Post pictures of your Hybrid
#1276
S'Cruzer
if your frame has no screws for fenders/rack on the dropouts, you can use rubber covered metal clamps on the seat stays to support a rack (I've used some pipe clamps I found at the hardware store for this in the past). and, if you have no screw mounts on the side of the seat stays, you can use either the brake bridge on the seat stays, or a clamp consisting of a pair of 3" or so long bars that clamp to both seat stays and provide a mounting point for the upper rack. many old school cheap racks came with stay clamps.
#1277
Senior Member
Join Date: Dec 2008
Location: Orange Park, Florida
Posts: 846
Bikes: jamis xenith comp '08, trek 750 hybrid (w/drops) c.1995, centurian fixie, kona cindercone mtb c.2000
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
if your frame has no screws for fenders/rack on the dropouts, you can use rubber covered metal clamps on the seat stays to support a rack (I've used some pipe clamps I found at the hardware store for this in the past). and, if you have no screw mounts on the side of the seat stays, you can use either the brake bridge on the seat stays, or a clamp consisting of a pair of 3" or so long bars that clamp to both seat stays and provide a mounting point for the upper rack. many old school cheap racks came with stay clamps.
#1278
S'Cruzer
I went and used M3 metric allen stuff with them when I used those to put a rack on a that had no bolt holes. I only used them for the bottom end of the rack, the top side, I did something with the brake bridge between the seat stays.
#1279
Senior Member
#1280
Junior Member
Join Date: Jul 2010
Location: Woodbridge, VA
Posts: 6
Bikes: Specialized Crosstrail
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
My Specialized Crosstrail in April. I've since swapped out the stock grips with ergonomic ones and added a camera mount. Other than that, everything is still pretty much stock parts!
#1281
Junior Member
Join Date: May 2010
Location: Lausanne, SWwitzerland
Posts: 14
Bikes: Giant Seek 3
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
No offence, If you really want that Orbea you should get it, but I personally think it is a bad choice.
It costs more than $2000 because it has a carbon frame and fork and ultegra components ... this brings the weight down to about 10 kilos.
If you would get a bike that is almost exactly the same bike but with an aluminum frame and fork and ... let's say ... a 105 group of components, that bike would cost less than half the price of this-one, while only weighing about 1 or max 2 kilos more.
Do you want to pay $1000+ for a bit more than 1 kilo off of the total weight of your weight plus the weight of your bike?
Unless you are planning on doing amateur races, I personally think that there is no reason for this, but you are free to spend your money on whatever you like, ofcourse.
Take a look at the Orbea Aneto, for instance, and compare the price and the weight & components to the Diem Ice
It costs more than $2000 because it has a carbon frame and fork and ultegra components ... this brings the weight down to about 10 kilos.
If you would get a bike that is almost exactly the same bike but with an aluminum frame and fork and ... let's say ... a 105 group of components, that bike would cost less than half the price of this-one, while only weighing about 1 or max 2 kilos more.
Do you want to pay $1000+ for a bit more than 1 kilo off of the total weight of your weight plus the weight of your bike?
Unless you are planning on doing amateur races, I personally think that there is no reason for this, but you are free to spend your money on whatever you like, ofcourse.
Take a look at the Orbea Aneto, for instance, and compare the price and the weight & components to the Diem Ice
I actually own a Giant Seek 4. Quite nice looking, with decent components for a fraction of the Orbea's price. And most importantly, it does the job (daily commute of about 25 miles round trip).
#1282
Senior Member
Join Date: Apr 2010
Location: Vlaamse Ardennen, Belgium
Posts: 3,898
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 3 Times
in
3 Posts
The comparison with Apple is perfect.
I do not advice anyone to buy anything made by Apple for the exactly the same reasons
If people want overpriced stuff that is less versatile because it supposedly makes them cool, I guess it'll just have to be that way.
A fine example is the new Ipad ... a silly device with very little functions and nothing new ... but hype it enough and people will buy it and even fight to the death for it if they have to.
I've got a Panasonic Toughbook here ... it has everything an Ipad has and more and it has been that way for nearly a decade ... although they are pricey though.
I also had a 6GB MP3 player before the Ipod came out, but once the Ipod came they hyped it so it seemed they invented the whole thing.
I do not advice anyone to buy anything made by Apple for the exactly the same reasons
If people want overpriced stuff that is less versatile because it supposedly makes them cool, I guess it'll just have to be that way.
A fine example is the new Ipad ... a silly device with very little functions and nothing new ... but hype it enough and people will buy it and even fight to the death for it if they have to.
I've got a Panasonic Toughbook here ... it has everything an Ipad has and more and it has been that way for nearly a decade ... although they are pricey though.
I also had a 6GB MP3 player before the Ipod came out, but once the Ipod came they hyped it so it seemed they invented the whole thing.
#1284
Banned
Join Date: Mar 2004
Location: Maryland
Posts: 5,155
Bikes: rockhopper, delta V, cannondale H300, Marin Mill Valley
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 5 Times
in
5 Posts
I'm not sure carbon fiber is superior to aluminum to the same degree that Apple computers and Apple mp3 players are superior to their competitors' products, but anyone who claims he wouldn't enjoy owning that Orbea or a iPad is lying or delusional.
#1285
Senior Member
Join Date: Apr 2010
Location: Vlaamse Ardennen, Belgium
Posts: 3,898
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 3 Times
in
3 Posts
I choose to defer.
I would not enjoy owning an Ipad as I already have superior hardware and thus will find the Ipad inferior and crap.
I would not enjoy owning an Ipad as I already have superior hardware and thus will find the Ipad inferior and crap.
#1287
Senior Member
Join Date: Apr 2010
Location: Vlaamse Ardennen, Belgium
Posts: 3,898
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 3 Times
in
3 Posts
Not delusional, just lucky to be in subcontracted service of one of the biggest telecom companies in Belgium.
They provide me with this beauty:
https://gearpatrol.com/blog/2007/04/2...-toughbook-30/
Read the specs, look at the looks and then tell me you wouldn't prefer one of these over an Ipad
I have the version with 14" touchscreen, UMTS and extra battery btw.
Oh sorry ... let's get back to the pictures, shall we?
They provide me with this beauty:
https://gearpatrol.com/blog/2007/04/2...-toughbook-30/
Read the specs, look at the looks and then tell me you wouldn't prefer one of these over an Ipad
I have the version with 14" touchscreen, UMTS and extra battery btw.
Oh sorry ... let's get back to the pictures, shall we?
#1289
Junior Member
Join Date: Jul 2010
Location: Nashville, TN
Posts: 16
Bikes: Diamondback Wildwood
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I'm super new to this board, but I figured I'd post a pic or two of my diamondback
this is my first venture into the bike world in probably 20 years, glad I went with a hybrid, been loving it so far
this is my first venture into the bike world in probably 20 years, glad I went with a hybrid, been loving it so far
#1290
S'Cruzer
After moving my parts onto a larger frame, I scrounged enough parts to put this bike back together as a 21 speed with 700x40 City reflectorized tires and grip shifters...
my daughter doesn't much like it, she wants me to keep this instead...
(a lightweight 7 speed 'cruiser' with 26x1.9 fatties and old school bmx alloy bars-n-stuff that I've had for 30 years)
as an alternate to her preferred bike...
its way too small for my son (he's taller than I am, with longer legs )...
we now have 9 bikes, I'm thinking a couple have to go, and this little red one is one of them. sigh.
my daughter doesn't much like it, she wants me to keep this instead...
(a lightweight 7 speed 'cruiser' with 26x1.9 fatties and old school bmx alloy bars-n-stuff that I've had for 30 years)
as an alternate to her preferred bike...
its way too small for my son (he's taller than I am, with longer legs )...
we now have 9 bikes, I'm thinking a couple have to go, and this little red one is one of them. sigh.
Last edited by pierce; 07-29-10 at 10:21 PM.
#1291
Senior Member
Join Date: Apr 2010
Location: Vlaamse Ardennen, Belgium
Posts: 3,898
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 3 Times
in
3 Posts
As I said before, weight is a marginal factor ... both in bikes and in laptops
I'd rather have a sturdy bike or laptop that can take a beating instead of having a superlight bike or laptop that is fragile.
The cost of a new toughbook like mine is about $5000, but as I said: I got it from the company
I'd rather have a sturdy bike or laptop that can take a beating instead of having a superlight bike or laptop that is fragile.
The cost of a new toughbook like mine is about $5000, but as I said: I got it from the company
#1293
S'Cruzer
Its a neat ride, but its a small frame. The concept I had in mind was a mini cruiser but with useful gears and lighter-faster wheels.
I think it would be best for a petite person... in the picture, the seat is as high up as a 350mm seat post will safely go, and its 2-3" lower than I'd like, I'm 6' tall with somewhat shorter than normal legs. My daughter is 5'4 with long legs, it fits her fine. Those 40c tires work pretty well on dirt, too, if you're not too heavy. I rode it with a 400mm seat post, and that went high enough for my legs but the frame just felt too small.
it needs a new seat and new shift-grips (or alternate style shifters and regular grips), as the old grips I used are gooey. ok, and the pedals are plastic junk wellgo stuff. everything else is pretty new (brand new sealed BB, fresh repacked older hubs, good condition chain, almost unused rear 7-speed freewheel, fresh pads on the brakes, all new cables).
I think it would be best for a petite person... in the picture, the seat is as high up as a 350mm seat post will safely go, and its 2-3" lower than I'd like, I'm 6' tall with somewhat shorter than normal legs. My daughter is 5'4 with long legs, it fits her fine. Those 40c tires work pretty well on dirt, too, if you're not too heavy. I rode it with a 400mm seat post, and that went high enough for my legs but the frame just felt too small.
it needs a new seat and new shift-grips (or alternate style shifters and regular grips), as the old grips I used are gooey. ok, and the pedals are plastic junk wellgo stuff. everything else is pretty new (brand new sealed BB, fresh repacked older hubs, good condition chain, almost unused rear 7-speed freewheel, fresh pads on the brakes, all new cables).
#1294
Senior Member
your front wheel looks huge in this picture probably just an optical illusion right??
#1295
S'Cruzer
#1296
Junior Member
Join Date: Jul 2010
Posts: 5
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
'09 Gary Fisher Kaitai
2009 Gary Fisher Kaitai, slightly modified.
A little delivery run to UPS.
On the trail, today's ride. The clouds were nice, broke up the deserts otherwise shadeless 90+ degrees.
Thanks for checking my bike out! Ride Safe.
A little delivery run to UPS.
On the trail, today's ride. The clouds were nice, broke up the deserts otherwise shadeless 90+ degrees.
Thanks for checking my bike out! Ride Safe.
#1297
Born Again Pagan
Join Date: Aug 2009
Location: Southwestern Ontario
Posts: 2,241
Bikes: Schwinn hybrid, Raleigh MTB
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
Here's my new pride and joy; a 2010 Norco Ceres - Reynolds 525 frame, Shimano mechanical disc brakes, Alfine hub, and belt drive. Smooth as silk!
Changes from stock include a Serfas RX saddle, Greenfield Stabilizer kickstand, and sealed-bearing pedals with clips & toe straps.
Changes from stock include a Serfas RX saddle, Greenfield Stabilizer kickstand, and sealed-bearing pedals with clips & toe straps.
#1299
Senior Member
Join Date: Apr 2010
Location: Vlaamse Ardennen, Belgium
Posts: 3,898
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 3 Times
in
3 Posts
Very nice bike there Dryheat.
One question: do you specifically like that kind of handlebar?
In Belgium these handlebars are on traditional townbikes and I find them very unhandy, controlless and painfull for the wrists.
Love the big lights ... makes it look like a motorbike a bit.
I've also got a setup with 2 led headlights ... it's great for doing nighttime trailriding
One question: do you specifically like that kind of handlebar?
In Belgium these handlebars are on traditional townbikes and I find them very unhandy, controlless and painfull for the wrists.
Love the big lights ... makes it look like a motorbike a bit.
I've also got a setup with 2 led headlights ... it's great for doing nighttime trailriding
#1300
Bicycle Repair Man !!!
irclean - I like the fact the Norco is offered belt drive models at prices normal folks can afford...