![]() |
So you don't have the time or energy to ride your bike these days yet you are doing all of this experimenting with bars? :foo:
|
Originally Posted by prj71
(Post 22265722)
So you don't have the time or energy to ride your bike these days yet you are doing all of this experimenting with bars? :foo:
The situstuon with my MTB will change as I'm moving to a more rural area this month. |
My only MTB is my old 26" XC race bike. Back in our prime (mine and the bike's), my typical setup was a 135 stem and narrow bars. In its currently set up as a singlespeed, and I went to a 100 stem with 630 bars, then to 80x720. It took me a bit to get used to, but I've found that I like the leverage of the longer bar for technical sections. If I was cruising non-technical paths, however, I would probably opt for the longer and narrower option, more like a road bike. FWIW, I have wide shoulders and prefer 44cm road bars.
|
I currently have my grips mounted at about 60cm wide on the felt and I like the way it feels.
I dont want to and can't rreally ride anything super technical, but in that case. Im sure going wider woukd help. |
I much prefer narrow bars for tight technical trails.
|
I may have finally reached my bar width limit.
After slowly creeping up from 560-580mm in the 90s to 750-780m in the last few years, I tried bumping up to 800mm on my FS bike. This is the first time I have ever gone 20mm wider and not been sold by the end of the first ride. It seems counterintuitive, but it is actually on the climbs that I really liked the extra width. In particular technical climbs where I am out of the saddle pushing a higher gear. I also liked it in the corners. It was the "just riding along" part that it seemed like it might be too wide. I'll give it another couple rides, and it I don't change my mind I'll go back to 780mm. |
Originally Posted by Kapusta
(Post 22261899)
When the vast majority experienced mountain bikers - even ones like me that started on sub-600mm bars - have gravitated towards bars 720 and up, you need to ask yourself what they are getting that you are missing.
I assure you that whatever trail it is that you think you are going to be hitting every tree, folks are riding 750mm bars on it without issue. |
Originally Posted by tendency
(Post 22289731)
Well, son, I been crushing gnarly, b****in' single track since the late 80s on bars that could double as a straw in my post ride mai thai they're so narrow. So I'm down w/ moisture: don't get these giant 'surf board' bars. I guess you need extra stability to make up for other defects in your skillz. and suspension? what's that? :50:
My new Specialized Stumpjumper has 780mm bars so that is what most people want to use. A 780mm bar can be easily shortened for those with short arms with little effort. It is after all a recreational activity and not something to get a swelled head over. |
Originally Posted by tendency
(Post 22289731)
Well, son, I been crushing gnarly, b****in' single track since the late 80s on bars that could double as a straw in my post ride mai thai they're so narrow. So I'm down w/ moisture: don't get these giant 'surf board' bars. I guess you need extra stability to make up for other defects in your skillz. and suspension? what's that? :50:
|
I got my bars cut to a about 600cm right now
. |
My MTBs have drop bars with a little bit of flare on them. They measure 44cm at the hoods and 49cm at the drops.
|
Originally Posted by wolfchild
(Post 22290294)
My MTBs have drop bars with a little bit of flare on them. They measure 44cm at the hoods and 49cm at the drops.
|
For me it depends on the discipline.
I used to run 725mm for my Reign, but I'm likely to update this to 760mm on the next bike (currently no fully for me :( ). My hardtail in comparison currently has 800mm, and its just too wide for open gravel, so I'll likely swap this back to 720mm, maybe even narrower... |
Originally Posted by Moisture
(Post 22290099)
I got my bars cut to a about 600cm right now
. |
Originally Posted by Moisture
(Post 22290330)
How does it feel? Do really narrow bars work fine on newer mtbs?
|
Originally Posted by prj71
(Post 22291283)
They work fine as long as you aren't trying to tackle single track trails. Buddy of mine tried this idea on his Specialized hard tail than complained about how crappy the bike handled on single track trail.
|
Guys,
I just took my handlebar right off. I mounted the brakes and shifter onto the top tube and I just hold onto the stem now. I can REALLY ride some tight single track trails now!! |
Originally Posted by Moisture
(Post 22295202)
600 or maybe up to 620mm is about the widest id want to go in terms of actually getting the bike through trees and what not on the narrow rail trails near my new house.
|
Lol...Narrow rail trails. :rolleyes:
|
I was running 700 for a long time but with the shorter stems, I slowly moved to 760 and then 780 which I have used for maybe 4 years now. I recently got an 800 but it has more sweep so it effectively 785-790 and I really like it. It is the most comfy one I have used so far. However, I am 6' tall with longish arms...6'3 span. Shoulders- not sure but I were a 42 jacket.
|
| All times are GMT -6. The time now is 01:16 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.