Originally Posted by lebowitz
I just bought an ITM Open 800 road stem and it bottoms out in my fork at just about the minimum insertion mark. I want to get it quite a bit lower, so I think I need to use a hack saw.
Does anyone own a vice and hacksaw so that I might do some hacking? Not knowing the entire ITM product line. It appears from what you wrote that you have a threaded fork & head set. Unless you mated a very small frame with a fork (with a steerer tube that is butted) barrowed from a bigger bike, there really should not be anything keeping you from inserting the stem properly. Try cleaning the inside of the steerer tube. If however, this is not the problem, PM or AIM. |
eeek!!!!
(hacksaws and good intentions...) |
if y'all are still riding at midnight, gimme a call.
|
Originally Posted by chimblysweep
if y'all are still riding at midnight, gimme a call.
|
I BETTER SEE SOME PIRATES AT THIS SLAUGHTERAMA.... I HEARD YOU WERE A FRIENDLYDRINKING GROUP WITH A BIKING PROBLEM... well SLAUGHTERAMA is simply a day of biking for alcoholics. LETS GET DRUNK AND RIDE TOGETHER...... you should be here...
-Friday- Scavanger Hunt -Saturday- Polo Foot Down Jousting 6pack circle race-did it last time, hopefully we will have a repeat Its an all together day of drinking riding and fellowshipping. ..... |
I know I'll be too lazy to clean up my bike after riding in the wet tonight, so I've decided to skip on the shenaneghans tonight. I'll toss some century miles on the trainer instead. Unfortunately, the Richmond run's out too ... I already promised my friend in Baltimore that I'd fix her computer Saturday :(
CM in two weeks? Excited to see the flags come out. |
leb, get some grease. Lube seems to solution for most of life's problems.
|
Originally Posted by chimblysweep
if y'all are still riding at midnight, gimme a call.
|
you called at 130 and i have a flight at 7am. sorry, twas too late for this (forced to be) early bird.
|
Originally Posted by poopncow
Leb dude, think you may have a design problem that a hack saw will not fix. What are you going to saw off?
Not knowing the entire ITM product line. It appears from what you wrote that you have a threaded fork & head set. Unless you mated a very small frame with a fork (with a steerer tube that is butted) barrowed from a bigger bike, there really should not be anything keeping you from inserting the stem properly. Try cleaning the inside of the steerer tube. If however, this is not the problem, PM or AIM. I was thinking about cutting the bottom of the stem off, up to the minimum insertion point, so that it would sink deeper. OK - When I get home from work tonight I will take your suggestion and clean out the inside of the steerer tube as much as possible. If that doesn't work, I'm going to post measurements and pictures to make this clearer and also try to figure out what's stopping the stem from entering all the way (butting or some obstruction). The steel stem and bike are both fuji, but I'm not the original owner so I don't know about past par recombinations Thanks maties for your suggestions. I'm going to be at the next critical mass. arrrrrrrrrrrrrrrr |
Originally Posted by spud
Tink's reggaetron band, featuring Jessie and That Guy Who Hated Being Photographed.
http://static.flickr.com/34/73916827_40601e3b72.jpg Tink, hope we didn't get you in trouble with our shenanegans. Fun ride, even tho 'twas more drink than ride. |
ok tonite Cardozo Track Hot Nights!
Meet at 7:30 @ Kenny's Alley (across from 12th Pl & Constitution NE) if thats too hard to find just get over to Linkin Park and call me or Kenny. We'll leave for the track around 8. No drinking at the track! so drink up ahead of time. Bring Beer/Sparks, Bring Friends. |
oh my god jesse was too much fun last night.
what a man what a man and what i want to know, is how exactly you guys found out about my raggaeton band!? i though i was playing it safe,, but no! you found me anyways. ***** Alright so now i'm really excited. I can't wait to see what this year's shirt is going to look like. I was thinking maybe john could take the 4 finalists of what we choose, and then create a new poll thread with a heading that says something like "help the pirates choose their new T-shirt" it would be good visibility and kinda fun to get the whole forum invovled. Naturally we wouldn't have to go with what they decided, but it would be interesting to hear suggestions from non-pirates. deal or no deal? http://images.usatoday.com/life/_pho...alornodeal.jpg |
Originally Posted by spud
ok tonite Cardozo Track Hot Nights!
Meet at 7:30 @ Kenny's Alley (across from 12th Pl & Constitution NE) if thats too hard to find just get over to Linkin Park and call me or Kenny. We'll leave for the track around 8. No drinking at the track! so drink up ahead of time. Bring Beer/Sparks, Bring Friends. |
Originally Posted by lebowitz
Yes, it's a threaded stem.
I was thinking about cutting the bottom of the stem off, up to the minimum insertion point, so that it would sink deeper. |
Originally Posted by VCURFCwinger14
I BETTER SEE SOME PIRATES AT THIS SLAUGHTERAMA.... .....
but looking forward to "Hills of Yarrington" on Sunday. |
Question: Who is interested...seriously about riding the 5 buro tour? It is the first sunday in May and registration fee is above 40USD. but I like riding it and others may find it interesting too.
|
What's the general pirate consensus regarding $20 conversions and DFL? I ain't sure I'm up for racing at the moment but I would like to meet some veloci-peeps.
Where's the actual track, 13th and Florida NW? That or 1st and N NW I'd guess. |
dave, sure i think we may as well let people vote on all the design entries.
zack, DFL? its track racing not an alleycat. suicide hubs arent the best idea, we have no requirement for your bike to be fixed, except for the slow races. |
Originally Posted by tink20seven
Alright so now i'm really excited.
I can't wait to see what this year's shirt is going to look like. I was thinking maybe john could take the 4 finalists of what we choose, and then create a new poll thread with a heading that says something like "help the pirates choose their new T-shirt" it would be good visibility and kinda fun to get the whole forum invovled. Naturally we wouldn't have to go with what they decided, but it would be interesting to hear suggestions from non-pirates. deal or no deal? |
NO DEAL! just because that's what I ALWAYS yell.
|
Originally Posted by lebowitz
Yes, it's a threaded stem.
I was thinking about cutting the bottom of the stem off, up to the minimum insertion point, so that it would sink deeper. OK - When I get home from work tonight I will take your suggestion and clean out the inside of the steerer tube as much as possible. If that doesn't work, I'm going to post measurements and pictures to make this clearer and also try to figure out what's stopping the stem from entering all the way (butting or some obstruction). The steel stem and bike are both fuji, but I'm not the original owner so I don't know about past par recombinations Thanks maties for your suggestions. I'm going to be at the next critical mass. arrrrrrrrrrrrrrrr |
Originally Posted by poopncow
Question: Who is interested...seriously about riding the 5 buro tour? It is the first sunday in May and registration fee is above 40USD. but I like riding it and others may find it interesting too.
|
Originally Posted by tink20seven
Naturally we wouldn't have to go with what they decided.
|
Originally Posted by Rincewind8
Since when do pirates stick to rules?
|
All times are GMT -6. The time now is 07:35 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.