Bike Forums

Bike Forums (https://www.bikeforums.net/forum.php)
-   Hybrid Bicycles (https://www.bikeforums.net/hybrid-bicycles/)
-   -   Seat post (https://www.bikeforums.net/hybrid-bicycles/1047941-seat-post.html)

yashinon 02-07-16 11:31 AM

Seat post
 
I picked up a Selle Anatomica saddle but have yet to mount it. Any reason to swap out the seat post with something lighter/better on the Trek 7.4? I have heard good things about the Thompon posts.

TakingMyTime 02-09-16 08:50 AM

Outside of a difference in weight or some vibration dampening with carbon I personally think changing out a seat post of mostly an aesthetic thing. With that said, I do like the looks of Thomson stuff.

ColonelSanders 02-13-16 09:02 AM


Originally Posted by yashinon (Post 18518529)
I picked up a Selle Anatomica saddle but have yet to mount it. Any reason to swap out the seat post with something lighter/better on the Trek 7.4? I have heard good things about the Thompon posts.


Originally Posted by TakingMyTime (Post 18522893)
Outside of a difference in weight or some vibration dampening with carbon I personally think changing out a seat post of mostly an aesthetic thing. With that said, I do like the looks of Thomson stuff.

I was reading a review for the Thomson seatpost and they said that due to the two bolt design they use to hold the rails, you can't put the nose of your saddle any lower than dead even.

That may not be an issue for many people, but something to keep in mind.

TakingMyTime 02-13-16 07:20 PM


Originally Posted by ColonelSanders (Post 18533390)
I was reading a review for the Thomson seatpost and they said that due to the two bolt design they use to hold the rails, you can't put the nose of your saddle any lower than dead even.

That is good to know. Thanks.

Shimagnolo 02-13-16 07:46 PM


Originally Posted by ColonelSanders (Post 18533390)
I was reading a review for the Thomson seatpost and they said that due to the two bolt design they use to hold the rails, you can't put the nose of your saddle any lower than dead even.

That may not be an issue for many people, but something to keep in mind.

That is flat out false.
I have Thomsons on two bikes, run the nose ~1cm lower than the rear, and there is plenty of adjustment left to go lower.

TakingMyTime 02-13-16 07:54 PM

Thank you for clearing that up so quickly.

ColonelSanders 02-13-16 11:18 PM


Originally Posted by Shimagnolo (Post 18534622)
That is flat out false.
I have Thomsons on two bikes, run the nose ~1cm lower than the rear, and there is plenty of adjustment left to go lower.

This is the link and reviews in question, do you have the same seatpost?

These reviews are from 2011, so perhaps a change has since been made?

Thomson Elite Layback Seatpost | Chain Reaction Cycles
Beautiful and well made but there is a but!

by Anonymous, 30 November 2011, 5 out of 6 people found this review helpful

As far as seat posts go there is no doubting this is an exquisite piece of engineering, it is all one piece and it is light and stong too and I am very happy with it, it looks stunning on my steel Genesis....however.....be WARNED >>>>> if buying the layback post, as per other reviews, I can confirm that if you have your seatpost high and saddle tilting forward towards your stem then you wont be able to with this post as the bracket has been engineered level with the layback and not tilted forward so most of the adjustment angles available point your saddle tip skywards, mine is set on the most extreme of available angles forward and my saddle is just level. Come on Thompson you can do better.....otherwise awsome product.
Quality but not the angle of dangle!

by Anonymous, 2 September 2011, 3 out of 3 people found this review helpful

Fantastic quality as always, but and it's a big but, the layback post only just about manages to get your saddle to level, being tall I have about 280 mm of post showing and normally have my saddle tilted low at the nose pointing to headset this is the perfect attack angle for me - but is not possible with this post!! The fixing mech has been engineered the easy way with the mech inline with the layback part of seat post which automatically means its set pointing to the sky and can only just about manage to get level at its max - rather than the mech being engineered at 90 degrees to the vertical section so you'd then get a full range of adjustment. Will take it for a ride in morning and see if I can live with it!

Shimagnolo 02-13-16 11:48 PM

My posts are both Thomson Elite, but are the zero-setback, not the "Layback" version.

ColonelSanders 02-14-16 12:50 AM

4 Attachment(s)
BTW, this is the seatpost I would get if I had a 27.2mm seatpost need.

What a beauty it is. 45mm offset/setback & Lugged Cro-Moly Seatpost. :love:

Nitto Tokyo S-84 Lugged Seat Post - 27.2mm - Saddles / Seatposts

http://bikeforums.net/attachment.php...hmentid=504405 http://bikeforums.net/attachment.php...hmentid=504406 http://bikeforums.net/attachment.php...hmentid=504407 http://bikeforums.net/attachment.php...hmentid=504408


All times are GMT -6. The time now is 05:26 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.