Bike Forums

Go Back  Bike Forums > Search Forums
Reload this Page >

Search Results

Register
FAQ
Calendar
Today's Posts
Search
Vendor Directory
Notices
Search: Posts Made By: numlok
Showing results 1 to 10 of 10
Search took 0.01 seconds.
Forum: Bicycle Mechanics
07-29-21, 09:43 PM
Replies: 19
Views: 1,768
Posted By krakhaus

You don't have enough spindle on the drive side....

You don't have enough spindle on the drive side. You'll either need to adjust it out, or get a longer spindle.
Forum: Bicycle Mechanics
07-29-21, 11:42 AM
Replies: 19
Views: 1,768
Posted By trailangel

Maybe you bought a BB with the wrong taper. Or...

Maybe you bought a BB with the wrong taper. Or your crank spiker has been pushed on too many times... too far. Can you show a picture of the crank installed tightly torqued on the BB with the bolt...
Forum: Bicycle Mechanics
07-29-21, 08:35 AM
Replies: 19
Views: 1,768
Posted By 79pmooney

numlok. how much clearance do you have between...

numlok. how much clearance do you have between the left crank and the chainstay? (Crank on properly tight.) You need ~2mm so you don't hit the chainstay even doing massive sprints or hillclimbs. ...
Forum: Bicycle Mechanics
07-29-21, 08:05 AM
Replies: 19
Views: 1,768
Posted By ThermionicScott

You left off a letter,...

You left off a letter, https://imgur.com/a/yQcIcTJ works :thumb:

Meanwhile, I'm having trouble believing that the act of mounting the crank is causing the BB to bind. If the crank spider is coming...
Forum: Bicycle Mechanics
07-29-21, 07:56 AM
Replies: 19
Views: 1,768
Posted By Charliekeet

numlok , create an album - people can view photos...

numlok , create an album - people can view photos in your profile.
Forum: Bicycle Mechanics
07-29-21, 02:00 AM
Replies: 19
Views: 1,768
Posted By JoeTBM

Nope https://imgur.com/a/yQcIcT, doesn't come up

Nope https://imgur.com/a/yQcIcT, doesn't come up
Forum: Bicycle Mechanics
07-28-21, 09:51 PM
Replies: 19
Views: 1,768
Posted By 79pmooney

Sounds like an older crankset that has been...

Sounds like an older crankset that has been removed and re-installed a few (or many) times. Each time, the taper flats of the crank get pushed out a touch farther so the crank has to slide on more to...
Forum: Bicycle Mechanics
07-28-21, 09:40 PM
Replies: 19
Views: 1,768
Posted By Rick

Send pictures

Send pictures
Forum: Bicycle Mechanics
07-28-21, 09:26 PM
Replies: 19
Views: 1,768
Posted By Russ Roth

You mention you followed Phil's instruction, if...

You mention you followed Phil's instruction, if this is their style did you put the spindle in backwards? The drive side will typically stick out longer due to the gears and putting it in backwards...
Forum: Bicycle Mechanics
07-28-21, 09:21 PM
Replies: 19
Views: 1,768
Posted By sch

Could you have bottomed out the crank against the...

Could you have bottomed out the crank against the BB shell or the cup? Phil BB are adjustable R<->L and the
spindle may be a bit too far to L. Also which crank and which BB are you using,...
Showing results 1 to 10 of 10


 
Forum Jump

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.