of setback. They've been offered over the years by Nitto, Easton and FSA among probably others. Keep looking and you'll find one. Also look for saddles that have a longer rail.
If this is to fix the relation of your leg to the crank, then you need a set back seatpost. If its to increase the size of your cockpit, then you'd do better with a longer stem. If you need more than 1.5" anywhere, you need a bigger bike.
If this is to fix the relation of your leg to the crank, then you need a set back seatpost. If its to increase the size of your cockpit, then you'd do better with a longer stem. If you need more than 1.5" anywhere, you need a bigger bike.
#8
Senior Member
Join Date: Aug 2008
Posts: 2,589
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 239 Post(s)
Likes: 0
Liked 7 Times
in
7 Posts
and the lowprice requirement.
You will probably need this:
Black Ops Layback Seatpost
https://www.amazon.com/Black-Layback-.../dp/B000AO9P02
It's a bmx post, so you will also need a shim to make it fit your frame.
#9
Humvee of bikes =Worksman
Join Date: May 2004
Posts: 5,362
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 10 Post(s)
Likes: 0
Liked 6 Times
in
6 Posts
The design is sound but the tubing they are made from is way,way to thin walled....like chromed tissue paper!
__________________
My preferred bicycle brand is.......WORKSMAN CYCLES
I dislike clipless pedals on any city bike since I feel they are unsafe.
Originally Posted by krazygluon
Steel: nearly a thousand years of metallurgical development
Aluminum: barely a hundred, which one would you rather have under your butt at 30mph?
My preferred bicycle brand is.......WORKSMAN CYCLES
I dislike clipless pedals on any city bike since I feel they are unsafe.
Originally Posted by krazygluon
Steel: nearly a thousand years of metallurgical development
Aluminum: barely a hundred, which one would you rather have under your butt at 30mph?