Go Back  Bike Forums > Bike Forums > Road Cycling
Reload this Page >

No longer inspecting frames for crash damage

Notices
Road Cycling “It is by riding a bicycle that you learn the contours of a country best, since you have to sweat up the hills and coast down them. Thus you remember them as they actually are, while in a motor car only a high hill impresses you, and you have no such accurate remembrance of country you have driven through as you gain by riding a bicycle.” -- Ernest Hemingway

No longer inspecting frames for crash damage

Old 05-29-19, 06:44 PM
  #1  
Senior Member
Thread Starter
 
Join Date: Nov 2012
Posts: 4,435
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 1726 Post(s)
Liked 1,350 Times in 705 Posts
No longer inspecting frames for crash damage

Our shop is no longer inspecting frames for crash damage. It started with a carbon frame that harbored a crack for 3 months and then it catastrophically failed in the down tube. We never experienced that before with aluminum or steel frames, so now we simply decline crash damage inspections for all frames. We tell them to contact the manufacturer or if it is one of ours we will contact the maker for them.
TiHabanero is offline  
Likes For TiHabanero:
Old 05-29-19, 06:55 PM
  #2  
Senior Member
 
carlos danger's Avatar
 
Join Date: Nov 2017
Location: the danger zone!
Posts: 514

Bikes: steel is real. and so is Ti...

Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 216 Post(s)
Liked 24 Times in 19 Posts
And you are proud of this?

of course you should inspect frames. and charge the customer accordingly.

Sure you can only do a visual inpection, but you should still do it. Because if the "customer" comes to you he is even more clueless than you are.

And he is the person you make your money from!! so do you want to alienate your money stream?
carlos danger is offline  
Old 05-29-19, 07:15 PM
  #3  
Expired Member
 
shelbyfv's Avatar
 
Join Date: Jun 2007
Location: TN
Posts: 11,456
Mentioned: 37 Post(s)
Tagged: 0 Thread(s)
Quoted: 3637 Post(s)
Liked 5,314 Times in 2,700 Posts
Makes perfect sense in today's world. You can't know if the frame is OK so why risk a guess?
shelbyfv is offline  
Old 05-29-19, 07:27 PM
  #4  
Senior Member
 
noodle soup's Avatar
 
Join Date: Nov 2015
Posts: 8,922
Mentioned: 20 Post(s)
Tagged: 0 Thread(s)
Quoted: 4717 Post(s)
Liked 1,882 Times in 998 Posts
What is the name of the shop?
noodle soup is offline  
Old 05-29-19, 07:33 PM
  #5  
On Your Left
 
GlennR's Avatar
 
Join Date: Nov 2011
Location: Long Island, New York, USA
Posts: 8,373

Bikes: Trek Emonda SLR, Sram eTap, Zipp 303

Mentioned: 34 Post(s)
Tagged: 0 Thread(s)
Quoted: 3004 Post(s)
Liked 2,433 Times in 1,187 Posts
Inspecting frames is a liability issue. So unless you can do a "professional" examination, you're better off leaving it to others.

When I damaged my carbon frame I asked 3 different shops and all 3 gave me their "unprofessional" opinion and of course, nothing in writing.
GlennR is offline  
Likes For GlennR:
Old 05-29-19, 07:38 PM
  #6  
Senior Member
 
Join Date: Jul 2007
Location: South shore, L.I., NY
Posts: 6,825

Bikes: Flyxii FR322, Cannondale Topstone, Miyata City Liner, Specialized Chisel, Specialized Epic Evo

Mentioned: 18 Post(s)
Tagged: 0 Thread(s)
Quoted: 3185 Post(s)
Liked 2,020 Times in 1,158 Posts
Originally Posted by TiHabanero
Our shop is no longer inspecting frames for crash damage. It started with a carbon frame that harbored a crack for 3 months and then it catastrophically failed in the down tube. We never experienced that before with aluminum or steel frames, so now we simply decline crash damage inspections for all frames. We tell them to contact the manufacturer or if it is one of ours we will contact the maker for them.
If they contact the manufacturer, I assume they will in turn tell the customer to deal with the shop where it was purchased.

I assume at that point the customers only recourse is to have that shop disassemble the bike and return to the manufacturer for inspection. If it passes, it gets sent back to be reassembled. $200 all told ?. Or gets sent back for the customers choice to use/discard/fix. Or maybe a biggie like Trek pulls a “if you send to us for inspection and it fails, we destroy the frame” policy. A CYA policy.

In truth and short of ultrasound or CAT scan, X-Ray, etc.... it’s a bit of a crapshoot for a shop to inspect a carbon frame and declare it to be sound, when in reality you can’t tell what’s really going on under the paint.
Steve B. is offline  
Likes For Steve B.:
Old 05-29-19, 07:49 PM
  #7  
Senior Member
 
carlos danger's Avatar
 
Join Date: Nov 2017
Location: the danger zone!
Posts: 514

Bikes: steel is real. and so is Ti...

Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 216 Post(s)
Liked 24 Times in 19 Posts
Now when thinking about it TiHabanero I think you should simply destroy all the frames/bikes on the spot that the owner wants tested. better safe than sorry right.
carlos danger is offline  
Old 05-29-19, 08:00 PM
  #8  
Me duelen las nalgas
 
canklecat's Avatar
 
Join Date: Aug 2015
Location: Texas
Posts: 13,522

Bikes: Centurion Ironman, Trek 5900, Univega Via Carisma, Globe Carmel

Mentioned: 199 Post(s)
Tagged: 0 Thread(s)
Quoted: 4559 Post(s)
Liked 2,798 Times in 1,798 Posts
Seems reasonable. You'd need diagnostic imaging equipment to properly inspect a carbon fiber frame.
canklecat is offline  
Likes For canklecat:
Old 05-29-19, 08:06 PM
  #9  
Senior Member
 
Join Date: Jul 2007
Location: South shore, L.I., NY
Posts: 6,825

Bikes: Flyxii FR322, Cannondale Topstone, Miyata City Liner, Specialized Chisel, Specialized Epic Evo

Mentioned: 18 Post(s)
Tagged: 0 Thread(s)
Quoted: 3185 Post(s)
Liked 2,020 Times in 1,158 Posts
Originally Posted by carlos danger
Now when thinking about it TiHabanero I think you should simply destroy all the frames/bikes on the spot that the owner wants tested. better safe than sorry right.
Let’s think about that a bit.

How exactly does the LBS inspect a carbon frame ?.

Customer A comes in and says “I had a small accident and want to know if the frame is OK to ride ?”. I assume the shop might completely clean the frame so as to better be able to look at the frame in detail. They spot no obvious cracks or deformities, do the nickel tap, still looks OK, so they tell the customer the frame seems to be OK, but to CYA state “to the best of our ability”, with, and as Oldnsw stated with nothing in writing. Maybe the shop calls manufacturer Z who trusts the shop based on prior experience. Don’t know if that happens, Tihabanaro could chime in on that.

200 miles later the fork fails and the customer correctly or not, blames the shop.

I think in in this scenario and if I owned an LBS I’d tell the customer that only the manufacturer can accurately determine if the frame is OK.

Makes sense ?. Blame our litigious society, not the shop who cannot afford a lawsuit.
Steve B. is offline  
Likes For Steve B.:
Old 05-29-19, 08:22 PM
  #10  
Senior Member
 
carlos danger's Avatar
 
Join Date: Nov 2017
Location: the danger zone!
Posts: 514

Bikes: steel is real. and so is Ti...

Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 216 Post(s)
Liked 24 Times in 19 Posts
Originally Posted by Steve B.
Let’s think about that a bit.

How exactly does the LBS inspect a carbon frame ?.
the 4lb hammer test??

-------------

to be honest this is just another reason to avoid carbon like the F-ing plague (that it is).

steel is real.

customer comes in wondering if the steel frame is cracked?? well do you see a crack?? no? well then its not cracked. good day sir!
carlos danger is offline  
Likes For carlos danger:
Old 05-29-19, 08:50 PM
  #11  
Senior Member
 
Join Date: Jul 2007
Location: South shore, L.I., NY
Posts: 6,825

Bikes: Flyxii FR322, Cannondale Topstone, Miyata City Liner, Specialized Chisel, Specialized Epic Evo

Mentioned: 18 Post(s)
Tagged: 0 Thread(s)
Quoted: 3185 Post(s)
Liked 2,020 Times in 1,158 Posts
Originally Posted by carlos danger
the 4lb hammer test??

-------------

to be honest this is just another reason to avoid carbon like the F-ing plague (that it is).

steel is real.

customer comes in wondering if the steel frame is cracked?? well do you see a crack?? no? well then its not cracked. good day sir!
Complete BS. Not unheard of for steel to develop rust under the paint, not unheard of for that same frame to suddenly fail. Same with aluminum. Maybe the only materials that avoids hidden issues is unpainted titanium or aluminum.
Steve B. is offline  
Likes For Steve B.:
Old 05-29-19, 09:10 PM
  #12  
Senior Member
 
Join Date: Jul 2008
Location: O'Fallon, MO
Posts: 167

Bikes: Motobecane Strada Ltd. 1.0

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 8 Post(s)
Liked 1 Time in 1 Post
Originally Posted by Steve B.
Let’s think about that a bit.

How exactly does the LBS inspect a carbon frame ?.

Customer A comes in and says “I had a small accident and want to know if the frame is OK to ride ?”. I assume the shop might completely clean the frame so as to better be able to look at the frame in detail. They spot no obvious cracks or deformities, do the nickel tap, still looks OK, so they tell the customer the frame seems to be OK, but to CYA state “to the best of our ability”, with, and as Oldnsw stated with nothing in writing. Maybe the shop calls manufacturer Z who trusts the shop based on prior experience. Don’t know if that happens, Tihabanaro could chime in on that.

200 miles later the fork fails and the customer correctly or not, blames the shop.

I think in in this scenario and if I owned an LBS I’d tell the customer that only the manufacturer can accurately determine if the frame is OK.

Makes sense ?. Blame our litigious society, not the shop who cannot afford a lawsuit.
Bingo. Last guy that touched it is to blame unfortunately. Not always rightly but in the mind of the customer, the guy that touched it last must have broken it/missed something etc. In the car electronics world, we like to call this "The Ever Since Club" IE Ever since you put my new radio in, my tires are flat. I know if I was one of these shops I wouldn't want someone coming back to me because their carbon frame failed catastrophically going 30mph and now they have brain damage because of it.
BassManNate is offline  
Old 05-29-19, 09:12 PM
  #13  
Senior Member
 
Join Date: Aug 2018
Location: Rt 12 Washington USA
Posts: 458

Bikes: 2013 Ridley Helium, 2017 Blue Pro-Secco EX, 1987 Schwinn Super Sport

Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 211 Post(s)
Liked 101 Times in 73 Posts
The way to approach this is to get an ultrasound machine at the shop, charge 150.00.

Have the customer sign a document stating "this shop is capable of finding most types of damage to carbon fiber frames but they cannot guarantee that there is no "hidden" damage to an inspected frame. They can determine certain types of frame damage and upon detecting that type of damage will let the customer know that a frame is unsafe to ride. The shop cannot be held liable for damage to a frame that is undetected."

Have a lawyer do the word smithing.
Wilmingtech is offline  
Old 05-29-19, 10:04 PM
  #14  
Senior Member
 
Join Date: Jul 2007
Location: South shore, L.I., NY
Posts: 6,825

Bikes: Flyxii FR322, Cannondale Topstone, Miyata City Liner, Specialized Chisel, Specialized Epic Evo

Mentioned: 18 Post(s)
Tagged: 0 Thread(s)
Quoted: 3185 Post(s)
Liked 2,020 Times in 1,158 Posts
Originally Posted by Wilmingtech
The way to approach this is to get an ultrasound machine at the shop, charge 150.00.

Have the customer sign a document stating "this shop is capable of finding most types of damage to carbon fiber frames but they cannot guarantee that there is no "hidden" damage to an inspected frame. They can determine certain types of frame damage and upon detecting that type of damage will let the customer know that a frame is unsafe to ride. The shop cannot be held liable for damage to a frame that is undetected."

Have a lawyer do the word smithing.
You could just use that last sentence and skip buying the ultra sound machine. You’d still be sued.
Steve B. is offline  
Old 05-29-19, 10:08 PM
  #15  
Senior Member
 
Join Date: Jun 2013
Location: Sacramento, CA
Posts: 849
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 129 Post(s)
Liked 54 Times in 25 Posts
That's what we did at the shop I worked at.

If you brought in a carbon frame with perceived carbon damaged we partnered with an area carbon repair shop and gave the customer a few options:

1.) If you bought the frame from us we'd strip it down and prepare it for shipping free of charge, we'd also build it back up after the repair / clean bill of health.
2.) Otherwise we'd charge our normal fee, if the bike was not purchased from us.

But we absolutely would not perform the service on-site. I don't recall what specific documents were signed, but I know there was more than one (I worked in sales, this was a service department offering). In my 3+ years at the shop, maybe two people took us up on the offer. All the others just paid for a whole frame replacement. In at least 5 of those cases (that I specifically remember) the frame had obvious, catastrophic carbon damage.
softreset is offline  
Old 05-29-19, 10:21 PM
  #16  
Senior Member
 
Seattle Forrest's Avatar
 
Join Date: Mar 2010
Location: Seattle, WA
Posts: 23,208
Mentioned: 89 Post(s)
Tagged: 0 Thread(s)
Quoted: 18883 Post(s)
Liked 10,645 Times in 6,054 Posts
Originally Posted by carlos danger
Now when thinking about it TiHabanero I think you should simply destroy all the frames/bikes on the spot that the owner wants tested. better safe than sorry right.
They should just flip a coin. Heads they tell the customer to ride it, tails they say no way
Seattle Forrest is offline  
Old 05-29-19, 10:30 PM
  #17  
Senior Member
 
Join Date: Oct 2009
Posts: 2,853
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 1067 Post(s)
Likes: 0
Liked 259 Times in 153 Posts
But how many undamaged frames would fail an ultra sound test?
Manufacturing flaws, defects, voids etc.
Dean V is offline  
Old 05-29-19, 10:41 PM
  #18  
Senior Member
 
Join Date: Aug 2018
Location: Rt 12 Washington USA
Posts: 458

Bikes: 2013 Ridley Helium, 2017 Blue Pro-Secco EX, 1987 Schwinn Super Sport

Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 211 Post(s)
Liked 101 Times in 73 Posts
Originally Posted by Dean V
But how many undamaged frames would fail an ultra sound test?
Manufacturing flaws, defects, voids etc.
Thats where the money is. Out of warranty frames with manufacturing flaws. Let me show you the frames we do have. These Giants over here come with a 2 year no questions asked warranty...
Wilmingtech is offline  
Old 05-30-19, 01:12 AM
  #19  
Senior Member
 
Racing Dan's Avatar
 
Join Date: Aug 2015
Posts: 2,224
Mentioned: 9 Post(s)
Tagged: 0 Thread(s)
Quoted: 1332 Post(s)
Liked 316 Times in 214 Posts
Originally Posted by Steve B.
You could just use that last sentence and skip buying the ultra sound machine. You’d still be sued.
Yeah. Its not about "winning" the lawsuit. Its about not getting sued in the first place.
Racing Dan is offline  
Old 05-30-19, 05:37 AM
  #20  
Senior Member
 
indyfabz's Avatar
 
Join Date: Jan 2010
Posts: 39,055
Mentioned: 210 Post(s)
Tagged: 1 Thread(s)
Quoted: 18319 Post(s)
Liked 15,288 Times in 7,227 Posts
Originally Posted by Steve B.
Complete BS. Not unheard of for steel to develop rust under the paint, not unheard of for that same frame to suddenly fail.
+1. My old Trek 660 developed a rust crack in the head tube so I relegated it to the trainer. During one workout the drive side chain stay snapped completely through, also due to corrosion. Glad it didn't happen while I was on the road.
indyfabz is offline  
Old 05-30-19, 07:17 AM
  #21  
Senior Member
 
Join Date: Sep 2008
Location: NE Tennessee
Posts: 917

Bikes: Giant TCR/Surly Karate Monkey/Foundry FireTower/Curtlo Tandem

Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 169 Post(s)
Liked 84 Times in 62 Posts
If I owned a shop and someone wanted a carbon bike inspected and given a clean bill of health, I would send it out for a professional analysis. If a shop says that it is okay and there is a catastrophic failure, then the shop can be held to some degree of liability. If a lawsuit would follow, the shop would end up with attorney fees and if they lose the judgement, likely the shop.

There is a thread up in A&S of a similar nature.
bakerjw is offline  
Old 05-30-19, 07:21 AM
  #22  
Tortoise Wins by a Hare!
 
AlmostTrick's Avatar
 
Join Date: Feb 2006
Location: Looney Tunes, IL
Posts: 7,398

Bikes: Wabi Special FG, Raleigh Roper, Nashbar AL-1, Miyata One Hundred, '70 Schwinn Lemonator and More!!

Mentioned: 22 Post(s)
Tagged: 0 Thread(s)
Quoted: 1549 Post(s)
Liked 941 Times in 504 Posts
I don't blame your shop for its decision. It is a wise one. If I had a shop that would be my policy too.

The good news is that BF members can still post a thread with pics of their CF damage (or the details of the crash if potential damage is hidden) to get the "safe to ride" A-ok.
AlmostTrick is offline  
Old 05-30-19, 11:49 AM
  #23  
On Your Left
 
GlennR's Avatar
 
Join Date: Nov 2011
Location: Long Island, New York, USA
Posts: 8,373

Bikes: Trek Emonda SLR, Sram eTap, Zipp 303

Mentioned: 34 Post(s)
Tagged: 0 Thread(s)
Quoted: 3004 Post(s)
Liked 2,433 Times in 1,187 Posts
Originally Posted by AlmostTrick
The good news is that BF members can still post a thread with pics of their CF damage (or the details of the crash if potential damage is hidden) to get the "safe to ride" A-ok.
You forgot the eyeroll.

Trusting strangers on the interweb to tell you if a bike frame is safe is_______

You can fill in the word.
GlennR is offline  
Old 05-30-19, 11:58 AM
  #24  
Senior Member
 
noodle soup's Avatar
 
Join Date: Nov 2015
Posts: 8,922
Mentioned: 20 Post(s)
Tagged: 0 Thread(s)
Quoted: 4717 Post(s)
Liked 1,882 Times in 998 Posts
There's nothing really newsworthy here. Most shops in my area refer people to a CF repair shop for analysis.
noodle soup is offline  
Old 05-30-19, 12:37 PM
  #25  
Senior Member
 
indyfabz's Avatar
 
Join Date: Jan 2010
Posts: 39,055
Mentioned: 210 Post(s)
Tagged: 1 Thread(s)
Quoted: 18319 Post(s)
Liked 15,288 Times in 7,227 Posts
Originally Posted by oldnslow2
You forgot the eyeroll.

Trusting strangers on the interweb to tell you if a bike frame is safe is_______

You can fill in the word.
The word I would choose would be censored.
indyfabz is offline  

Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.