Go Back  Bike Forums > Bike Forums > Road Cycling
Reload this Page >

The best bar tape

Notices
Road Cycling ďIt is by riding a bicycle that you learn the contours of a country best, since you have to sweat up the hills and coast down them. Thus you remember them as they actually are, while in a motor car only a high hill impresses you, and you have no such accurate remembrance of country you have driven through as you gain by riding a bicycle.Ē -- Ernest Hemingway

The best bar tape

Old 03-18-21, 07:52 PM
  #1  
croebuck
Junior Member
Thread Starter
 
Join Date: Aug 2020
Location: Newport News, VA
Posts: 8

Bikes: Fuji Gran Fondo Classico (2017)

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Liked 1 Time in 1 Post
The best bar tape

Itís time to change my bar tape. What are your recommendations and what color should go with? I have a Fuji Gran Fondo. The primary color is red with Fuji printed in white along with some silver accents. Iíve been looking at Fizik and Lizard Skins mostly. I want something both comfortable and stylish and I kind of want to make a statement. Iím actually leaning toward white but let me know what you think.
croebuck is offline  
Old 03-18-21, 08:00 PM
  #2  
jaxgtr
Senior Member
 
jaxgtr's Avatar
 
Join Date: Jul 2006
Location: Jacksonville, FL
Posts: 5,007

Bikes: Trek Domane SLR 7, Trek Emonda ALR 6, Trek X-Caliber 8

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 163 Post(s)
Liked 327 Times in 207 Posts
I have Bontrager Sticky Bar Tape on 2 bikes and it is very nice...I used Lizard Skins for about 6 years give or take, but decided to give something else a try.

https://www.trekbikes.com/us/en_US/e...e-set/p/14245/
__________________
Brian | 2021 Trek Domane SLR 7 | 2016 Trek Emonda ALR 6 | 2016 Trek X-Caliber 8
Originally Posted by AEO View Post
you should learn to embrace change, and mock it's failings every step of the way.








jaxgtr is offline  
Old 03-18-21, 08:01 PM
  #3  
Bigbus
Very Senior Member
 
Bigbus's Avatar
 
Join Date: Mar 2018
Location: Always on the Run
Posts: 1,102

Bikes: Giant Quasar & Fuji Roubaix

Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 362 Post(s)
Liked 278 Times in 205 Posts
It would seem like white or red would be color coordinated but blue would make a statement. (White for the added accent with the name)
Bigbus is offline  
Old 03-18-21, 08:09 PM
  #4  
Seattle Forrest
Senior Member
 
Seattle Forrest's Avatar
 
Join Date: Mar 2010
Location: Seattle, WA
Posts: 21,827
Mentioned: 72 Post(s)
Tagged: 0 Thread(s)
Quoted: 14226 Post(s)
Liked 5,273 Times in 3,002 Posts
Never white bar tape.
Seattle Forrest is offline  
Likes For Seattle Forrest:
Old 03-18-21, 08:12 PM
  #5  
bampilot06
Senior Member
 
Join Date: Dec 2019
Location: 757
Posts: 3,559

Bikes: Cervťlo C2, Ritchey Breakaway

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 3108 Post(s)
Liked 1,448 Times in 640 Posts
Originally Posted by jaxgtr View Post
I have Bontrager Sticky Bar Tape on 2 bikes and it is very nice...I used Lizard Skins for about 6 years give or take, but decided to give something else a try.

https://www.trekbikes.com/us/en_US/e...e-set/p/14245/

how was that sticky tape to wrap. I went to buy some a couple months back and the manager at trek did not recommend those after I told him it would be my first time wrapping bars.
bampilot06 is offline  
Old 03-18-21, 09:01 PM
  #6  
jaxgtr
Senior Member
 
jaxgtr's Avatar
 
Join Date: Jul 2006
Location: Jacksonville, FL
Posts: 5,007

Bikes: Trek Domane SLR 7, Trek Emonda ALR 6, Trek X-Caliber 8

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 163 Post(s)
Liked 327 Times in 207 Posts
Originally Posted by bampilot06 View Post
how was that sticky tape to wrap. I went to buy some a couple months back and the manager at trek did not recommend those after I told him it would be my first time wrapping bars.

I had no issues with it....but I have been wrapping my own bars for a while, but I don't think as a first timer you would have issues with it. I put the red on my Domane, but I actually like the white better. When I have to replace it, I will go with the white.


__________________
Brian | 2021 Trek Domane SLR 7 | 2016 Trek Emonda ALR 6 | 2016 Trek X-Caliber 8
Originally Posted by AEO View Post
you should learn to embrace change, and mock it's failings every step of the way.








jaxgtr is offline  
Likes For jaxgtr:
Old 03-18-21, 10:42 PM
  #7  
bampilot06
Senior Member
 
Join Date: Dec 2019
Location: 757
Posts: 3,559

Bikes: Cervťlo C2, Ritchey Breakaway

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 3108 Post(s)
Liked 1,448 Times in 640 Posts
Originally Posted by jaxgtr View Post
I had no issues with it....but I have been wrapping my own bars for a while, but I don't think as a first timer you would have issues with it. I put the red on my Domane, but I actually like the white better. When I have to replace it, I will go with the white.


looks good.
bampilot06 is offline  
Old 03-19-21, 01:14 AM
  #8  
Symox
Senior Member
 
Join Date: Jul 2020
Posts: 295

Bikes: '07 Specialized Roubaix Comp Triple, '12 Gravity Fixie, '21 Liv Rove 4, '06? Giant EB Spirit

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 138 Post(s)
Liked 57 Times in 44 Posts
I like Profile Designs cork bar tape. Simple, many colors available, plenty of cushion and priced right.

I get the black, non adhesive variety - boring but excellent

https://profile-design.com/collectio...ducts/bar-wrap
Symox is offline  
Old 03-19-21, 02:30 AM
  #9  
SoSmellyAir
Method to My Madness
 
Join Date: Nov 2020
Location: Orange County, California
Posts: 344

Bikes: Cannondale Synapse, Trek FX 2

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 151 Post(s)
Liked 105 Times in 75 Posts
My favorite tapes are Profile Designs Drive (Amazon.com : Profile Designs Drive Tape, Electric Blue : Sports & Outdoors) and Fabric Knurl (Amazon.com : Fabric Knurl bar Tape, Green : Sports & Outdoors).

I have used both on my predominantly red bike (Cannondale Synapse Carbon 105 5 Bike - 2017 | REI Co-op). Nothing on my bike is color coordinated. (I would show you guys but I don't know how to post pictures.) In fact, now that I have found tape that I like, next time I might buy two packages of different colors so I can use a different color for each side.

Last edited by SoSmellyAir; 03-19-21 at 02:33 AM.
SoSmellyAir is offline  
Old 03-19-21, 06:00 AM
  #10  
WhyFi
Senior Member
 
WhyFi's Avatar
 
Join Date: Jan 2010
Location: TC, MN
Posts: 34,256

Bikes: R3 Disc, Haanjo

Mentioned: 343 Post(s)
Tagged: 1 Thread(s)
Quoted: 16451 Post(s)
Liked 5,171 Times in 2,697 Posts
Another vote for Grippytack - it's great. When wrapping, you just need to keep good tension going around the curves and pay attention to the direction/overlap; the perforations are only on one edge of the tape.
WhyFi is offline  
Old 03-19-21, 06:23 AM
  #11  
sced
South Carolina Ed
 
Join Date: Mar 2007
Location: Greer, SC
Posts: 3,685

Bikes: Holdsworth Super Mistral Fastback, Macario Pro, Ciocc San Cristobal, Viner Nemo, Cyfac Le Mythique, Giant TCR, Tommasso Mondial, Cyfac Etoile

Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 275 Post(s)
Liked 105 Times in 57 Posts
The $2-$3 tape on Ebay works as well as anything - easy to wrap, cleans easily, enough cushion, lots of colors
sced is offline  
Likes For sced:
Old 03-19-21, 06:43 AM
  #12  
Rides4Beer
Senior Member
 
Join Date: Oct 2018
Location: SC
Posts: 1,400

Bikes: SuperSix Evo | Revolt

Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 702 Post(s)
Liked 750 Times in 392 Posts
Might have been a bad batch, but I had horrible luck with Lizard Skins, kept slipping, rewrapped it several times and then got rid of it. Have Zipp CX on the gravel bike and Supacaz on the road bike, both have been great.
Rides4Beer is offline  
Old 03-19-21, 07:36 AM
  #13  
Kimmo 
bike whisperer
 
Kimmo's Avatar
 
Join Date: Dec 2009
Location: Melbourne, Oz
Posts: 9,101

Bikes: https://weightweenies.starbike.com/forum/viewtopic.php?f=10&t=152015&p=1404231

Mentioned: 14 Post(s)
Tagged: 0 Thread(s)
Quoted: 1150 Post(s)
Liked 424 Times in 306 Posts
The best bar tape is tough enough to survive a small crash, isn't too grippy or slippy, resists edge curling, is strong enough not to break if you need to wrap it tight (stitching is good for that), but not too stiff to conform nicely, and is almost certainly black, or at least the same colour as the hoods. A continuous coating (rather than a stripe in the middle) of that tacky stuff they use these days is the best form of adhesive by far. A pattern of perforations or stitching helps a lot to get an even wrap, particularly if you haven't done it dozens of times.

Budget up to three hours for perfection, depending on difficulty. The second half takes twice as long as the first, if you want it to match.

I like to disconnect the cables and coil them up in a single coil around the stern, which I pull off the steerer. Now you can really get into it properly. While you have the bars off, before taping,might as well check your levers are level with aid of a pane of glass. Also ensure cable housings are nicely seated and securely taped in place while you're here. Most modern tape can resist edge curling pretty well if you wrap top down, the trick is to make it tight. Heaps neater without finishing tape.

Selle Italia Smootape, the 5mm stuff equivalent to a double wrap, gave me the flattest-looking wrap I've ever seen; it looked awesome. Was a total bastard to get it to conform though, it has a rather stiff core, despite being really light (the thinner version is probably much easier, and even lighter). Pretty impressive toughness for a tape with a foam/cork texture too.

I've used other good tapes that were better in other regards or maybe even other aspects of aesthetics, but nothing was such a standout in one regard while also being so good all-round. Bit pricey, but tough and rewrappable.

Last edited by Kimmo; 03-19-21 at 07:49 AM.
Kimmo is offline  
Likes For Kimmo:
Old 03-19-21, 08:41 AM
  #14  
Jeff Neese
Senior Member
 
Join Date: Jul 2014
Posts: 334
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 132 Post(s)
Likes: 0
Liked 37 Times in 24 Posts
As has been pointed out, Lizard Skins are difficult to wrap, but even worse than that is that it doesn't last. I tried it on three bikes a few years ago, two of mine and also my wife's, and all three had started to peel by the end of the season.

Now I use Cinelli Gel Cork tape. It's cheap, easy to use, and it lasts a long time.
Jeff Neese is offline  
Old 03-19-21, 09:24 AM
  #15  
Bigbus
Very Senior Member
 
Bigbus's Avatar
 
Join Date: Mar 2018
Location: Always on the Run
Posts: 1,102

Bikes: Giant Quasar & Fuji Roubaix

Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 362 Post(s)
Liked 278 Times in 205 Posts
Originally Posted by sced View Post
The $2-$3 tape on Ebay works as well as anything - easy to wrap, cleans easily, enough cushion, lots of colors
I couldn't agree more. Plus, if you decide you don't like the color (I hated the blue) it didn't cost an arm and a leg to swap it for the black, which goes good on the bike. No complaints about wear so far either. I did add a cut of inner tube beneath the drop section because I like a thick bar to grab onto. No problems.
Bigbus is offline  
Old 03-19-21, 09:31 AM
  #16  
wgscott
Banned.
 
Join Date: Jul 2013
Location: CZU
Posts: 7,130
Mentioned: 61 Post(s)
Tagged: 0 Thread(s)
Quoted: 2366 Post(s)
Liked 2,226 Times in 1,107 Posts
Originally Posted by jaxgtr View Post
I had no issues with it....but I have been wrapping my own bars for a while, but I don't think as a first timer you would have issues with it. I put the red on my Domane, but I actually like the white better. When I have to replace it, I will go with the white.
Can I bring mine to you? Mine broke while I was putting it on, which is always a delight with $30 bar tape.
wgscott is offline  
Old 03-19-21, 09:35 AM
  #17  
jaxgtr
Senior Member
 
jaxgtr's Avatar
 
Join Date: Jul 2006
Location: Jacksonville, FL
Posts: 5,007

Bikes: Trek Domane SLR 7, Trek Emonda ALR 6, Trek X-Caliber 8

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 163 Post(s)
Liked 327 Times in 207 Posts
Originally Posted by wgscott View Post
Can I bring mine to you? Mine broke while I was putting it on, which is always a delight with $30 bar tape.
Ha, yea I did that with Lizard Skins once....I was less than please. I know when I put this stuff on, I went much slower than normal as I was advised it can be "finicky", I believe the word was.
__________________
Brian | 2021 Trek Domane SLR 7 | 2016 Trek Emonda ALR 6 | 2016 Trek X-Caliber 8
Originally Posted by AEO View Post
you should learn to embrace change, and mock it's failings every step of the way.









Last edited by jaxgtr; 03-19-21 at 09:42 AM.
jaxgtr is offline  
Old 03-19-21, 09:59 AM
  #18  
Moe Zhoost
Half way there
 
Moe Zhoost's Avatar
 
Join Date: Sep 2015
Location: Durham, NC
Posts: 2,446

Bikes: Many, and the list changes frequently

Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 792 Post(s)
Liked 571 Times in 339 Posts
The best tape is the kind that wraps right the first time.
Moe Zhoost is offline  
Old 03-19-21, 10:11 AM
  #19  
TiHabanero
Senior Member
 
Join Date: Nov 2012
Posts: 3,383
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 1210 Post(s)
Liked 510 Times in 279 Posts
"The best tape is the kind that wraps right the first time."

Correction: "The best "taper" is the kind that wraps the tape right the first time."
TiHabanero is offline  
Likes For TiHabanero:
Old 03-19-21, 10:38 AM
  #20  
Psimet2001 
I eat carbide.
 
Psimet2001's Avatar
 
Join Date: Jan 2006
Location: Elgin, IL
Posts: 21,243

Bikes: Lots. Van Dessel and Squid Dealer

Mentioned: 24 Post(s)
Tagged: 0 Thread(s)
Quoted: 1062 Post(s)
Liked 686 Times in 318 Posts
I love Lizard Skinz but it doesn't last more than a season without showing a lot of wear...

Supacaz is another favorite. Super Sticky Kush or whatever weed name they give it. I have used a few different versions of it on different bikes and feels great and wears well.

Regular "cheap" tape - I use Deda Logo black. If I get deals on it I can sell it for $10 in the shop otherwise it's $15 ish. Lasts long enough for most people and the feel is nice. Long haulers that don't like to spend money on bar tape will end up ripping it and using electrical tape to repair it towards the end of the season.
__________________
PSIMET Wheels, PSIMET Racing, PSIMET Neutral Race Support, and 11 Jackson Coffee
Podcast - YouTube Channel
Video about PSIMET Wheels

Psimet2001 is offline  
Old 03-19-21, 11:40 AM
  #21  
Sojodave
Senior Member
 
Sojodave's Avatar
 
Join Date: Apr 2015
Location: Utah
Posts: 548

Bikes: Fezzari Fore CR3 Di2

Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 197 Post(s)
Liked 114 Times in 59 Posts
I really like Ciclovation bar tapes. https://www.ciclovation.com/pro.php?m=l&f=78&cid=78
Sojodave is offline  
Old 03-19-21, 01:02 PM
  #22  
genejockey 
Klaatu..Verata..Necktie?
 
genejockey's Avatar
 
Join Date: May 2007
Location: SF Bay Area
Posts: 5,227

Bikes: Canyon Endurace, 105; Battaglin MAX, Chorus; Bianchi 928 Veloce; Ritchey Road Logic, Dura Ace; Cannondale R500 RX100; Schwinn Circuit, Sante; Lotus Supreme, Dura Ace

Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 2501 Post(s)
Liked 2,448 Times in 1,255 Posts
I like the Fizik Microtex Classic, myself. It's kind of a pain to wrap, but once done it stays put. It's neither sticky nor slippy, it cleans well, and it's comfy. It's a pain to wrap because it's not really stretchy, but on the plus side it's also tough so it's not a problem using a fair amount of tension to keep it flat around the curves.

With a red and white bike, I'd use white - in fact I DID use white on my red and white bike - because you'll never match the red. Same reason not to use red tires on a red bike.

__________________
"Don't take life so serious-it ain't nohow permanent."
genejockey is online now  
Likes For genejockey:
Old 03-19-21, 01:44 PM
  #23  
Moe Zhoost
Half way there
 
Moe Zhoost's Avatar
 
Join Date: Sep 2015
Location: Durham, NC
Posts: 2,446

Bikes: Many, and the list changes frequently

Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 792 Post(s)
Liked 571 Times in 339 Posts
Originally Posted by TiHabanero View Post
"The best tape is the kind that wraps right the first time."

Correction: "The best "taper" is the kind that wraps the tape right the first time."
The best tapers are the ones who start with tape that is long enough for the application so their initial wrap is satisfactory. My experience has been that rolls are more often too short than too long, which is only discovered well into the job.
Moe Zhoost is offline  
Old 03-19-21, 02:58 PM
  #24  
Sy Reene
Advocatus Diaboli
 
Sy Reene's Avatar
 
Join Date: Feb 2015
Location: Wherever I am
Posts: 6,982

Bikes: Merlin Cyrene, Nashbar steel CX

Mentioned: 11 Post(s)
Tagged: 1 Thread(s)
Quoted: 3679 Post(s)
Liked 818 Times in 547 Posts
Originally Posted by Moe Zhoost View Post
The best tapers are the ones who start with tape that is long enough for the application so their initial wrap is satisfactory. My experience has been that rolls are more often too short than too long, which is only discovered well into the job.
+1. This is what could be part of a valuable thread.

Measured lengths of the various bar tapes (sorted by tape thickness), as well indicator of whether or not they provide the patching strips for the shifter clamp area or not. Also worth knowing quality of bar end plugs (plastic, alloy, with/without expander plug). Finishing tape?
Sy Reene is offline  
Old 03-20-21, 12:07 AM
  #25  
SoSmellyAir
Method to My Madness
 
Join Date: Nov 2020
Location: Orange County, California
Posts: 344

Bikes: Cannondale Synapse, Trek FX 2

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 151 Post(s)
Liked 105 Times in 75 Posts
Originally Posted by wgscott View Post
Can I bring mine to you? Mine broke while I was putting it on, which is always a delight with $30 bar tape.
Unfortunately that is part of the tuition in the course of learning how to choose and wrap bar tape, no matter how many YouTube videos one watches on the subject. I wasted a few rolls before being able to do it satisfactorily. Hopefully I still remember how to do at least as well when it comes time to do it again.

Last edited by SoSmellyAir; 03-20-21 at 12:16 AM.
SoSmellyAir is offline  

Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information -

Copyright © 2021 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.