Really tried searching for a thread...didn't find it. Wearing in discs?
#1
Senior Member
Thread Starter
Join Date: Sep 2011
Location: Columbus, Ohio
Posts: 215
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Really tried searching for a thread...didn't find it. Wearing in discs?
I just bought a new MTB (see post your rigs) and am wondering about the discs on it. It stops fine but I read that new discs tend to wear in before they reach their max stopping power. Or is it just because the grease and stuff from customers touching all on it gets scrubbed off?
#2
Senior Member
Join Date: Aug 2006
Posts: 1,895
Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 184 Post(s)
Likes: 0
Liked 67 Times
in
53 Posts
Burnish – Brake power is generated by the friction material on the pads embedding into the surface of the rotor, re-bonding to the friction material still on the pads and then breaking apart or shearing. In order for this bonding/shearing to occur, the friction material must first be displaced onto the surface of the rotor. This typically happens during the first 10 – 50 stops of a brake system and is referred to as “burnishing” the rotor and pads. When a rotor is cleaned, it will need to be re-burnished again to re-deposit the friction material onto the surface.
More reading for you: https://www.hayesdiscbrake.com/hayes-u/
More reading for you: https://www.hayesdiscbrake.com/hayes-u/
#4
Redheaded Stepchild
Join Date: Apr 2010
Location: GA, USA
Posts: 1,912
Bikes: A fat tire & a skinny tire & two others I loaned out
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
For my motorcycle, my friend always told me to bring the bike to about 60mph, then brake hard down to overheat the pads, then let them cool off by slowly getting back to 60mph, repeat. I usually did this about 10 times & always notice the braking getting slightly better after doing so. I've always tried to do the same on my bike, just to a lesser degree since I can't get my MTB to 60mph.
#5
Dismember
Join Date: May 2005
Location: Dweeb
Posts: 215
Bikes: Jamis 2008 Komodo, 40's Malvern Star 16" my 1st! , 58 Malvern Star 28", (gave it to the LBS for display), Voodoo Wanga SS, Voodoo Bokor commuter, Wilier Triestina Lavaredo, Kojima Condor 80's resto roadie.
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
My Maguras' came with a manual that said I should brake hard from 30mph(!) at least Eight times to wear them in. I need to find a big hill around here.
__________________
Mmmmmm, shiney.
Mmmmmm, shiney.
Thread
Thread Starter
Forum
Replies
Last Post
blackarts11
General Cycling Discussion
16
12-18-17 09:22 PM