![]() |
Pedal Recomendation
I'm considering trying a different pedal other than the Shimano M-520. I don't know why, because I'm pretty much used to them, and I can ";click in" pretty much in my sleep. However, I like to browse around, and I spotted the Shimano PD-ED500, and they look pretty good to me. There are other brands out there as well, so I was just looking for some opinions in general.
Thanks, Paul |
I have VP VX Race pedals. I got lucky when someone on ebay was selling them for $25 and bought three pairs. The VX 6000 is similar to the ED500's, but they're much nicer with stainless axles, machined body on the sides that doesn't get scratched up and they're about 50g lighter. And cheaper.
https://www.ebay.com/itm/VP-VX-6000-...5.c10#viTabs_0 |
Pretty much of a downgrade in terms of weight.
The difference between those and something light is like strapping an inner tube to each foot. |
The weight difference of pedals will have no effect on your speed unless perhaps you're competing for the yellow jersey in the TDF.
|
I use Speedplay Zero for the road and Speedplay Frogs for my 'Cross bike. Have used them for the past 15 years and I like them a lot. Obviously.
|
Originally Posted by E53
(Post 20493566)
I'm considering trying a different pedal other than the Shimano M-520. I don't know why, because I'm pretty much used to them, and I can ";click in" pretty much in my sleep. However, I like to browse around, and I spotted the Shimano PD-ED500, and they look pretty good to me. There are other brands out there as well, so I was just looking for some opinions in general.
Thanks, Paul I have used the double sided SPD's for decades, so I was looking for something a little lighter, and these do the trick. What I like about them is that the axles on both pedals are slightly stiff, so they stay in place as you're pushing down with the other foot. If you practice enough, you can clip back in without looking, because the position of the pedal stays the same as the crank arm turns over. The original SPD's are not perfect, but the fact I can walk for miles in them if need be is a huge selling point for me. |
Originally Posted by E53
(Post 20493566)
I'm considering trying a different pedal other than the Shimano M-520. I don't know why, because I'm pretty much used to them, and I can ";click in" pretty much in my sleep. However, I like to browse around, and I spotted the Shimano PD-ED500, and they look pretty good to me. There are other brands out there as well, so I was just looking for some opinions in general.
Thanks, Paul |
Originally Posted by Lazyass
(Post 20494591)
The weight difference of pedals will have no effect on your speed unless perhaps you're competing for the yellow jersey in the TDF.
Physics is different in the TDF? |
Originally Posted by woodcraft
(Post 20497052)
Physics is different in the TDF?
|
I switched from M-520 SPD pedals to Shimano 105 SPD-SL pedals upon my most recent shoe replacement. I liked M-520s, but felt that it was time to embrace the way of the road cyclist -- certainly there must be some advantage to the more road-oriented pedals and shoes.
My shoes are lighter than before, my pedals and clips are a little heavier, so that's roughly a wash. The float seems slightly less than I had before. The contact platform is larger, and despite the old SPD-oriented shoes being slightly stiffer than my newer road shoes, I have less trouble with hot-spots on long rides using the SPD-SL pedals. I am still a little prone to missing the click-in when I start up a hill from a traffic light. But since the platform is larger I'm less likely to slip off the pedal and bash my leg when I miss a click-in -- I can keep pedaling through the intersection and click-in at a less stressful moment :). Overall I'm happy with having made the switch over to SPD-SL from SPD. I would even say walking in the SPD-SL shoes isn't as bad as I had expected it to be. |
Originally Posted by rumrunn6
(Post 20496846)
new cleated rider here. I'm curious what attracts you to these pedals. I don't want to assume why
|
ordered some Funn Mamba's & some cleat wedges ... hope they're fun! (& alleviate my hot spot)
|
| All times are GMT -6. The time now is 01:33 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.