![]() |
Tubes or no tubes
Ok, mtn bike noob question on tires, what's better and why for a non serious rider, I ride a few times a month, single trac forest stuff.. I had a HR 29er sport and bought a CDale Of CL that I planned to flip on the bay, but after riding it I sold the hardrock.
The CDale has Stan's tubeless and I need tires, and not sure if I should stay tubeless or tubes. I dont ride any rock or roots on my typical loops. http://i201.photobucket.com/albums/a...7/abb03bf1.jpg |
I run tubeless on my main bicycle, tubes in all the others. I think if you want to have tubes, get them, they are awesome. if you want to be tubeless, get a tubeless set up, it's awesome. 6 of one, half dozen of the other. one is not better than the other.
however....lets do some armchair psychology, shall we? you asked if you should be tubeless, which means you are thinking it's a better idea and want confirmation from others to make sure you are making the right decision, which means deep down, you want tubeless. if you didn't, you wouldn't even consider it or ask, so... get the tubeless set up and never worry about it again... |
Originally Posted by pablosnazzy
(Post 14308163)
however....lets do some armchair psychology, shall we? you asked if you should be tubeless, which means you are thinking it's a better idea and want confirmation from others to make sure you are making the right decision, which means deep down, you want tubeless. if you didn't, you wouldn't even consider it or ask, so... get the tubeless set up and never worry about it again... I don't know the benifits of tubeless , I thought they were mostly for low pressure riding, slow technical stuff etc.. ? I guess I just don't know the benifits or maintenance issues with tubeless , my noobness to mtn tells me tires with tubes are a no brainier , same with tubeless ? |
how do you fix a flat with tubeless when you are out on the trails ?
|
Originally Posted by Surfer34
(Post 14308296)
how do you fix a flat with tubeless when you are out on the trails ?
In addition to being able to run a slightly lower tire pressure, the benefit to tubeless is you don't get flats, for the most part, and you don't have to be buying tubes all the time. the stan's sealant, which helps seal the tire to the rim, also seals any punctures. if you rip a sidewall, that's a different story. also, it's a bit lighter, but i would say 99% of riders wouldn't notice the difference or care. |
Originally Posted by Surfer34
(Post 14308296)
how do you fix a flat with tubeless when you are out on the trails ?
Thanks pabsnaz for the answers! Think I'll got with anouther set of tubeless and just keep a tube in my pack. Now the question is What tubeless tires? It has kenda nevegals now they are chewed and the tread is a bit worn so I couldn't really tell if I liked them when I rode. |
Originally Posted by madfx
(Post 14308408)
....
Now the question is What tubeless tires? It has kenda nevegals now they are chewed and the tread is a bit worn so I couldn't really tell if I liked them when I rode. |
Originally Posted by pablosnazzy
(Post 14308163)
you asked if you should be tubeless, which means you are thinking it's a better idea and want confirmation from others to make sure you are making the right decision, which means deep down, you want tubeless. if you didn't, you wouldn't even consider it or ask, so...
|
Originally Posted by madfx
(Post 14308143)
The CDale has Stan's tubeless and I need tires, and not sure if I should stay tubeless or tubes.
|
Tubeless vs tubed to me is about how much work you like to do on your bikes. If you don't like messing with you bike, I say stick with tubes. (I have tubed and tubeless set ups)
If you don't mind a little bike attention then get tubeless. Most people need an air compressor to seat a tubeless bead (extra toy for some folks). Or if you are lucky, a high volume floor pump may do it. Some people need to soap up the tire to seat it, a little messy. You need to add sealant into tubeless tires, anywhere from 3 months and up. I think mine was pretty dry after only 3 months. You can either unseat the tube to clean out the dried up "snot" or you can just take the valve out and and more sealant. I poke an old guitar string into the valve to see if any sealant still remains. So there is more work in the initial setup of tubeless, but if it helps you get less flats and you like the extra traction/cushness, that might negate all the work. On the flipside, I have used slime tubes and they have worked for me, especially in Southern California, with thorns. |
^^ thanks for this.. I was looking around online at tires and saw the slime tubes, your answer acually Helped answer my questions, I was also thinking of the maintenance with tubeless ... I'm just going tubes, I'll try the slimes. I don't like messing with my bikes, I'll do tire/tube changes re wrap bars etc and light duty adjustments but mostly I just bring my road bikes to the shop for tune and to adjust anything I can easily do myself in a few mins..
|
| All times are GMT -6. The time now is 01:21 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.