prescription sunglasses
#1
Member
Thread Starter
Join Date: Oct 2006
Posts: 43
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
prescription sunglasses
In order to save some cash I decided to go online and got myself a pair of glasses with inserts- https://www.optical4less.com/index.cg...Fs&mode=clipin
I received it and the quality looks good. The inserts themself seem to be the correct prescription, however when I clip it on and put the glasses on, something feels strange.
1- Does anyone else have experience with this store?
2- Anyone else use inserts and have any advice about them?
3- Anyother places where I can buy rx sunglasses?
I received it and the quality looks good. The inserts themself seem to be the correct prescription, however when I clip it on and put the glasses on, something feels strange.
1- Does anyone else have experience with this store?
2- Anyone else use inserts and have any advice about them?
3- Anyother places where I can buy rx sunglasses?
#2
Senior Member
Join Date: Jul 2006
Posts: 2,418
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
What is your prescription? Curved lenses most often have a 2.00 cylinder limitation and you get distortion around the edges. Some standard lenses go to 3.00 and their is one provider that has proprietary technology to cut more extreme lenses. If you have a severe astigmatism, mine is 2.50 in one eye, you have to be careful. At least that is what I am running into doing my research. I have not purchased yet. I was quoted $394, one set of prescription lenses with transitions shading, on the internet and thought that was high. I have been quoted $443, two sets of lenses, grey and clear, for Smith's retail and over $500 by the specialist on the internet for Rudy Project, two lenses. I am going to the local retailer and see if I can find some Rudy Project or Adidas standard inserts for less that will accomodate my astigmatism. I have been advised that Adidas are not high quality. I may just have to keep my old, bulky Bolle's that still work
#3
SLJ 6/8/65-5/2/07
Let me preface by stating that I'm not a Wal-Mart fan and would rather not shop there if possible but....
I picked up a pair of Rx shades made by, I'm pretty sure Rec-Spec (at least that's what the case they came in says), for $124 complete. Heck, they're even polarized, a feature that seems rare on even top line Oakleys or Rudys. (Geez, it's not like they're meant to be used outdoors or anything )
Anyways that's the deal. I wear WalMart shades but they fit & work quite nicely and the price was more than right.
I picked up a pair of Rx shades made by, I'm pretty sure Rec-Spec (at least that's what the case they came in says), for $124 complete. Heck, they're even polarized, a feature that seems rare on even top line Oakleys or Rudys. (Geez, it's not like they're meant to be used outdoors or anything )
Anyways that's the deal. I wear WalMart shades but they fit & work quite nicely and the price was more than right.
__________________
“Life is not one damned thing after another. Life is one damned thing over and over.”
Edna St. Vincent Millay
“Life is not one damned thing after another. Life is one damned thing over and over.”
Edna St. Vincent Millay
#4
Double Secret Probation
Join Date: Aug 2005
Location: Eastern Indiana
Posts: 2,578
Bikes: Madone 6 series SSL, Cannondale CX9, Trek TTX, Trek 970, Trek T2000
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 4 Times
in
4 Posts
I just ordered a pair of Tifosi glasses with ****io lens (for my strong Rx). The ****io len runs about double the normal Rx lens, but still I'm out the door for less then $300 for a nice frame and super lens.
https://www.solatechnologies.com/prod...optics/****io/
I didn't have a local dealer so emailed Tifosi directly and they took care of all the details.
https://www.tifosioptics.com/rx/index.html
https://www.solatechnologies.com/prod...optics/****io/
I didn't have a local dealer so emailed Tifosi directly and they took care of all the details.
https://www.tifosioptics.com/rx/index.html
__________________
Time to Ride...
Time to Ride...
#5
no longer a newbie
Join Date: Jul 2006
Posts: 181
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
vman1-
Several things could be causing the problem:
1. even if the lens power is correct, the vertex distance (distance from cornea to back lens surface) of the clip/frame combination) could be off. Check and compare with a pair of your current specs - you may find that the new pair has a vertex distance greater than your current acceptable specs. If you are nearsighted, result will be vision that is not as clear and sharp as current specs
2. new clip/frame combo may be fitting in a manner that causes the bottom of the frame is too far away from your face (aka "retroscopic tilt"). Symptoms - feeling of the floor (or pavement!) swooping away and downward, sort of like stepping into a hole. Can be resolved by having frame, or clip attachment point (if possible) adjusted to add pantoscopic tilt, making the back lens surface closer to your face.
3. If the pupilary distance was not correctly achieved by the lab, problems can occur.
Bottom line, without the advice of a competent professional prior to fabrication, there is always the risk of something being less than perfect with this type of product. If you have a good relationship with your current eye care professional, have them take a look, check the finished r/x and fit, and give you some advice on how to proceed.
Several things could be causing the problem:
1. even if the lens power is correct, the vertex distance (distance from cornea to back lens surface) of the clip/frame combination) could be off. Check and compare with a pair of your current specs - you may find that the new pair has a vertex distance greater than your current acceptable specs. If you are nearsighted, result will be vision that is not as clear and sharp as current specs
2. new clip/frame combo may be fitting in a manner that causes the bottom of the frame is too far away from your face (aka "retroscopic tilt"). Symptoms - feeling of the floor (or pavement!) swooping away and downward, sort of like stepping into a hole. Can be resolved by having frame, or clip attachment point (if possible) adjusted to add pantoscopic tilt, making the back lens surface closer to your face.
3. If the pupilary distance was not correctly achieved by the lab, problems can occur.
Bottom line, without the advice of a competent professional prior to fabrication, there is always the risk of something being less than perfect with this type of product. If you have a good relationship with your current eye care professional, have them take a look, check the finished r/x and fit, and give you some advice on how to proceed.
#6
Senior Member
Join Date: Aug 2006
Location: Perth, W.A.
Posts: 935
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
My optometrist told me that it is not possible to simply make an insert lens up to the same prescription as you would use for your regular glasses, due to the different distance from cornea to back lens surface on the insert (which sits closer to your face than normal eyewear). You have to modify the prescription a bit. Because inserts are a lot less common than regular prescription glasses, some dispensing opticians don't know this and may just make the insert up to your normal prescription. You need to be sure that the optician knows what they are doing, or the end result will be wrong. Did you just give the online store your regular prescription, or did an optometrist prescribe the insert strength?
Having said that, my inserts (supposedly made up correctly) still do feel just slightly weird when I first put them on, but I get used to it within a minute or so.
Having said that, my inserts (supposedly made up correctly) still do feel just slightly weird when I first put them on, but I get used to it within a minute or so.
Last edited by scirocco; 11-30-06 at 11:11 PM.
#7
no longer a newbie
Join Date: Jul 2006
Posts: 181
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
...My optometrist told me that it is not possible to simply make an insert lens up to the same prescription as you would use for your regular glasses, due to the different distance from cornea to back lens surface on the insert (which sits closer to your face than normal eyewear)...
Exactly my point regarding vertex distance, and the effect is amplified by the actual power of the r/x...the higher the power, the greater the change.
Typical "acceptable" vertex distance ranges from 11 to 13.5 mm, and is based on the instrumentation used by the examining professional. The distance is rarely specified in the written r/x, unless the lens power high, typically > + or - 10 diopters. However, if the r/x is compound, with a large amount of oblique cylinder (correction for astigmatism), or a person is sensitive to change, any deviation from the norm will not be tolerated, or "feel strange"....
Exactly my point regarding vertex distance, and the effect is amplified by the actual power of the r/x...the higher the power, the greater the change.
Typical "acceptable" vertex distance ranges from 11 to 13.5 mm, and is based on the instrumentation used by the examining professional. The distance is rarely specified in the written r/x, unless the lens power high, typically > + or - 10 diopters. However, if the r/x is compound, with a large amount of oblique cylinder (correction for astigmatism), or a person is sensitive to change, any deviation from the norm will not be tolerated, or "feel strange"....
#8
Member
Thread Starter
Join Date: Oct 2006
Posts: 43
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
[QUOTE=89quattro]vman1-
2. new clip/frame combo may be fitting in a manner that causes the bottom of the frame is too far away from your face (aka "retroscopic tilt"). Symptoms - feeling of the floor (or pavement!) swooping away and downward, sort of like stepping into a hole. Can be resolved by having frame, or clip attachment point (if possible) adjusted to add pantoscopic tilt, making the back lens surface closer to your face.
This is exactly what I am feeling!!!!. however I cannot adjust the clip attachment point... looks like I will have to write of the $60 and go get another pair...
2. new clip/frame combo may be fitting in a manner that causes the bottom of the frame is too far away from your face (aka "retroscopic tilt"). Symptoms - feeling of the floor (or pavement!) swooping away and downward, sort of like stepping into a hole. Can be resolved by having frame, or clip attachment point (if possible) adjusted to add pantoscopic tilt, making the back lens surface closer to your face.
This is exactly what I am feeling!!!!. however I cannot adjust the clip attachment point... looks like I will have to write of the $60 and go get another pair...
#9
Senior Member
Join Date: Mar 2005
Location: Athens, GA
Posts: 172
Bikes: Lemond Reno, Giant CFM 2, Lotus, Haro (for the trainer)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I got some curved prescription sunglasses from a regular eye glass place, and they are fine except that everything looks tiny. I mean, I can read distant signs easily, but when I'm on the bike and I look down at a beer can on the side of the road it looks as though the can is no taller than the width of my hand.
I've gotten used to it, and I'm not going to return them, but it is an odd sensation.
On the upside I do feel like a giant.
I've gotten used to it, and I'm not going to return them, but it is an odd sensation.
On the upside I do feel like a giant.
#10
Administrator
Join Date: Feb 2005
Location: Delaware shore
Posts: 13,558
Bikes: Cervelo C5, Guru Photon, Waterford, Specialized CX
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 1106 Post(s)
Liked 2,174 Times
in
1,465 Posts
I strongly encourage anyone needing sunglasses with prescriptions to use someone like this:
www.eyesport.com
Inserts cause all sorts of vision problems as others have mentioned, plus they can fog.
www.eyesport.com
Inserts cause all sorts of vision problems as others have mentioned, plus they can fog.
#11
Junior Member
Join Date: Jan 2004
Posts: 7
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I'm extremely picky about my glasses, and recently purchased a set of Rudy Project Horus glasses with interchageable prescription polarized and prescription clear lens with which I'm very happy. The customer service agent (Bambi) at SportRX was helpful and the glasses came quickly. Check out their website at www.bicyclerx.com.
#12
It's MY mountain
Join Date: Sep 2006
Location: Mt.Diablo
Posts: 10,002
Bikes: Klein, Merckx, Trek
Mentioned: 70 Post(s)
Tagged: 0 Thread(s)
Quoted: 4338 Post(s)
Liked 2,980 Times
in
1,617 Posts
Bolles with inserts worked OK for me until I started needing progressive lenses to read my computer and route sheets. These Tag Heuer glasses work very well in my prescription for ~$380. The nosepads and arms both adjust for a good fit.
Last edited by DiabloScott; 12-01-06 at 03:31 PM.
#13
Senior Member
Join Date: Jul 2006
Posts: 2,418
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
Originally Posted by DiabloScott
Bolles with inserts worked OK for me until I started needing progressive lenses to read my computer and route sheets. These Tag Heuer glasses work very well in my prescription for ~$380. The nosepads and arms both adjust for a good fit.
#16
Senior Member
Join Date: Oct 2006
Location: Chula Vista, San Diego
Posts: 219
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I use these for now https://www.nashbar.com/profile.cfm?c...All%20Products
I will eventually purchase Rudy projects
I will eventually purchase Rudy projects
#17
It's MY mountain
Join Date: Sep 2006
Location: Mt.Diablo
Posts: 10,002
Bikes: Klein, Merckx, Trek
Mentioned: 70 Post(s)
Tagged: 0 Thread(s)
Quoted: 4338 Post(s)
Liked 2,980 Times
in
1,617 Posts
Originally Posted by dekindy
What model are these and where did you get them? I have a pair of Bolle Edge with prescription inserts and have bifocals, maybe should have gotten progressives, and believe I am in the situation as you. I have an astigmatism and keep running up against the 2.00 cylinder limitation.
These are Tag Heuer 27 Degree glasses (I have no idea what that name means). My prescrip is for 1.50 cylinder so I'm not sure they'll work for you either, I don't see a limitation listed. What cylinder value do you need? I wonder what would happen if you needed 2.20 but got the prescip for 2.00 - my guess is you'd be way better off than distance-only insert lenses behind your Paroles.
Try this site : https://store.performanceeyewear.com/...endations.html and click on the e-mail link under "ask the expert". The eye dr there is really good with e-mail response.
Last edited by DiabloScott; 12-03-06 at 12:12 PM.