Trek Answers back on ZX
10-30-07, 06:01 PM
#1
Junior Member
Thread Starter
Join Date: Feb 2005
Posts: 16
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Trek Answers back on ZX
Many of us can remember the special Trek frames from the late 90's. It was a project with Easton. However they took a left turn at some point and some of us (like me) would want to know why they'd leave such a good frame since they are still highly sought after frames even now. So I emailed Trek and a gal replied to it. And it's a sad story in my opinion.
"Dear ###########,
In reference to your question about the Easton Project. May of these very desirable frames can still be found through the “used” sections in bike shops and on the web. The project was one of our finest feats. But it was also one of our failures at the same time. The margin of error wasn’t big enough to keep it going. For a good frame to go out and be bonded correctly to pass inspection, it had to be pretty much perfect. Thus with the level of quality needed, there were about 3 frames being made to every one that was made good enough to be made into a bike. The other problem we had was the warranty. The paint on that frame actually added strength to the frame. The paint bonded with the metal. When areas of paint were warn away from use, the frame would buckle and sometimes break. Those who tried to strip the frames for a repaint, found it very hard to remove in the later models. But by then it was too late and we moved our division out of Easton’s plant and settled happily in China where the quality is high on all levels. I hope this helps you with your question of “what happened to the Easton/Trek frame Project of the late 90’s?”
Thank You
############
Trek R&d"
"Dear ###########,
In reference to your question about the Easton Project. May of these very desirable frames can still be found through the “used” sections in bike shops and on the web. The project was one of our finest feats. But it was also one of our failures at the same time. The margin of error wasn’t big enough to keep it going. For a good frame to go out and be bonded correctly to pass inspection, it had to be pretty much perfect. Thus with the level of quality needed, there were about 3 frames being made to every one that was made good enough to be made into a bike. The other problem we had was the warranty. The paint on that frame actually added strength to the frame. The paint bonded with the metal. When areas of paint were warn away from use, the frame would buckle and sometimes break. Those who tried to strip the frames for a repaint, found it very hard to remove in the later models. But by then it was too late and we moved our division out of Easton’s plant and settled happily in China where the quality is high on all levels. I hope this helps you with your question of “what happened to the Easton/Trek frame Project of the late 90’s?”
Thank You
############
Trek R&d"
10-31-07, 06:02 AM
#3
Senior Member
Join Date: Dec 2005
Location: Atlanta, GA
Posts: 1,223
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
So I emailed Trek and a gal replied to it. And it's a sad story in my opinion.
"Dear ###########,
In reference to your question about the Easton Project. May of these very desirable frames can still be found through the “used” sections in bike shops and on the web. The project was one of our finest feats. But it was also one of our failures at the same time. The margin of error wasn’t big enough to keep it going. For a good frame to go out and be bonded correctly to pass inspection, it had to be pretty much perfect. Thus with the level of quality needed, there were about 3 frames being made to every one that was made good enough to be made into a bike. The other problem we had was the warranty. The paint on that frame actually added strength to the frame. The paint bonded with the metal. When areas of paint were warn away from use, the frame would buckle and sometimes break. Those who tried to strip the frames for a repaint, found it very hard to remove in the later models. But by then it was too late and we moved our division out of Easton’s plant and settled happily in China where the quality is high on all levels. I hope this helps you with your question of “what happened to the Easton/Trek frame Project of the late 90’s?”
Thank You
############
Trek R&d"
"Dear ###########,
In reference to your question about the Easton Project. May of these very desirable frames can still be found through the “used” sections in bike shops and on the web. The project was one of our finest feats. But it was also one of our failures at the same time. The margin of error wasn’t big enough to keep it going. For a good frame to go out and be bonded correctly to pass inspection, it had to be pretty much perfect. Thus with the level of quality needed, there were about 3 frames being made to every one that was made good enough to be made into a bike. The other problem we had was the warranty. The paint on that frame actually added strength to the frame. The paint bonded with the metal. When areas of paint were warn away from use, the frame would buckle and sometimes break. Those who tried to strip the frames for a repaint, found it very hard to remove in the later models. But by then it was too late and we moved our division out of Easton’s plant and settled happily in China where the quality is high on all levels. I hope this helps you with your question of “what happened to the Easton/Trek frame Project of the late 90’s?”
Thank You
############
Trek R&d"
Trek sold bonded aluminum frames with Easton tubing for nearly ten years. The last year for the bonded MTB frames was 1997. Trek just realized that the competition was enjoying obscene margins from Chinese made goods and wanted a piece of that action.
10-31-07, 10:41 AM
#5
Senior Member
Join Date: Dec 2005
Location: Atlanta, GA
Posts: 1,223
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Go here: https://www.vintage-trek.com/TrekBrochures.htm
They introduce their bonded aluminum frame in 1985, and started marketing the tubesets as Easton E9 series in the late '80s.
They introduce their bonded aluminum frame in 1985, and started marketing the tubesets as Easton E9 series in the late '80s.
10-31-07, 11:41 AM
#6
Fourth Degree Legend
Join Date: Jun 2005
Location: American Gardens Building
Posts: 3,826
Bikes: 2005 Kona Cinder Cone & 2010 Cannondale SuperSix
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
10-31-07, 01:12 PM
#7
Too Much Crazy
Join Date: Feb 2005
Location: NY
Posts: 3,660
Bikes: Eriksen 29er, Gunnar Roadie, Niner RLT, Niner RIP 9
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 116 Post(s)
Likes: 0
Liked 3 Times
in
2 Posts
Late nineties? i have other questions that need answering;
1. What ever happened to N'Sync?
2. whats the best use for my Y2k Bombshelter?
3. Will my cisco shares ever hit $80 again?
1. What ever happened to N'Sync?
2. whats the best use for my Y2k Bombshelter?
3. Will my cisco shares ever hit $80 again?
11-01-07, 07:32 AM
#8
Senior Member
Join Date: Mar 2006
Location: Novi, Michigan
Posts: 459
Bikes: Trek '06 2100ZR, 7.5FX, '05 Fuel EX8
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
But by then it was too late and we moved our division out of Easton’s plant and settled happily in China where the quality is high on all levels. I hope this helps you with your question of “what happened to the Easton/Trek frame Project of the late 90’s?”
Thank You
############
Trek R&d"
Thank You
############
Trek R&d"
11-01-07, 09:04 AM
#9
Banned
Join Date: Jul 2005
Location: Toronto & Wasaga Beach, Ontario, Canada
Posts: 964
Bikes: Ellsworth Id
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Hmmm...my daughter's first MTB was the 7600zx in the Trek anniversary colours. She loved that bike.
11-05-07, 08:34 AM
#10
New to the road
Join Date: Aug 2005
Location: CT during the school year/ DE during the summers!
Posts: 9
Bikes: Road is a Airborne
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
My first bike was a Trek 7000 ZX, the dragonfly green.. I miss that bike so much!!
11-06-07, 01:12 AM
#11
Junior Member
Thread Starter
Join Date: Feb 2005
Posts: 16
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
dude....I had the same bike color.....mine was stolen....I swear the ZX series climed better than the later 7000 models.....I just found on ebay a 96' 18 inch 7000 ZX frame. Bought it for 80 bucks....can't wait to build it up with my 2002 LX parts.
10-20-10, 12:00 PM
#12
Newbie
Join Date: Apr 2009
Location: Florence, Alabama
Posts: 3
Bikes: 1985 Schwinn Super Le Tour, 1988 Schwinn Prelude, 20?? S&W Tactical MTB
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
1997 zx 7000
After a lifetime of riding road bikes i bought my first MTN bike at age 59. A used (stored in a garage for 10 years) TREK ZX 7000. Tires were rotten cotton (Psychos...looked brand new!) I took it to mt LBS and had some Kenda K-Rads installed along with a general tuneup. The smallish 18" frame seemed too small for me but the bike shop guy said it would be fine. He said the frame was perfect. After 340 miles of flat trail and road riding I am completely blown away with this bike. I'll never go back to road bikes-this is way too much fun!
Here's my queston...should I upgrade the bike or save my money and invest in a more modern bike? I only paid 150 dollars for the Trek. i would appreciate any opinions / advice as I'm a complete newbie to MTN biking. Going forward, I'd like to try my hand at all terrain biking. Not looking to do downhill or aggressive...more like XC and touring. Thanks!
Here's my queston...should I upgrade the bike or save my money and invest in a more modern bike? I only paid 150 dollars for the Trek. i would appreciate any opinions / advice as I'm a complete newbie to MTN biking. Going forward, I'd like to try my hand at all terrain biking. Not looking to do downhill or aggressive...more like XC and touring. Thanks!
10-20-10, 03:37 PM
#13
Senior Member
Join Date: Jun 2008
Location: Pennsylvania and Colorado - Snowbird with bad sense of direction & humor... Retired now Ski Bum... My Ride - Montague - Paratrooper
Posts: 232
Bikes: Montague - Paratrooper
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
"Here's my queston...should I upgrade the bike or save my money and invest in a more modern bike?"
Yes do both. Sooner or later you will 'need' a new bike, just like the wife need new shoes.
Yes do both. Sooner or later you will 'need' a new bike, just like the wife need new shoes.
10-20-10, 04:50 PM
#14
15 minutes with you
Join Date: Jun 2009
Location: 92104
Posts: 85
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Here's my question: Does anyone at trek understand grammar?
"When areas of paint were warn away from use, the frame would buckle and sometimes break."
I hate when my paint gets warn out.
+1 to Junkyard's comment.
I had an old trek 8000 that i freakin' loved. I traded it for a bass guitar and amp. Dumbest trade for me (to date).
"When areas of paint were warn away from use, the frame would buckle and sometimes break."
I hate when my paint gets warn out.
+1 to Junkyard's comment.
I had an old trek 8000 that i freakin' loved. I traded it for a bass guitar and amp. Dumbest trade for me (to date).
04-05-17, 06:57 AM
#15
Senior Member
Join Date: Jul 2004
Location: northern michigan
Posts: 13,298
Bikes: '77 Colnago Super, '76 Fuji The Finest, '88 Cannondale Criterium, '86 Trek 760, '87 Miyata 712
Mentioned: 19 Post(s)
Tagged: 0 Thread(s)
Quoted: 656 Post(s)
Liked 567 Times
in
306 Posts
Many of us can remember the special Trek frames from the late 90's. It was a project with Easton. However they took a left turn at some point and some of us (like me) would want to know why they'd leave such a good frame since they are still highly sought after frames even now. So I emailed Trek and a gal replied to it. And it's a sad story in my opinion.
"Dear ###########,
In reference to your question about the Easton Project. May of these very desirable frames can still be found through the “used” sections in bike shops and on the web. The project was one of our finest feats. But it was also one of our failures at the same time. The margin of error wasn’t big enough to keep it going. For a good frame to go out and be bonded correctly to pass inspection, it had to be pretty much perfect. Thus with the level of quality needed, there were about 3 frames being made to every one that was made good enough to be made into a bike. The other problem we had was the warranty. The paint on that frame actually added strength to the frame. The paint bonded with the metal. When areas of paint were warn away from use, the frame would buckle and sometimes break. Those who tried to strip the frames for a repaint, found it very hard to remove in the later models. But by then it was too late and we moved our division out of Easton’s plant and settled happily in China where the quality is high on all levels. I hope this helps you with your question of “what happened to the Easton/Trek frame Project of the late 90’s?”
Thank You
############
Trek R&d"
"Dear ###########,
In reference to your question about the Easton Project. May of these very desirable frames can still be found through the “used” sections in bike shops and on the web. The project was one of our finest feats. But it was also one of our failures at the same time. The margin of error wasn’t big enough to keep it going. For a good frame to go out and be bonded correctly to pass inspection, it had to be pretty much perfect. Thus with the level of quality needed, there were about 3 frames being made to every one that was made good enough to be made into a bike. The other problem we had was the warranty. The paint on that frame actually added strength to the frame. The paint bonded with the metal. When areas of paint were warn away from use, the frame would buckle and sometimes break. Those who tried to strip the frames for a repaint, found it very hard to remove in the later models. But by then it was too late and we moved our division out of Easton’s plant and settled happily in China where the quality is high on all levels. I hope this helps you with your question of “what happened to the Easton/Trek frame Project of the late 90’s?”
Thank You
############
Trek R&d"
The above statement most likely was given by someone in the mailroom. Paint adding strength to the frame??
I just bought a '96 7000zx off CL for 60.00 and now giving it a new paint finish so I can safely ride this off the curb.
04-06-17, 05:59 AM
#16
Senior Member
https://www.cnbc.com/2014/08/01/in-wa...-bicycles.html
