Misaligned brakes
01-09-15, 06:17 PM
#1
Senior Member
Thread Starter
Join Date: Oct 2014
Posts: 564
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Misaligned brakes
I noticed today when adjusting my bike's brakes that using the rear brakes actually caused the top part of my rear wheel to slightly bend to the left.
Could this have un-trued my wheels? It's an Easton Vista.
What should I do? Other than adjust the brakes (which I have).
Could this have un-trued my wheels? It's an Easton Vista.
What should I do? Other than adjust the brakes (which I have).
01-09-15, 06:22 PM
#2
PatronSaintOfDiscBrakes
Join Date: Apr 2005
Location: BicycleSPACE warehouse in SW Washington DC
Posts: 6,980
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
What bike and what brakes? Sounds like your brake is misaligned. Look here for instructions.
__________________
C'dale BBU('05 and '09)/Super Six/Hooligan8and 3,Kona Dew Deluxe,Novara Buzz/Safari,Surly Big Dummy,Marin Pt Reyes,Giant Defy 1,Schwinn DBX SuperSport,Dahon Speed Pro TT,Brompton S6L/S2E-X
C'dale BBU('05 and '09)/Super Six/Hooligan8and 3,Kona Dew Deluxe,Novara Buzz/Safari,Surly Big Dummy,Marin Pt Reyes,Giant Defy 1,Schwinn DBX SuperSport,Dahon Speed Pro TT,Brompton S6L/S2E-X
01-09-15, 06:52 PM
#3
Senior Member
Thread Starter
Join Date: Oct 2014
Posts: 564
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
What bike and what brakes? Sounds like your brake is misaligned. Look here for instructions.
01-09-15, 07:56 PM
#5
Senior Member
Thread Starter
Join Date: Oct 2014
Posts: 564
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
01-09-15, 08:06 PM
#6
That Huffy Guy
Join Date: Jun 2014
Location: Ashtabula, Ohio
Posts: 1,438
Bikes: Old School Huffy Bikes
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 79 Post(s)
Likes: 0
Liked 3 Times
in
3 Posts
I had a brake issue where one side would rub and was worried about the wheel being true and discovered the rear wheel was not center in the rear mounts. Loosed the rear wheel, recentered, and all was good.
01-09-15, 08:14 PM
#7
Senior Member
Join Date: Nov 2014
Location: Eugene, Oregon, USA
Posts: 27,530
Mentioned: 217 Post(s)
Tagged: 0 Thread(s)
Quoted: 17517 Post(s)
Liked 4,141 Times
in
3,078 Posts
Just spin the wheel and watch the rim near the brake calipers.
Or, use your finger, or a pen as a reference point.
That is pretty much all truing does, and many people have successfully trued wheels on the bike.
Your wheel should be pretty resistant to a small twist.
Consider the forces on wheel during a hard standing hill climb when you're weaving the frame back and forth.
