How can we get the price of these down?
#1
Senior Member
Thread Starter
Join Date: Dec 2005
Posts: 3,481
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
How can we get the price of these down?
https://blogs.orlandosentinel.com/spo...t-bike-av.html
Think of how much longer of a commute you can make on a bike with this! Unfortunately, the article says it cost him about $8,000. Yikes!
With a bike manufactured in California, this French engineering manager averages 28 mph on his 64-mile commute doing 35 mph on the flats....
The engineering manager has raised eyebrows along the A27 on his journey to work in Portsmouth from his home in Angmering on a torpedo-shaped Lightning F40.
Malcolm tops speeds of 30mph on the 80-minute journey but is regularly stopped by members of the public who want to know what he is riding.
The engineering manager has raised eyebrows along the A27 on his journey to work in Portsmouth from his home in Angmering on a torpedo-shaped Lightning F40.
Malcolm tops speeds of 30mph on the 80-minute journey but is regularly stopped by members of the public who want to know what he is riding.
#2
bragi
Join Date: Jun 2006
Location: seattle, WA
Posts: 2,911
Bikes: LHT
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 3 Times
in
3 Posts
It's probably economies of scale; if more people bought these things, the price would go down. Which leads to the obvious question: just how practical is this thing? Can you haul groceries with it? How well can the rider see the things around him/her? How visible is the rider to other traffic? Can you keep it upright if you're stopped at a light? I've never seen one up close, so I honestly don't know, but if it's a pain in the a** to deal with in traffic or to haul stuff, the extra 10mph isn't at all worth it, and if the price is high, too, the thing is doomed to oddball status forever.
#3
Senior Member
Join Date: Aug 2007
Location: British Columbia, Canada
Posts: 2,206
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
It's quite pricey. At $8,000, it's more money than I've spent on any car I've ever owned. For that price, I need to know I'm getting a practical and reliable mode of transportation.
I'm looking at some pragmatic concerns here. How stable is it? Is it practical in snowy and icy winter conditions? Can I use it for my day-to-day needs? Can I get it repaired quickly and easily, or better yet, can I do the repairs myself? How will it work on the hills?
I'm looking at some pragmatic concerns here. How stable is it? Is it practical in snowy and icy winter conditions? Can I use it for my day-to-day needs? Can I get it repaired quickly and easily, or better yet, can I do the repairs myself? How will it work on the hills?
#5
Senior Member
Join Date: Aug 2004
Location: Houston, TX 77095
Posts: 1,470
Bikes: Specialized Sequoia Elite, Schwinn Frontier FS MTB, Centurion LeMans (1986)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
If someone has a long, simple, straight commute, he / she could do well with this by lashing a DiNotte or two to the back and laser-beaming any faster vehicles off of the rear.
But snow, ice, very congested slow stop & go, partially off-road, paths & trails... and it gets less practical.
Honestly... I could use something like this on my commute. I could go 20 miles one-way on major 45 MPH arterials.
I think I'll look into it after $10 per gallon gasoline takes a good bit of the traffic off of the road, and slows the remaining traffic down.
But snow, ice, very congested slow stop & go, partially off-road, paths & trails... and it gets less practical.
Honestly... I could use something like this on my commute. I could go 20 miles one-way on major 45 MPH arterials.
I think I'll look into it after $10 per gallon gasoline takes a good bit of the traffic off of the road, and slows the remaining traffic down.
__________________
Peter Wang, LCI
Houston, TX USA
Peter Wang, LCI
Houston, TX USA
#6
Senior Member
Join Date: May 2005
Location: IL-USA
Posts: 1,859
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 111 Post(s)
Likes: 0
Liked 5 Times
in
5 Posts
https://blogs.orlandosentinel.com/spo...t-bike-av.html
,,,,
Think of how much longer of a commute you can make on a bike with this! Unfortunately, the article says it cost him about $8,000. Yikes!
,,,,
Think of how much longer of a commute you can make on a bike with this! Unfortunately, the article says it cost him about $8,000. Yikes!
What you can do that's pretty fast is a long-wheelbase recumbent with a front fairing and a bodysock:
https://www.easyracers.com/vbb/showth...p?postid=20443
...Easyracers are pretty expensive bikes ($2500+) but there are other similar bikes for down around $1100 or so. A front bubble fairing will cost $350, and the bodysock can be made cheap for a few bucks. 25+ MPH on level ground is easily possible, but you may need a outsized big chainring, 54 - 56T or so.
----
The problem with hard fairings on 2-wheel bikes is that they are very susceptible to being pushed around from side winds. Body socks are fabric and so they have some "give" to them that makes this less of a problem.
There are velomobiles (pedal-powered trikes) made with full bodies too, but they usually cannot hold nearly the speeds that a faired two-wheeler can. And they cost a pile of money too--the Waw for example is one of the best-looking examples, but it has a base price that's around $10K. The Quest and the Mango (shown down the page here) are two of the more popular ones.
~
#7
Pedaled too far.
Join Date: Oct 2005
Location: La Petite Roche
Posts: 12,851
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 11 Post(s)
Likes: 0
Liked 7 Times
in
7 Posts
Well, according to the Lightning Web Site, the F40 does have foot slits for putting your legs down, and the American retail price is only $5,800, not $8,000. Very expensive to be sure, but much cheaper. I still have to wonder how much benefit I would get in the hills of Arkansas. Downhill yes, but uphill I'm not so sure of.
__________________
"He who serves all, best serves himself" Jack London
#8
Senior Member
Join Date: Jul 2000
Location: Snowy midwest
Posts: 5,391
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
Ah, these mpv contraptions have been hit by inflation too. About four years ago, I made a pile of money and went out to get a new vehicle. However, rather than buying a cadillac, I went looking at the full-body-fairing human powered vehicle. They were knocking around $6,000 then. Even though I had the money, wanted a cool ride, and am a bicycle enthusiast, I just could not justify it.
At $8,000+, it is even farther out of reach.
Who knows, maybe with the cost pressures of fuels, there will be enough interest in production-manufacturing these things so that they are irresistable to buy. Who wants to be the first to go to China and have them made for $89.00?
At $8,000+, it is even farther out of reach.
Who knows, maybe with the cost pressures of fuels, there will be enough interest in production-manufacturing these things so that they are irresistable to buy. Who wants to be the first to go to China and have them made for $89.00?
#9
Senior Member
Join Date: Sep 2005
Posts: 4,697
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 6 Post(s)
Likes: 0
Liked 10 Times
in
9 Posts
DIY may be the best way to make one practicable.
The EAA is a global civilian aviation organization dedicated to experimental and homebuilt aircraft.
Membership is cheap, and seminars on building techniques such as THIS one on composite construction are put on by the local chapters, and such seminars are at many of the major air shows. The EAA is an amazing resource of information and assistance for homebuilding.
If one was willing to forgo carbon and use glass, you could build a lot of velomobile for eight thousand dollars.
My current favorite velomobile
AeroRider
The EAA is a global civilian aviation organization dedicated to experimental and homebuilt aircraft.
Membership is cheap, and seminars on building techniques such as THIS one on composite construction are put on by the local chapters, and such seminars are at many of the major air shows. The EAA is an amazing resource of information and assistance for homebuilding.
If one was willing to forgo carbon and use glass, you could build a lot of velomobile for eight thousand dollars.
My current favorite velomobile
AeroRider
Last edited by Allen; 04-13-08 at 07:05 PM.
#10
bragi
Join Date: Jun 2006
Location: seattle, WA
Posts: 2,911
Bikes: LHT
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 3 Times
in
3 Posts
DIY may be the best way to make one practicable.
The EAA is a global civilian aviation organization dedicated to experimental and homebuilt aircraft.
Membership is cheap, and seminars on building techniques such as THIS one on composite construction are put on by the local chapters, and such seminars are at many of the major air shows. The EAA is an amazing resource of information and assistance for homebuilding.
If one was willing to forgo carbon and use glass, you could build a lot of velomobile for eight thousand dollars.
My current favorite velomobile
AeroRider
The EAA is a global civilian aviation organization dedicated to experimental and homebuilt aircraft.
Membership is cheap, and seminars on building techniques such as THIS one on composite construction are put on by the local chapters, and such seminars are at many of the major air shows. The EAA is an amazing resource of information and assistance for homebuilding.
If one was willing to forgo carbon and use glass, you could build a lot of velomobile for eight thousand dollars.
My current favorite velomobile
AeroRider
This looks pretty cool, but, again, it's only practical if you have a commute over flat ground with few stops. The Aerorider website states that these vehicles have a top speed of 45 km/hr (27mph). On flat ground, I can easily do 18-20mph on a bike with a steel frame, for which I paid $75 (before upgrades). I'm not willing to spend a bunch of money, and have to deal with an electric assist, for an extra 7 mph. And, over very hilly terrain, such as exists in Seattle, I'm not sure a velomobile will work out too well for riding around town.
I don't have anything against them, mind you; they're very nice, and I wouldn't mind playing around on one if I had the chance, but I think their intended uses are too narrowly defined to make them useful for most people.
Oh, and one more thing: since you're in an enclosed space, don't you get really hot riding one?
#11
Senior Member
Join Date: May 2005
Location: IL-USA
Posts: 1,859
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 111 Post(s)
Likes: 0
Liked 5 Times
in
5 Posts
DIY may be the best way to make one practicable.
...
If one was willing to forgo carbon and use glass, you could build a lot of velomobile for eight thousand dollars.
My current favorite velomobile
AeroRider
...
If one was willing to forgo carbon and use glass, you could build a lot of velomobile for eight thousand dollars.
My current favorite velomobile
AeroRider
As far as velomobiles go, the main reason people seem to get them is to enable comfortably riding in very-cold weather. People who do it say you only need to dress moderately even for below-freezing temperatures; the only part of you that needs a lot of clothes is your head. They don't ride them to go fast. Even over flat ground they average "trike speeds", which is a nice way of saying "well under 20 mph".
The super-expensive velomobiles are all-carbon-fiber and might weigh 65 lbs; the cheaper ones can approach 100 lbs.
------
The real utility of a velomobile comes when you attach a small 4-cycle engine. You could cruise along all day at 30+ MPH, at probably 250-300 mpg or more (I'm guessing here, since a normal motorized bicycle can get over 200 mpg with no fairing at all). And if the engine died, you could still pedal the thing home--just not quite at 35 mph.
~
#12
Senior Citizen
Join Date: Feb 2005
Location: no
Posts: 1,346
Bikes: yes
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Electric would be cheaper.
#13
Senior Member
#14
The Idler
Join Date: Apr 2006
Location: Kona,Hawaii
Posts: 457
Bikes: Tour Easy/Mukluk
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 16 Post(s)
Liked 0 Times
in
0 Posts
I just saw this at the Earth Day show yesterday.
It's called the bugE and it's an electric vehicle. It look pretty cool. I wonder how long the batteries would last.
Here's a video
https://www.youtube.com/watch?v=Aq8F_FY7sqw
It's called the bugE and it's an electric vehicle. It look pretty cool. I wonder how long the batteries would last.
Here's a video
https://www.youtube.com/watch?v=Aq8F_FY7sqw
#15
Senior Member
Join Date: May 2005
Location: IL-USA
Posts: 1,859
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 111 Post(s)
Likes: 0
Liked 5 Times
in
5 Posts
Not right now it wouldn't--at least in the US.
This is a page of mine, comparing the cost-per-mile of an electric setup (Bionx) and a gasoline-engine setup:
https://www.norcom2000.com/users/dcim...pisode005.html
The cost of electricity for an e-vehicle is almost nothing, but the cost of replacing the batteries is enormous--and many e-bike owners fail to factor this into their figures.
My figuring (using Bionx's own performance claims) showed that electric vehicle power won't become cost-competitive with gasoline until the price of gasoline rises to at least $14/gal, and with some setups not until gasoline costs over $27/gal.
Battery technology is always improving of course, but currently it's nowhere near the costs that US gasoline is.... And the efficiency of gasoline engines could be increased ~50% today, just by going to long-stroke, low-RPM engine designs (crosshead engines).
~
This is a page of mine, comparing the cost-per-mile of an electric setup (Bionx) and a gasoline-engine setup:
https://www.norcom2000.com/users/dcim...pisode005.html
The cost of electricity for an e-vehicle is almost nothing, but the cost of replacing the batteries is enormous--and many e-bike owners fail to factor this into their figures.
My figuring (using Bionx's own performance claims) showed that electric vehicle power won't become cost-competitive with gasoline until the price of gasoline rises to at least $14/gal, and with some setups not until gasoline costs over $27/gal.
Battery technology is always improving of course, but currently it's nowhere near the costs that US gasoline is.... And the efficiency of gasoline engines could be increased ~50% today, just by going to long-stroke, low-RPM engine designs (crosshead engines).
~
#16
Senior Member
Join Date: Mar 2005
Location: Toronto
Posts: 970
Bikes: Miyata 600, Marin Larkspur, Marin Muirwoods, GT tequesta, Fuji Ace
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I was following a couple of these on my ride yesterday. With no wind I was able to keep up on my slick tire MTB/hybrid, but into a 25 kph wind, they pulled decisively ahead.
I also noticed that they slowed right down to make a tight right turn, which I was able to make at speed. So it seems that they have a problem with manouverability.
Finally, how do these things deal with real world situations like - dirt paths, ravines, railway tracks that are parallel to roadways, big potholes, and rocks?
If the velomobile only works on smooth pavement, it's not really practical. My 0.02 is that you could save the $8000 and live in a walkable neighbourhood.
They did look super cool though
I also noticed that they slowed right down to make a tight right turn, which I was able to make at speed. So it seems that they have a problem with manouverability.
Finally, how do these things deal with real world situations like - dirt paths, ravines, railway tracks that are parallel to roadways, big potholes, and rocks?
If the velomobile only works on smooth pavement, it's not really practical. My 0.02 is that you could save the $8000 and live in a walkable neighbourhood.
They did look super cool though
#17
Senior Citizen
Join Date: Feb 2005
Location: no
Posts: 1,346
Bikes: yes
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Given current engine designs, the lower limit for gasoline fuel consumption in something like a Quest would be ~$250/60,000 miles in fuel costs. The problem being that the available power would suffer due to the extreme gearing, so the rider would need to be content with a max of 30mph on flat ground or have some sort of transmission for the gas engine as well. Since good deep cycle lead acids can be had for ~$100/1kWh and last ~40,000 miles, that's something like half the cost per mile of gasoline.
P.S. I coulda swore we had this convo before...
#18
Senior Member
Join Date: May 2005
Location: IL-USA
Posts: 1,859
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 111 Post(s)
Likes: 0
Liked 5 Times
in
5 Posts
I picked the four that BionX offered, as those were (at the time) the more common hi-performance battery types available from BionX as well as other similar companies, and nobody at the time argued that the performance estimates that BionX gave were unreasonable either way.
{On long-stroke designs boosting gas engine efficiency ~50%}
Marine crosshead engines have efficiencies typically near twice what regular gasoline engines do. Part of that is being diesels, but part of it is having a stroke that's around four times the piston diameter. I looked for a long time for any similar small engine, and didn't find any. Apparently if one really wanted to know, one would have to build one yourself to find out.
I don't remember.
But if we did, I probably pointed out that the only common type of electric vehicle on the planet is trains fed by overhead wires--because they aren't limited by battery capacities.
~
#19
The King of Town
Join Date: Mar 2004
Location: Richmond, VA
Posts: 681
Bikes: Haro Backtrail 20" (MISSING), Fuji Berkeley fixie, Huffy cruisercommuterdeathmobile
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
The main problem I see with these small EVs and HPVs is that I own a car in order to carry lots of stuff with me, carry friends, or go at highway speeds for fairly long distances. In general, these vehicles seem about as useful as traditional bicycles but more expensive. In fact, from what I've seen, you could probably carry more on a loaded tourer than on a bugE.
#20
The Idler
Join Date: Apr 2006
Location: Kona,Hawaii
Posts: 457
Bikes: Tour Easy/Mukluk
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 16 Post(s)
Liked 0 Times
in
0 Posts
What about electic power or a small gasoline engine on things that we already have that are relativiley cheap. Like a LWB recumbent with a fairing. I imagine due to the light weight of rider and bike a small gas/electric engine could get great mpg pushing a recumbent. Or an electric engine with a small battery that could be recharged at any plug?
Would is be possble to have enough power to get 20mph at a range of 30 miles?
I also like the idea of building off the technologies that we already have. I imagine a lot more people would ride/coast if the engine was doing the work. It's not a perfect solution but it's got a much smaller foot print than driving a car or suv.
Would is be possble to have enough power to get 20mph at a range of 30 miles?
I also like the idea of building off the technologies that we already have. I imagine a lot more people would ride/coast if the engine was doing the work. It's not a perfect solution but it's got a much smaller foot print than driving a car or suv.
#21
put our Heads Together
Join Date: Jun 2003
Location: southeast pennsylvania
Posts: 3,155
Bikes: a mountain bike with a cargo box on the back and aero bars on the front. an old well-worn dahon folding bike
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I can't do a comparison of something if it's not commonly available, and there's no reviews or independent figures on it.
DeWalt "36volt" tool batteries are Lithium Iron Phosphate batteries and so are the popular, reliable, highly regarded offerings from "ping" and "yesa" on E-bay.
I have a Yesa pack and it works great.
Would is be possble to have enough power to get 20mph at a range of 30 miles?
#22
Senior Citizen
Join Date: Feb 2005
Location: no
Posts: 1,346
Bikes: yes
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I can't do a comparison of something if it's not commonly available, and there's no reviews or independent figures on it.
I picked the four that BionX offered, as those were (at the time) the more common hi-performance battery types available from BionX as well as other similar companies, and nobody at the time argued that the performance estimates that BionX gave were unreasonable either way.
I picked the four that BionX offered, as those were (at the time) the more common hi-performance battery types available from BionX as well as other similar companies, and nobody at the time argued that the performance estimates that BionX gave were unreasonable either way.
I don't think ya did, but who knows.