looking for a new hub
 

im doing DH on a norco manik, i still have the original hubs, they're both cracked. I pushed up the fork to 8" so i need a hub mostly for my front tire with the (8" triple drop off 3)
i wont spend more than 100$ for my front
ps: doesnt need to be super light

BTW...thats just a standard QR...

Why not an LX hub mounted to a ryno lite. Should come in under 100$

BTW you do know that fork isn't 8"...it is 6ish...unless you mean you bumped THAT fork up?

wow Rayin your really puching those wheelsets eh? heh just playing, how exactly do you crack a hub?

Not really hard. Crap hubs are easy to crack...

Have a whiteindustries hub on my Bullit....thing is still mint after a year+, silent too. CK makes nice hubs, or Hadley.

You might want to try the hope xc or the hope bulb even more so. If you ever need a 20mm through axel you can convert the bulb hub..

For 100$?...where is that deal?

we are talking about hubs only right?
http://www.jensonusa.com/store/product.aspx?i=HU707B08

I figured it include the build cost...

This is the bike he has
http://www.norco.com/bikes/2004bikes/manik.htm
hope it helps you all to figure out whats wrong. He pushed up the for from 6" and a bit to 8" and doing some DH he cracked it... I went with him :)

k dudes im the fork is 6"travel, i know all that, but I set the hight at 8" and I cracked the tiny front hub, and my back hub. I really need the front one

less than 100$ for hub only!!

the bigger, the tuffer, the better, its for DH so i dont care about the weight + that fork weighs 1 tone

thanks

He's cdn, I'm guessing, meaning that the prices have to be about 70 USD or something. 1 CDN = 81 cents US I think.

If you need a 20mm hub, go with the Marzocchi one. There is absoluetly NO REASON to pay anything more for a simple milled out piece of metal. For a rear, standard axle. XT will last Hella longer than just about anything and is light to boot. But if you want beefy. Go with a Woodman rear hub. Those are the tits.

hahaha its not that expensive...!!