Upright handlebars
 

Hey Gang,

I have a Trek 970, 91' I believe, I'd like to fit with some comfortable upright handlebars, due to some recent back problems.
Anyone have a recommendations for which to buy?
Thanks.

You can choose between a cruiser bar or a North Road bar, depending on the feel - wide or narrow.

Dimension Urban Cruiser Bar:

https://encrypted-tbn2.gstatic.com/s...ERdKk&usqp=CAE


Origin8 CitiClassique Tour:

http://images.jbi.bike/400/34143.jpg


Either one would turn your MTB into a comfort bike.

It would help to know (see, even) what you have on there now so we know what you are coming from.

Ditto, same challenge -- busted up back and neck with permanent C2 damage from a car wreck. Tried the original flat bars (actually very slightly curved) on my '92 Univega rigid mountain bike for a week last year. Couldn't handle the low and forward position for more than a few miles at a time.

I swapped bars with my Globe Carmel comfort hybrid, putting the 3" riser bars on the Univega. Perfect. Been riding it that way for seven months. It feels pretty much like Trek's sporty rigid fork hybrids I've tried at the local LBS. I ride it about 3-4 times a week, 10-60 miles per ride. As long as I get off and stretch about once an hour or every 10-20 miles, I'm good.

However I'm considering swapping albatross bars for the riser bars. A friend has put albatross bars on his hybrids and really likes 'em. He's more aerodynamic now and I have a little trouble keeping up with him on group rides. I noticed while following him his arms are tucked against his sides so his torso is catching less wind resistance than I do with riser bars.

Grip height would be about the same, near saddle height. Albatross bars are available in various rises or no rise at all. My only concern would be losing some turning radius and knocking my knees, but the swept back part of the albatross bars can be trimmed -- my friend cut about an inch off his.

I don't do any single track riding or trails that are so tight I'd need the advantage of wide flat or riser bars, so the albatross bars would suit me for comfort and add a bit of aero advantage. The slightly reduced reach would also reduce neck strain, which suits me.

I noticed last week my friend flipped the albatross bar on one bike, so he had a slightly more aero position. I doubt I'll do that since I'm already just marginally comfortable with my riser bars. But I'm not looking to be a speed demon, just gain a little advantage for our casual group rides and the windy, hilly rural routes I ride along open prairie. If it kicks me up from my usual 13-14 mph average to 15 with the same exertion, that'll be fine.

BTW, the flat (slightly curved) bar from my Univega MTB is now on my Globe Carmel comfort hybrid. The Globe has a long, straight quill stem with no extension or reach. The flat bar puts me just a bit forward yet is still comfortable. I rode it more often back in February after crashing and busting up some ribs. Very comfortable yet more efficient to pedal, especially uphill, than the original riser bars.

Have you thought about trying an adjustable stem..

Here is what I have on her now. Thank you for all your ideas. Greatly appreciate it.

Can you give us a side view to see the angle of the stem?

Speaking of the stem, being a threaded stem, can you raise it any?

Also, what kind or riding are you doing with this? Mountain biking, or riding mostly on the road?

I can no longer put weight/pressure on my left shoulder, so I just went whole hog, and switched from 2" MTB to 13" stingray. Sorry, no pic right now....