Bike Forums

Bike Forums (https://www.bikeforums.net/forum.php)
-   Road Cycling (https://www.bikeforums.net/road-cycling/)
-   -   Threadless Stem Suggestions Needed (https://www.bikeforums.net/road-cycling/274319-threadless-stem-suggestions-needed.html)

markwebb 03-03-07 08:31 PM

Threadless Stem Suggestions Needed
 
I need a 1" threadless steerer tube stem/26 mm clamp handlebar size stem with a lot of angle. I need to get my bars up higher. I tried a Dimension steerer tube adapter but it did not fit quite right. If I can find a cool 1" stem with a lot of angle that would help.

Any suggestions let me know. Thanks.

the beef 03-03-07 08:36 PM

Just find a 1" to 1 1/8" shim that works. Plenty lying around everywhere, ask your bike shop for one. There are hardly any 1" threadless stems out there; conversely, there are many 1 1/8" threadless stems to choose from (and definitely one with the amount of angle you need).

barba 03-03-07 08:40 PM

Yeah, the 1" threadless stem is a rare beast. Luckily, almost every 1 1/8" stem comes with the shim. I use a Ritchey Pro and like it, but I would also look at Thomson. I just think they are cool.

markwebb 03-03-07 09:45 PM

Please suggest stems with a lot of angle so I can effectively raise the bars by an inch or so. That was purpose and need to post. Thanks - help is greatly appreciated.

brianallan 03-03-07 10:08 PM

I have access to about 3.4 million of them. Do you have any used bike shop places in your area? A place like www.bicas.org should be able to do you right.

barba 03-04-07 07:43 AM


Originally Posted by markwebb
Please suggest stems with a lot of angle so I can effectively raise the bars by an inch or so. That was purpose and need to post. Thanks - help is greatly appreciated.

I guess we would need to know what you have now. Higher than what?

Really, I would just go to a shop if you don't know exactly what you want in angle and length. They will probably let you try a few to see what is most comfortable for you.

Thrifty1 03-04-07 10:01 AM

These come with a 1 1/8' to 1" shim......
http://aebike.com/page.cfm?PageID=30...id=9398&type=T

Thrifty1 03-04-07 10:03 AM


Originally Posted by markwebb
I need a 1" threadless steerer tube stem/26 mm clamp handlebar size stem with a lot of angle. I need to get my bars up higher. I tried a Dimension steerer tube adapter but it did not fit quite right. If I can find a cool 1" stem with a lot of angle that would help.

Any suggestions let me know. Thanks.


http://www.loosescrews.com/index.cgi...id=85109821952

markwebb 03-04-07 01:51 PM

Thanks Thrifty. The aebike link may be what I needed. Thanks.


All times are GMT -6. The time now is 12:57 PM.


Copyright 2018 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.